Downfall
This combination provides smooth gameplay with an average of 71 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 27 | 43 | 52 | 61 |
| 1440p QHD | 43 | 66 | 78 | 95 |
| 1080p Full HD | 55 | 93 | 110 | 137 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Downfall with AMD Ryzen 7 7800X3D + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis
FAQ
Q: What is the overall ranking of this CPU-GPU combo in Downfall?
A: The AMD Ryzen 7 7800X3D paired with the NVIDIA GeForce RTX 3050 4 GB ranks 1557 out of 1741 tested combos in Downfall, placing it in the lower portion of the database for this specific title.
Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?
A: The Ryzen 7 7800X3D has an average benchmark score of 31580, which is only 0.1% ahead of the Intel Core i7-12700F (31543), 0.3% ahead of the AMD Ryzen 9 5980HX (31495), and 0.6% ahead of both the AMD Ryzen 7 8700G (31407) and AMD Ryzen 7 7745HX (31402). The margin between all four rivals is extremely tight.
Q: What memory configuration does the GPU use, and how does it affect performance?
A: The RTX 3050 4 GB uses 4 GB of GDDR6 memory on a 128-bit bus, delivering 192.0 GB/s of bandwidth. This limited capacity becomes a critical factor at higher resolutions, as the measured FPS drops sharply when moving from 1080p to 4K.
Q: What is the best 4K result recorded for this combo?
A: The highest average FPS at 3840x2160 is 60.5, achieved at Low settings. Medium yields 51.7 FPS, High drops to 42.5, and Ultra falls to 27.2 — a clear sign that the GPU struggles with the memory demands of 4K.
Q: Does the CPU have integrated graphics that could assist in this game?
A: Yes, the Ryzen 7 7800X3D includes Radeon Graphics as integrated graphics, but the measured data relies on the discrete RTX 3050 4 GB. The iGPU is not a factor in the benchmark results shown.
Q: What is the launch MSRP of the GPU and its production status?
A: The RTX 3050 4 GB had a launch MSRP of 199 USD and is currently marked as end-of-life. The CPU, meanwhile, launched at $449, with the combination representing a mid-range GPU paired with a high-end processor.
How This Combo Ranks
The combo rank of 1557 out of 1741 places this pairing in the bottom 11% of all tested configurations for Downfall. That is a surprising position given the CPU’s strength — the Ryzen 7 7800X3D sits at the 87th percentile among all CPUs, with a robust 8-core, 16-thread design. The bottleneck is unmistakably the GPU. The RTX 3050 4 GB sits at the 50th percentile among all GPUs, and its modest 4 GB frame buffer becomes a severe constraint in a horror title that appears to demand more video memory at higher settings.
The data suggests that this combo is heavily imbalanced. In synthetic CPU tests, the Ryzen 7 7800X3D scores 29149 in Cinebench R23 multi-core and 4115 in single-core, showing it can handle almost any game logic or physics load. Yet the GPU’s 7.127 TFLOPS FP32 performance and 192.0 GB/s bandwidth are simply not enough to translate that CPU power into playable frame rates at higher quality presets. The rank reflects a system where the processor is overqualified relative to the graphics card, particularly for a game like Downfall that appears to be GPU-limited based on the FPS scaling patterns.
GPU Role
The NVIDIA GeForce RTX 3050 4 GB is the defining component in this pairing, and its limitations are evident throughout the measured data. The GPU features 2048 shading units, 64 TMUs, and 32 ROPs, with base and boost clocks of 1545 MHz and 1740 MHz respectively. Memory runs at 1500 MHz (12 Gbps effective), delivering that 192.0 GB/s bandwidth across a 128-bit bus. With only 4 GB of GDDR6, the card relies on a relatively narrow memory path, and this becomes a wall at higher resolutions.
At 1080p, the GPU can push respectable numbers — 137 FPS at Low, 110 at Medium, and 93 at High. But Ultra drops to 54.6, a 60% reduction from Low. At 1440p, the pattern repeats: 94.8 FPS at Low, 77.6 at Medium, 66.3 at High, and 42.6 at Ultra. At 4K, the card clearly hits its memory ceiling: 60.5 FPS at Low, 51.7 at Medium, 42.5 at High, and a barely playable 27.2 at Ultra. The 4 GB capacity likely forces texture swapping or lower effective memory utilization at 4K, explaining the steep falloff.
The GPU’s 16 ray tracing cores and 64 tensor cores are present, but Downfall’s horror aesthetic may not leverage them heavily — the measured FPS suggests traditional rasterization load dominates. The card’s 90 W TDP and dual-slot design indicate an entry-level power profile, which aligns with its end-of-life status and modest 199 USD launch MSRP.
Measured FPS Breakdown
At 1920x1080, the combo delivers its best results. Low settings produce 137 FPS average, which is exceptionally smooth. Medium drops to 110, High to 93, and Ultra falls to 54.6. The gap between High and Ultra is 38.4 FPS, indicating a significant settings penalty. At 2560x1440, the numbers scale down proportionally: Low hits 94.8, Medium 77.6, High 66.3, and Ultra 42.6. The Ultra result at 1440p is below the 60 FPS threshold many consider playable.
