Barony
This combination provides smooth gameplay with an average of 94 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 30 | 46 | 52 | 64 |
| 1440p QHD | 57 | 83 | 94 | 129 |
| 1080p Full HD | 92 | 132 | 149 | 202 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with Intel Core i7-14700F + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The measured FPS data for Barony reveals a dramatic scaling pattern as resolution climbs from 1920x1080 to 3840x2160. At High settings, the average frame rate drops from 131.9 FPS at 1080p to 83.2 FPS at 1440p, then falls further to 45.5 FPS at 4K. That represents a 65.5% reduction in frame rate from 1080p to 4K, which is a substantial penalty that points squarely at the GPU as the primary bottleneck in this configuration.
The scaling behavior is even more telling when examining the Low preset. At 1080p Low, the system produces 201.9 FPS, which drops to 129.3 FPS at 1440p and 64.3 FPS at 4K. The fact that even the lowest settings cannot maintain high frame rates at 4K—dropping below 65 FPS—indicates that the NVIDIA GeForce RTX 3050 4 GB is being pushed to its limits at higher resolutions, regardless of how much graphical load is removed.
Interestingly, the gap between Low and Ultra settings widens considerably as resolution increases. At 1080p, the spread between Low (201.9 FPS) and Ultra (91.8 FPS) is 110.1 FPS. At 4K, that spread narrows to just 34.1 FPS (64.3 FPS Low versus 30.2 FPS Ultra). This compression of the settings range at higher resolutions is a classic sign that the GPU's raw throughput—its 7.127 TFLOPS of FP32 compute and 192.0 GB/s memory bandwidth—becomes the limiting factor, rather than the specific visual features being toggled.
The data suggests that for 4K gameplay, users are essentially choosing between 30 FPS (Ultra) and 64 FPS (Low), with Medium and High landing at 51.8 and 45.5 FPS respectively. None of these options reach the 60 FPS threshold at 4K except Low, and even that barely clears it. This is consistent with a GPU that has only 4 GB of GDDR6 memory on a 128-bit bus—a configuration that struggles with the memory pressure of 4K rendering.
At 1440p, the picture improves considerably. Low settings deliver 129.3 FPS, Medium achieves 93.8 FPS, and High reaches 83.2 FPS. Ultra drops to 57.1 FPS, which is playable but below the 60 FPS mark. The 1440p results show a much healthier balance between CPU and GPU load, suggesting that this resolution is where the Intel Core i7-14700F's substantial compute resources—20 cores and 28 threads—can actually stretch their legs without being starved by the GPU.
FAQ
Q: Can this combo run Barony at 60 FPS in 4K Ultra settings?
A: No. The measured average FPS at 3840x2160 Ultra is 30.2 FPS, which is well below the 60 FPS target. Even lowering to High settings only yields 45.5 FPS at 4K.
Q: What is the best resolution for maximizing frame rate with this hardware?
A: The data shows 1920x1080 delivers the highest frame rates across all settings, with Low hitting 201.9 FPS, Medium at 148.8 FPS, High at 131.9 FPS, and Ultra at 91.8 FPS. This resolution fully utilizes the CPU's potential without GPU bottlenecks.
Q: How does the RTX 3050 4 GB perform relative to other GPUs in the benchmark database?
A: The GPU sits at the 50th percentile among all GPUs, placing it exactly in the middle of the performance distribution. Its average benchmark score is listed as 0, though this appears to reflect missing benchmark data rather than actual performance metrics.
Q: Is the Core i7-14700F a strong CPU for this game?
A: Yes. The CPU ranks in the 94th percentile among all CPUs, with an average benchmark score of 54097. Its nearest rival, the AMD Ryzen 9 9900X, scores 54450, which is only 0.6% higher, indicating the 14700F is competitive at the top tier.
Q: What frame rate can I expect at 1440p with Medium settings?
A: The measured average FPS for 2560x1440 Medium is 93.8 FPS. This is a comfortable frame rate for most displays and represents a good balance between visual quality and performance.
Q: Does the 4 GB VRAM limit performance at any resolution?
A: The data shows 4K Ultra only achieves 30.2 FPS, and even 4K Low is 64.3 FPS. The 4 GB GDDR6 memory with 192.0 GB/s bandwidth appears insufficient for smooth 4K gameplay, as frame rates remain below 65 FPS across all settings at this resolution.
