Hitman 2
This combination offers playable performance with an average of 46 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 15 | 20 | 26 | 35 |
| 1440p QHD | 27 | 37 | 49 | 65 |
| 1080p Full HD | 43 | 58 | 77 | 102 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Hitman 2 with Intel Core i7-14700F + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis
Hitman 2 on this Intel Core i7-14700F with an NVIDIA GeForce RTX 3050 4 GB is a strictly entry-level experience, with the data showing a combination that sits near the bottom of the database. Across all measured settings the system never reaches a smooth 60 FPS at 4K, and even at 1440p it only achieves that standard on Low. The CPU is unquestionably powerful — the i7-14700F ranks in the 91st percentile of all CPUs in the database — but the RTX 3050 4 GB, with its modest VRAM and bandwidth, is the clear limiting component. The result is a combo that will play the game, but only at reduced settings and lower resolutions. This analysis breaks down exactly how the measured FPS behaves across resolutions and settings, explains what those numbers mean, and identifies the hardware bottleneck.
Resolution Scaling
The data shows a sharp, predictable FPS drop as resolution rises, and it points to a GPU-bound scenario. At 1080p High, the system averages 58 FPS. Move to 1440p High and it falls to 37 FPS, a reduction of 21 FPS (about 36%). At 4K High, FPS plummets to 20 — barely more than a slideshow. That is a 65% loss from 1080p High to 4K High. The same pattern holds across all presets. At Low is even more extreme: 102 FPS at 1080p, 65 FPS at 1440p (−37 FPS), and 35 FPS at 4K (−67%). Medium averages 77 at 1080p, 49 at 1440p, and 26 at 4K. Ultra is the heaviest: 43 at 1080p, 27 at 1440p, and only 15 at 4K. It’s not a linear drop — the scaling is aggressive, especially between 1440p and 4K, where the pixel load quadruples. This is the signature of a GPU that is rapidly running out of pixel-pushing capacity. The RTX 3050 4 GB, while a modern Ampere chip, simply does not have the shading units, memory bandwidth, or VRAM to carry an 8.3 million pixel load. The CPU, far more capable than needed, is not the limiting factor here.
The contrast between 4K and 1080p at the same preset highlights the GPU wall. At Low, 1080p yields 102 FPS, but 4K plummets to 35 FPS. That’s a 34% of the 1080p score. At Ultra, the drop is even more lopsided: 4K pulls only 15 FPS vs 43 at 1080p — 35%. The steady shrinkage of the FPS gap as settings rise tells us exactly which component is doing the heavy lifting. When the load is small (1080p Low), the CPU is enough to assist, but as pixel count and shading increase, the GPU must do all the work — and it fails. The trend is monotonic: every resolution jump costs a large chunk of performance, and the smallest jump (1080p to 1440p) is less punishing than the biggest (1440p to 4K). This confirms the GPU is the resource bottleneck. The i7-14700F has 20 cores and 28 threads, but in Hitman 2 the GPU is trading at a massive deficit.
Settings Recommendations
The measured data suggests that for a playable experience, the user must compromise on both resolution and quality. At 1080p, the Low preset yields 102 FPS, which is comfortably above the 60 FPS threshold for smooth play. Medium comes in at 77 FPS, still acceptable. High runs at 58 FPS, which is playable but falls short of ideal smoothness. Ultra drops to 43 FPS, so it’s borderline. For a standard 1080p monitor, the best trade-off is the Medium preset: it delivers 77 FPS, a substantial improvement over High (58 FPS) and still above Low’s performance, while the visual quality is closer to Ultra than to Low. It’s clear that High is the midpoint, and dropping from High to Low yields a huge 44 FPS jump (from 58 to 102), but at the cost of heavy visual downgrade. Therefore, Medium is the balanced choice for 1080p.
At 1440p, no preset reaches 60 FPS. Low gives 65 FPS, which is above 60, but only barely; it’s stable enough. Medium drops to 49 FPS, which is noticeably inferior. High 37 FPS and Ultra 27 FPS are unplayable for a stealth action. So at 1440p, the only remotely playable option is Low with its 65 FPS. It still requires sacrificing shadows and texture quality. At 4K, even Low only reaches 35 FPS, which is far below playability. No settings at 4K are recommended; the combo cannot achieve a minimum of 30 FPS at any setting, and the low-end only hits 35, with Ultra at 15. So the data suggests that if the user owns a 4K monitor, they should either lower to 1440p or 1080p or upgrade the GPU. In summary, 1080p Medium provides the best balance between smoothness and fidelity for this hardware.
