Inside

The AMD Ryzen 7 5700 paired with the NVIDIA GeForce RTX 4070 Ti SUPER delivers an exceptionally smooth experience in Inside, a puzzle platformer from 2016. The benchmark data shows that this combination is heavily GPU-bound at higher resolutions, yet the sheer horsepower on hand means that even the most demanding settings remain far beyond the threshold of playability. The following analysis breaks down the performance metrics, scaling behavior, and component roles based strictly on the measured data.

Resolution Scaling

The frame rate data reveals a clear and predictable pattern as resolution increases from 1920x1080 to 3840x2160. At the High preset, the average frame rate drops from 232 FPS at 1080p to 195 FPS at 1440p, and finally to 123 FPS at 4K. This represents a 47% reduction in performance when moving from 1080p to 4K, indicating that the rendering load scales significantly with pixel count. The Low preset shows a similar trend, with average FPS falling from 302 at 1080p to 270 at 1440p and 231 at 4K, a 23.5% drop across the full resolution range.

The Medium preset provides the most complete data, including minimum and maximum frame rates. At 1080p, the average is 278 FPS with a minimum of 237 FPS and maximum of 320 FPS. Moving to 1440p, the average drops to 249 FPS, with the minimum falling to 212 FPS and maximum to 287 FPS. At 4K, the average is 196 FPS, with a minimum of 167 FPS and maximum of 226 FPS. The gap between minimum and maximum frame rates narrows as resolution increases — a 83 FPS spread at 1080p becomes a 59 FPS spread at 4K — which suggests that the frame pacing becomes more consistent when the GPU is under heavier load.

This scaling behavior points to the GPU as the primary limiting factor at 4K. The RTX 4070 Ti SUPER’s 16 GB of GDDR6X memory and 672.3 GB/s of bandwidth are sufficient to feed the rendering pipeline, but the raw compute throughput of 44.10 TFLOPS FP32 is what ultimately dictates the ceiling. At 1080p, the frame rates are so high that the CPU’s role becomes more prominent, though the Ryzen 7 5700’s 8 cores and 16 threads are clearly up to the task, as evidenced by the 302 FPS result on Low settings.

How This Combo Ranks

The combination of the Ryzen 7 5700 and RTX 4070 Ti SUPER achieves a rank of 759 out of 3716 tested combos in Inside. This places it in the top 20.4% of all configurations tested, which is a strong result for a game that is not particularly demanding by modern standards. The high ranking is attributable to the GPU’s exceptional rasterization performance rather than the CPU, given that Inside is a puzzle platformer with relatively simple geometry and physics.

The CPU’s individual benchmark scores provide context for its contribution. In Cinebench R23, the Ryzen 7 5700 scores 20,655 points in multi-core and 2,916 points in single-core. These are respectable numbers that place the CPU in the 78th percentile of all CPUs tested. However, the nearest rivals in the CPU benchmark database — the Intel Xeon D-2752TER, AMD Ryzen 5 7640U, AMD Ryzen 5 6600H, and AMD Ryzen 7 5825U — all score within 0.3% of the Ryzen 7 5700’s average score of 25,517. This indicates that the CPU is mid-pack in the broader ecosystem, but for Inside, it is more than sufficient to avoid bottlenecking the GPU.

The GPU’s ranking is slightly lower, at the 76th percentile, but its nearest rivals are all professional or workstation-class cards like the NVIDIA Quadro M5000, NVIDIA GRID M60-1Q, NVIDIA RTX PRO 4500 Blackwell, and NVIDIA TITAN RTX. The RTX 4070 Ti SUPER’s average benchmark score of 31,087 is within 1.9% of these competitors, which underscores its position as a high-end consumer card that trades blows with much more expensive professional hardware.

GPU Role

The NVIDIA GeForce RTX 4070 Ti SUPER is the dominant component in this pairing, and its specifications explain why. Built on the Ada Lovelace architecture with a 5 nm process at TSMC, the GPU packs 8,448 shading units, 264 texture mapping units, and 96 raster output units. The boost clock of 2610 MHz and base clock of 2340 MHz are high for a 40-series card, contributing to the 44.10 TFLOPS of FP32 compute. The memory subsystem is also robust, with 16 GB of GDDR6X on a 256-bit bus delivering 672.3 GB/s of bandwidth.

In Inside, the GPU’s role is most evident in the resolution scaling data. At 1080p with Low settings, the 302 FPS average suggests the GPU is not fully utilized, as the CPU and game logic likely impose a ceiling. However, at 4K with Ultra settings, the 117 FPS average indicates the GPU is working near its limits. The VRAM capacity of 16 GB is far beyond what Inside requires, even at 4K, so memory capacity is never a constraint. Instead, the limiting factor is the raw pixel throughput, which is reflected in the 250.6 GPixel/s pixel rate.

