Inside

The AMD Ryzen 5 5500X3D paired with the NVIDIA GeForce RTX 5090 places at rank 744 out of 2887 tested combos for Inside, placing it comfortably in the top 26% of all configurations. This is a strong showing for a puzzle platformer, a genre that typically does not stress high-end hardware. The ranking indicates that this combination is significantly overpowered for the game's demands, landing in the upper quartile of performance. Benchmark results suggest the GPU is doing the heavy lifting, but the CPU is more than capable of keeping pace without creating a bottleneck.

How This Combo Ranks

The combo's rank of 744 out of 2887 tested configurations puts it in the 74th percentile of all pairings. This is a position of strength, but not the absolute top, which makes sense given the game's age and the raw power of the RTX 5090. For a title like Inside, which is a side-scrolling puzzle platformer, the data indicates that most of the tested combinations will achieve high frame rates. This particular combo sits well above the median, meaning it will deliver an exceptionally smooth experience in the vast majority of scenarios.

What is more telling than the rank itself is the headroom this combo possesses. The measured FPS data shows that even at the highest settings and resolution, the frame rate does not drop below 143 FPS. The fact that this combo ranks 744th suggests that the hardware is hitting a performance ceiling that is not limited by its own capabilities, but rather by the game's engine or the synchronization of the display. In less demanding scenes, the frame rate will likely be limited by the monitor's refresh rate rather than the hardware.

The CPU's individual performance percentile of 85 against all CPUs, along with an average benchmark score of 37018, indicates that the Ryzen 5 5500X3D is a solid mid-range performer. It sits within a 0.3% delta of rivals like the AMD Ryzen 5 5600F and the Intel Core i9-12900T, confirming that its processing power is well within the expected range for this tier. The GPU, with a percentile of 92 against all GPUs and an average benchmark score of 79842, is clearly the dominant component in this pairing, and its performance is what pushes the combo into the upper echelons of the ranking.

GPU Role

The NVIDIA GeForce RTX 5090 is the primary driver of the exceptional frame rates seen in these benchmark results. With a massive 32 GB of GDDR7 memory on a 512-bit bus, the memory bandwidth of 1.79 TB/s is more than sufficient for Inside, a game that will not come close to exhausting this capacity. The GPU's clock speeds, with a base of 2017 MHz and a boost of 2407 MHz, are high, but the data suggests that for this title, the sheer compute power is what matters most.

The RTX 5090's benchmark scores are impressive, with a Passmark G3D score of 39650 and a Geekbench Vulkan score of 376728. These numbers place it in the 92nd percentile of all GPUs, and it outperforms its nearest rivals, such as the AMD Radeon RX 6850M XT, by a margin of 1.1%. For Inside, the GPU's role is not to struggle with graphical fidelity, but to render frames with such speed that the CPU becomes the only potential limiting factor. The data shows that this is rarely an issue.

The memory configuration is overkill for this game. The 32 GB frame buffer is intended for 8K textures or heavy ray tracing workloads, neither of which are present in Inside. However, this oversizing means that the GPU will never be forced to swap textures or deal with memory pressure, ensuring that frame times remain consistent and stutter-free. The pixel rate of 423.6 GPixel/s and texture rate of 1,636.8 GTexel/s are the specifications that allow the card to fill the screen with the game's monochromatic, atmospheric art style at extremely high speeds.

FAQ

Q: Is the AMD Ryzen 5 5500X3D powerful enough for the RTX 5090 in this game?

A: Yes. The benchmark results show that this combo achieves a rank of 744 out of 2887, and the CPU's average benchmark score of 37018 places it in the 85th percentile. The data indicates that the CPU does not bottleneck the GPU in Inside, as frame rates remain exceptionally high across all settings.

Q: How much faster is the RTX 5090 than its nearest rival in terms of average benchmark score?

A: The RTX 5090 has an average benchmark score of 79842, which is 1.1% higher than the AMD Radeon RX 6850M XT (with a score of 78940). It also leads the NVIDIA Tesla P100 PCIe 16 GB by 0.3%.

Q: What is the difference in average FPS between Low and Ultra settings at 1920x1080?

A: At 1920x1080, the average FPS at Low settings is 268, while at Ultra settings it drops to 203. This represents a 65 FPS difference, showing that even at the highest settings, the frame rate remains comfortably above 200 FPS.

Q: Does the RTX 5090's 32 GB of VRAM provide any benefit in this game?

A: Practically, no. Inside is not a VRAM-intensive title. The 32 GB of GDDR7 memory ensures that the GPU will never run out of memory, but the data shows that even the minimum FPS at 4K Medium settings is 161, indicating that memory capacity is not a limiting factor at all.

Q: How does the combo's rank of 744 compare to the total number of tested combinations?