How This Combo Ranks
Among the 3,711 tested combos in the database, this particular pairing of Intel Core i7-14700F + RTX 3050 4 GB ranks 3,261. That places it in the 12th percentile — meaning roughly 88% of all combos deliver better performance. Such a low ranking is consistent with a GPU that has only 4 GB of VRAM and produces a per-second pixel rate of just 55.68 GPixel/s. The CPU, however, is a high performer; it sits at the 91st CPU percentile in the whole site. Yet the composite performance is dragged down by the graphics card. The ranking tells a story of an unbalanced combination: a mid-range GPU and an upper-end CPU. The i7-14700F’s 20 cores and 28 threads are far more than this title needs, and the game's work is delegated to the GPU.
To put the CPU in context, its nearest rivals in the general benchmark table include the Intel Xeon 6505P, which scores a delta of −0.2% (basically identical), and the AMD Ryzen 9 7900X at +0.6% — meanwhile a Xeon Phi 7290 is just 0.3% slower and an EPYC 7313P is 0.8% slower. These are all server-grade processors, meaning the i7-14700F is in elite company by CPU performance. But in Hitman 2, the measured FPS numbers are far below what this CPU could achieve if paired with better hardware. The 12th percentile rank is a consequence of the GPU, not the CPU. The nearest rival data in the CPU realm doesn't correspond to game performance, but it demonstrates that the CPU is not the weak link.
The measured FPS numbers align with this ranking: at 1080p Low, the system hits 102 FPS, which is good, but that’s one of the highest settings. At 4K High, only 20 FPS. Those are the kind of numbers that put this combo near the bottom of a 3,711 list. The ranking is consistent with the scaling results: the GPU is holding the CPU back.
Measured FPS Breakdown
The measured FPS across all realistic preset/resolution combinations is as follows:
At 1080p (1920x1080), the system averages:
- Low: 102 avg FPS (no min/max recorded)
- Medium: 77 avg FPS, with a min of 65 and a max of 88
- High: 58 avg FPS
- Ultra: 43 avg FPS
The Medium preset has the only documented min and max in this resolution, giving a range of 65 to 88 FPS. That sub-range shows that even at Medium, the frame rate varies widely, likely due to scene complexity. At High, the 58 FPS is a stable-ish number, but it stays above 30. At Ultra, the 43 FPS is the absolute peak at 1080p, and it is crystal clear that Ultra is not smooth.
At 1440p (2560x1440):
- Low: 65 avg FPS
- Medium: 49 avg FPS, min 42, max 56
- High: 37 avg FPS
- Ultra: 27 avg FPS
The Medium range of 42–56 is notable: it dips below 45, which is the effective winter. At Low, 65 FPS is playable but just above 60; at 60 exactly. But 37 and 27 are far below.
At 4K (3840x2160):
- Low: 35 avg FPS
- Medium: 26 avg, min 22, max 30
- High: 20 avg
- Ultra: 15 avg
The 4K Medium range of 22–30 shows that the card is constantly borderline on the FPS floor. The Low setting at 4K is the only one that hits above 30 FPS, and it’s at 35.
These numbers are the only measured values, and there are no missing cells except for min/max at some presets. The pattern is uniform: as the resolution doubles, average FPS roughly halves (except for some anomalies). For example, 1080p Low (102) → 1440p Low (65) → 4K Low (35) — each step is a nearly 35–40% decline. This linear halving points directly to GPU pixel throughput. The RTX 3050’s 32 ROPs and 128-bit memory bus with 192.0 GB/s bandwidth, both spec figures from the pack, are lower than typical for a card in this class, and they cannot keep up with high pixel counts.
GPU Role
The GPU is the undeniable performance limiter in this pair. The facts: 4 GB of GDDR6 memory on a 128-bit bus, yielding 192.0 GB/s of bandwidth. The card has 2,048 shading units, 64 TMUs, 32 ROPs, and clocks that boost to 1740 MHz. But the numbers that matter for Hitman 2 are the VRAM size and bandwidth. At 4K, the frame buffer demand exceeds the card’s memory capacity easily. The game’s textures and assets, even at Medium, likely exceed 4 GB, causing buffer swapping and performance collapses. At 1080p Low, the frame rates (102) show that at low settings the GPU can still deliver strong performance. But as settings and resolution rise, the 4 GB limit, and the limited bandwidth (192 GB/s is only the effective speed) becomes a brick wall.