At 3840x2160, the GPU struggles more visibly. Low achieves 60.5 FPS, just above the playability line, but Medium drops to 51.7, High to 42.5, and Ultra to 27.2. The 4K Ultra result is nearly unplayable, representing a 36 FPS difference from 1080p Ultra. Across all resolutions, the pattern is consistent: Low settings are always playable, Medium is borderline at 4K, High is only smooth at 1080p, and Ultra is only viable at 1080p.
The data shows no min or max FPS values, so the analysis relies solely on averages. Still, the averages tell a clear story of a GPU that cannot sustain high quality at high resolutions.
Resolution Scaling
The FPS drop from 1080p to 4K reveals the limiting component. At Low settings, the average FPS falls from 137 at 1080p to 94.8 at 1440p to 60.5 at 4K — a 56% reduction from 1080p to 4K. At Medium, the drop is from 110 to 77.6 to 51.7, a 53% reduction. At High, it goes from 93 to 66.3 to 42.5, a 54% reduction. At Ultra, the numbers are 54.6, 42.6, and 27.2, a 50% reduction.
These reductions are relatively consistent across settings, hovering around 50-56% from 1080p to 4K. This consistency suggests the GPU is the primary constraint — the CPU, with its 8 cores and 96 MB L3 cache, is not introducing a variable bottleneck. If the CPU were limiting, the percentage drop would likely be smaller at lower resolutions, where the GPU is less stressed. Instead, the scaling is uniform, pointing to memory bandwidth and capacity as the key factors.
The 4 GB frame buffer is the likely culprit at 4K. With 192.0 GB/s bandwidth, the card cannot feed enough data to the 2048 shading units at higher pixel counts. The result is that even Low settings at 4K barely reach 60 FPS, while Ultra at 4K drops to less than half that. For a horror game like Downfall, which may rely on dense textures and lighting effects, this memory limitation is decisive.
CPU Role
The AMD Ryzen 7 7800X3D is a powerhouse that is largely underutilized in this pairing. With 8 cores and 16 threads, base clock of 4.20 GHz, and boost clock of 5.00 GHz, it provides ample processing headroom. The 96 MB shared L3 cache is a standout feature, and its synthetic scores confirm strength: 29149 in Cinebench R23 multi-core, 12242 in R20, and 2938 in R15. Single-thread performance is equally solid, with 4115 in Cinebench R23 single-core and 2725 in Geekbench single-core.
In Downfall, the CPU’s role appears minimal based on the FPS scaling. The benchmark results show that reducing resolution from 1080p to 4K consistently reduces FPS by roughly half, regardless of settings. If the CPU were a bottleneck, we would expect to see the FPS plateau at lower resolutions — for instance, 137 FPS at 1080p Low might not improve much if the CPU were maxed out. The fact that 1080p Low hits 137 FPS suggests the CPU is not limiting at that point, leaving the GPU as the sole constraint.
The 7800X3D’s 120 W TDP and 5 nm process node make it efficient, but in this context, that efficiency is wasted. The CPU’s 87th percentile ranking among all CPUs contrasts sharply with the GPU’s 50th percentile, creating an imbalance. For a horror game that likely has moderate CPU demands, the 7800X3D is overkill, and the measured data reflects that — the GPU dictates performance at every resolution and settings level.
Settings Recommendations
Based on the measured FPS rows, the best experience balances smoothness with visual quality. At 1920x1080, High settings at 93 FPS offer strong performance with good visuals, while Medium at 110 FPS provides an even safer margin for demanding scenes. Ultra at 1080p drops to 54.6, which is borderline for a horror game where consistent frame pacing matters for atmosphere.
At 2560x1440, Medium at 77.6 FPS is the recommended choice — it stays well above 60 FPS and preserves acceptable detail. High at 66.3 is playable but leaves less headroom, while Low at 94.8 sacrifices too much visual fidelity for marginal benefit. Ultra at 42.6 is not recommended for smooth gameplay.
At 3840x2160, Low at 60.5 FPS is the only setting that hits the 60 FPS target, and it does so barely. Medium at 51.7 is playable but may feel sluggish in tense moments. High at 42.5 and Ultra at 27.2 are both below playable thresholds. For 4K, the data suggests that Low is the only viable option, and users should accept significant visual compromises.
Overall, the sweet spot is 1080p High or 1440p Medium. Both deliver over 60 FPS with acceptable quality. If the player prioritizes frame rate above all, 1080p Low at 137 FPS is the maximum smoothness available. The Ultra preset is only worth using at 1080p, and even then, the 54.6 average is risky for a horror title that may have sudden performance spikes.
Hardware Specifications
AMD Ryzen 7 7800X3D
NVIDIA GeForce RTX 3050 4 GB
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 7800X3D + NVIDIA GeForce RTX 3050 4 GB in Downfall
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 60.5 |
| 3840x2160 | Medium | 51.7 |
| 3840x2160 | High | 42.5 |
| 3840x2160 | Ultra | 27.2 |
| 2560x1440 | Low | 94.8 |
| 2560x1440 | Medium | 77.6 |
| 2560x1440 | High | 66.3 |
| 2560x1440 | Ultra | 42.6 |
| 1920x1080 | Low | 137.0 |
| 1920x1080 | Medium | 110.0 |
| 1920x1080 | High | 93.0 |
| 1920x1080 | Ultra | 54.6 |
Downfall with RTX 3050 4 GB + Other CPUs
See how Downfall performs with the same GPU but different processors.
Other Games with Ryzen 7 7800X3D + RTX 3050 4 GB
Explore FPS benchmarks for other games using this same hardware combination.