A: The rank of 744 out of 2887 total combos places this configuration in the top 25.8% of all tested pairings. This is a strong result, but it also shows that there are many other configurations that can achieve similar levels of performance in this specific game.

Q: Is the RTX 5090's performance consistent with its nearest rivals?

A: The data shows a tight grouping. The RTX 5090's score of 79842 is only 0.3% higher than the NVIDIA Tesla P100 PCIe 16 GB and 0.6% higher than the Tesla P100 PCIe 12 GB. The largest delta is 1.4% against the AMD Radeon Pro Vega 64X.

Measured FPS Breakdown

The measured FPS data for this combo shows a clear and predictable scaling across resolutions and settings. At 1920x1080, the average frame rates are extraordinarily high. With Low settings, the combo achieves 268 FPS, which is the highest of any tested configuration. Moving to Medium settings, the average drops slightly to 247 FPS, with a minimum of 210 FPS and a maximum of 285 FPS. High settings yield 206 FPS, and Ultra settings still produce an average of 203 FPS. The differences between settings at 1080p are relatively small, indicating that the GPU is not being fully stressed.

At 2560x1440, the performance remains exceptionally strong. The Low setting average is 240 FPS, which is a slight drop from 1080p. Medium settings see an average of 222 FPS, with a minimum of 188 FPS and a maximum of 255 FPS. High settings produce 185 FPS, and Ultra settings deliver 182 FPS. The data shows that even at 1440p, the RTX 5090 is still capable of exceeding the refresh rates of most high-end monitors.

The 4K results are where the combo begins to show its limits, though "limits" is a relative term here. At 3840x2160, the Low setting average is 206 FPS. Medium settings drop to 190 FPS, with a minimum of 161 FPS and a maximum of 218 FPS. High settings yield 150 FPS, and Ultra settings drop to 143 FPS. Even at 4K Ultra, the average frame rate remains above 140 FPS, which is far beyond the requirements for smooth gameplay in a puzzle platformer. The minimum FPS recorded in the entire dataset is 161 FPS, which occurred at 4K Medium settings, indicating that there are no performance dips that would cause noticeable stutter.

CPU Role

The AMD Ryzen 5 5500X3D is a 6-core, 12-thread processor based on the Zen 3 architecture, codenamed Vermeer. It operates at a base clock of 3.00 GHz and a boost clock of 4.00 GHz. For a game like Inside, the CPU's role is primarily to maintain a stable frame delivery and handle the game's logic. The benchmark data shows that this processor is more than capable of this task. Its Passmark single-thread score of 2941 and multithread score of 20363 are solid figures that place it in the 85th percentile of all CPUs.

The CPU's large 96 MB of shared L3 cache is a significant asset. While Inside may not heavily rely on cache, the data suggests that the processor's memory access patterns are efficient enough to not create a bottleneck for the RTX 5090. The nearest rival, the AMD Ryzen 5 5600F, has an average score of 36945, which is just 0.2% lower than this chip. This indicates that the 5500X3D is performing exactly as expected for its class.

In this specific game, the CPU's performance is more than sufficient to feed the GPU with frames. The fact that the combo ranks 744th out of 2887 suggests that the limiting factor is not the CPU's processing power, but rather the game's engine or the GPU's own rendering speed. The CPU's 105W TDP and DDR4 memory support are standard for its generation, and its performance in the Passmark physics test (score of 2282) confirms that it can handle the simple physics calculations required by a puzzle platformer without breaking a sweat.

Settings Recommendations

Based on the measured FPS data, the best experience is achieved by maximizing visual fidelity while maintaining a high frame rate. At 1920x1080, the difference between High and Ultra settings is only 3 FPS (206 vs 203). Therefore, enabling Ultra settings at 1080p is the clear choice, as there is no meaningful performance penalty for the highest visual quality. The same logic applies to 2560x1440, where the difference between High and Ultra is also minimal (185 vs 182 FPS).

At 3840x2160, the choice becomes slightly more nuanced. The High setting delivers 150 FPS, while Ultra drops to 143 FPS. For a game like Inside, which has a distinct art style, the visual difference between High and Ultra may not be significant. However, the 7 FPS difference is negligible in gameplay terms. The data suggests that playing at 4K Ultra is entirely viable, as the average frame rate remains well above 144 FPS.

Considering the game's genre, the recommendation is to prioritize resolution and settings. The combo has enough headroom to run at 4K Ultra with an average of 143 FPS. For players with high-refresh-rate 1440p monitors, the Ultra setting at 2560x1440 will provide an average of 182 FPS, which is more than enough to saturate a 165Hz display. The Low and Medium settings are unnecessary for this hardware, as they sacrifice visual quality for frame rates that far exceed what is perceptible or useful. The optimal choice is to use Ultra settings at your native resolution, as the hardware has ample performance to spare in this title.