The card’s transistor count is 8.7 billion on an 8nm Samsung process, and its texture rate is 111.4 GTexel/s, but these are not enough. The measured FPS at 4K High (20 FPS) and Ultra (15) show the GPU is overwhelmed. The percentiles in the database: this GPU is at the 50th percentile of all GPUs, which is 50%, but its avgBenchmarkScore is zero, meaning there is no benchmark data for it alone. Relative to the CPU's 91st percentile, the GPU is exactly average hardware, but the combination makes it poor in a game that can be heavy on graphics. The RTX 3050, even at its boost of 1.74 GHz, cannot produce sufficient FPS in Hitman 2 at high resolutions. The fact that at 1080p Medium it averages 77 FPS, but at 4K Medium it drops to 26, shows a 2.9x degradation. This further confirms that the GPU is the component that pins the system down.
CPU Role
The Intel Core i7-14700F is an objectively strong processor, and it is far too powerful for this GPU pairing. Its specifications: 20 cores, 28 threads, base 2.10 GHz, boost 5.40 GHz, and 33 MB of L3 cache on the Raptor Lake architecture. In Cinebench R23, it scores 35,122 multicore and 4,958 single-core. In Geekbench, it reaches 19,620 multicore and 2,429 single-core. Its PassMark multithread score is 41,317, and single-thread is 4,257. These numbers place the CPU in the 91st percentile of all CPUs, and its nearest rivals are all server chips: the Xeon 6505P, Xeon Phi 7290, Ryzen 9 7900X, and EPYC 7313P. The delta percentages are all under 1%, meaning it matches these high-end chips in raw compute.
But in Hitman 2, this CPU is never the limiting factor. The game is single-threaded, but the i7-14700F’s single-core throughput is excellent. At 1080p Low, the system yields 102 FPS, a frame rate that could be higher if the GPU handled more. At all resolutions, the CPU is feeding the GPU with more data than the GPU can process. The Measured FPS never reaches the CPU’s own speed limits; if we assume a typical game would run at 200+ FPS, the GPU won't allow it. Therefore, the CPU’s role is overkill: at every measured setting, the GPU is the limiting resource. A weaker CPU would not change the outcome; the FPS would be identical because the GPU is doing all the work. The 28 threads and high boost clock are redundant for this title. The only real CPU limit is Hitman 2's engine, which doesn't use more than a handful of cores. The i7-14700F would be considered a CPU that enables high FPS if paired with a better GPU, but here its potential is unrealized.
In addition, the CPU has a TDP of 65W and is an efficient part, but it does not generate or limit the game. The FPS data, with the tight min/max on medium, shows that the CPU's thread management is not causing drops. The MIN/MAX range on 1440p Medium is 42–56, which is a 14 FPS variance — consistent with GPU driver, not CPU. The chip does not come under thermal throttling. Thus the CPU is sidelined; the RTX 3050 is the sole reason this combo is at the bottom of the rank.
In summary, the Core i7-14700F is a top-tier CPU that belongs in a combination with a more capable GPU. Its benchmark numbers are excellent and place it among servers, but in Hitman 2 it is playing second violin to a graphics card that cannot deliver. The measured FPS numbers, the scalinis, and the combo’s rank all confirm that the GPU is the next step to getting a playable experience at higher resolutions. The user would benefit from upgrading the GPU rather than the CPU.
Hardware Specifications
Intel Core i7-14700F
NVIDIA GeForce RTX 3050 4 GB
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-14700F + NVIDIA GeForce RTX 3050 4 GB in Hitman 2
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 35.0 |
| 3840x2160 | Medium | 26.0 |
| 3840x2160 | High | 20.0 |
| 3840x2160 | Ultra | 15.0 |
| 2560x1440 | Low | 65.0 |
| 2560x1440 | Medium | 49.0 |
| 2560x1440 | High | 37.0 |
| 2560x1440 | Ultra | 27.0 |
| 1920x1080 | Low | 102.0 |
| 1920x1080 | Medium | 77.0 |
| 1920x1080 | High | 58.0 |
| 1920x1080 | Ultra | 43.0 |
Hitman 2 with RTX 3050 4 GB + Other CPUs
See how Hitman 2 performs with the same GPU but different processors.
Other Games with ii7-14700F + RTX 3050 4 GB
Explore FPS benchmarks for other games using this same hardware combination.