The GPU’s DirectX 12 Ultimate support and Vulkan 1.4 API compatibility ensure that Inside runs efficiently, though the game’s 2016 release predates many modern rendering techniques. The 66 ray tracing cores and 264 tensor cores are present but largely unused in this title, as Inside does not employ ray-traced effects. This means the RTX 4070 Ti SUPER is effectively operating as a pure rasterization powerhouse, which is exactly where it excels.

FAQ

Q: What is the maximum average frame rate achievable with this combo?

A: The highest recorded average frame rate is 302 FPS, achieved at 1920x1080 with Low settings. This demonstrates that the combination is capable of extreme frame rates at lower resolutions.

Q: How does the 4K Ultra performance compare to 1080p Ultra?

A: At 4K Ultra, the average frame rate is 117 FPS, while at 1080p Ultra it is 228 FPS. This represents a 48.7% reduction in performance, indicating a significant scaling cost for the higher resolution.

Q: Is the RTX 4070 Ti SUPER’s 16 GB VRAM sufficient for this game?

A: Yes, the 16 GB of GDDR6X memory is more than adequate for Inside. Even at 4K Ultra, the game does not approach the memory capacity, as evidenced by the 117 FPS average, which is limited by compute throughput rather than memory bandwidth or capacity.

Q: What is the combo’s ranking among all tested configurations?

A: The combo ranks 759th out of 3,716 tested combinations, placing it in the top 20.4% of all systems tested for Inside.

Q: How does the CPU’s performance compare to its nearest rivals?

A: The Ryzen 7 5700 has an average benchmark score of 25,517, which is within 0.3% of its nearest rivals, including the Intel Xeon D-2752TER and AMD Ryzen 5 6600H. This shows the CPU is competitively positioned in its segment.

Q: Which settings preset provides the most consistent frame pacing at 4K?

A: The Medium preset at 4K shows a minimum of 167 FPS and maximum of 226 FPS, a 59 FPS spread. This is the only 4K preset with complete frame data, and the spread indicates good consistency.

Settings Recommendations

Based on the measured frame rate data, the Medium preset offers the best balance of visual fidelity and performance for this combination. At 4K, Medium produces an average of 196 FPS with a minimum of 167 FPS, which is far above the threshold for smooth gameplay. The High preset at 4K drops to 123 FPS average, which is still playable but represents a 37% performance penalty over Medium without a proportional visual improvement, given that Inside uses a distinctive art style that does not rely heavily on modern graphical effects.

For users with 1440p displays, the High preset at 195 FPS is the recommended choice, as it provides a substantial visual upgrade over Medium’s 249 FPS without any risk of dropping below 60 FPS. At 1080p, even the Ultra preset delivers 228 FPS, so users can max out the settings without concern. The Low preset is only justifiable for competitive play or extremely high refresh rate displays, as it pushes frame rates to 302 FPS at 1080p and 231 FPS at 4K, but the visual compromise is significant.

The Ultra preset, while technically playable at all resolutions, shows the steepest performance cost. At 4K, it averages 117 FPS, which is 40% slower than Medium. Given that Inside is a slow-paced puzzle platformer, the extra visual detail from Ultra is unlikely to enhance the experience meaningfully over High or Medium. Therefore, Medium at 4K, High at 1440p, and Ultra at 1080p represent the optimal settings per resolution.

CPU Role

The AMD Ryzen 7 5700 is a Zen 3 architecture processor built on TSMC’s 7 nm process, featuring 8 cores and 16 threads. Its base clock of 3.70 GHz and boost clock of 4.60 GHz are healthy for a 65 W TDP part, and the 16 MB L3 cache provides adequate bandwidth for gaming workloads. In synthetic benchmarks, the CPU scores 20,655 in Cinebench R23 multi-core and 2,916 in single-core, placing it in the 78th percentile of all CPUs.

In Inside, the CPU’s role is secondary to the GPU, but it is not negligible. The game’s puzzle mechanics and physics calculations are likely single-threaded or lightly threaded, which is why the CPU’s single-core performance of 3,296 in PassMark is more relevant than its multi-core score. The 16 threads ensure that any background tasks or game logic threads are handled without contention, but the frame rate data suggests that the CPU is never the bottleneck.

At 1080p Low, the 302 FPS average likely approaches the CPU’s limit for this game, as the GPU is capable of much higher frame rates in lighter scenes. The fact that the 1080p Low result is only 10% higher than the 1080p High result (302 vs 232 FPS) indicates that the CPU is starting to limit performance at very high frame rates, but this is a non-issue in practice. The Ryzen 7 5700’s nearest rivals in the benchmark database all score within 0.3% of its average, confirming that it is a solid mid-range CPU that pairs well with a high-end GPU like the RTX 4070 Ti SUPER without introducing a meaningful bottleneck in this title.