How This Combo Ranks
The combination of the Intel Core i7-14700F with the NVIDIA GeForce RTX 3050 4 GB ranks 1550 out of 1702 tested combos in Barony. This places it in the lower 9% of all configurations tested for this game. The ranking is notably poor given how capable the CPU is on its own—the 14700F sits at the 94th percentile among all CPUs. This discrepancy highlights a significant imbalance: the processor is far more powerful than what the GPU can utilize in this title.
The combo ranking suggests that Barony's performance is heavily GPU-bound with this pairing. While the CPU can push well over 200 FPS at 1080p Low (201.9 FPS), the GPU's limitations cap overall performance at lower levels than the CPU could theoretically support. In fact, the CPU's benchmark scores—such as 35443 in Cinebench R23 multi-core and 16571 in Geekbench multi-core—indicate it could handle much higher frame rates if paired with a stronger graphics card.
That said, the ranking of 1550 out of 1702 should be interpreted with caution. Barony is a roguelike game, which may not stress the CPU as heavily as other genres. The fact that the combo ranks so low despite having a top-tier CPU suggests that either the game's engine is not heavily multithreaded, or that the GPU is the dominant factor in determining frame rates. The 4 GB VRAM on the RTX 3050 is likely a contributing factor, as modern games at high resolutions can exceed this memory capacity, causing performance degradation.
Measured FPS Breakdown
At 1920x1080, the full range of settings shows this combo's potential. Low settings produce 201.9 FPS average, Medium reaches 148.8 FPS, High achieves 131.9 FPS, and Ultra drops to 91.8 FPS. The progression from Low to Ultra shows a steady decline, with the largest single step being from Medium to High (a 16.9 FPS drop) and from High to Ultra (a 40.1 FPS drop). The Ultra preset at 91.8 FPS remains playable, but the jump from High to Ultra costs over 30% of the frame rate.
Moving to 2560x1440, the frame rates drop noticeably across all settings. Low delivers 129.3 FPS, Medium reaches 93.8 FPS, High achieves 83.2 FPS, and Ultra falls to 57.1 FPS. The 1440p results show that only Low and Medium maintain frame rates above 90 FPS, while Ultra falls below the 60 FPS threshold. The scaling from 1080p to 1440p at each setting shows a reduction of approximately 36-38% across Low, Medium, and High, while Ultra sees a 37.8% reduction.
At 3840x2160, the performance picture becomes challenging. Low settings yield 64.3 FPS, Medium achieves 51.8 FPS, High drops to 45.5 FPS, and Ultra falls to 30.2 FPS. The 4K results are uniformly below 65 FPS, with only Low settings barely exceeding the 60 FPS mark. The scaling from 1440p to 4K is severe: Low drops by 50.3%, Medium by 44.8%, High by 45.3%, and Ultra by 47.1%. These steep penalties indicate the GPU's memory bandwidth of 192.0 GB/s is a limiting factor at 4K resolutions.
Notably, the min and max FPS values are not provided in the data, so the analysis relies solely on average frame rates. This means the data does not capture potential frame time spikes or stuttering that might occur with only 4 GB of VRAM when textures exceed memory capacity.
CPU Role
The Intel Core i7-14700F is a 20-core, 28-thread processor based on the Raptor Lake architecture, built on Intel's 10 nm process. Its base clock is 2.10 GHz with a boost clock of 5.40 GHz, and it carries 33 MB of shared L3 cache. The CPU's benchmark results are impressive: a Cinebench R23 multi-core score of 35443 and single-core score of 5003, a Geekbench multi-core score of 16571, and a Passmark single-thread score of 4261.
In the context of Barony, the CPU's role appears to be largely supportive rather than performance-limiting. At 1080p Low, the combo achieves 201.9 FPS, which suggests the CPU can feed the GPU with enough data to reach very high frame rates. However, the fact that the combo ranks 1550 out of 1702 indicates that the CPU's power is not being fully leveraged in this game. Barony is a roguelike, a genre that typically does not require extensive physics simulations or large numbers of AI agents—workloads that would benefit from the 14700F's 20 cores and 28 threads.
The CPU's 94th percentile ranking among all CPUs, with an average benchmark score of 54097, places it just 0.6% behind the AMD Ryzen 9 9900X (54450) and 1.1% behind the Ryzen 9 9900X3D (54681). This shows the 14700F is competitive with top-tier processors, yet the measured FPS in Barony at 4K Ultra (30.2 FPS) suggests the game's performance ceiling is dictated by the GPU, not the CPU.
The single-core performance of the 14700F—evidenced by the 5003 Cinebench R23 single-core score and 4261 Passmark single-thread score—is likely sufficient for Barony's game logic. The CPU's boost clock of 5.40 GHz provides strong single-threaded performance, which is often more important for roguelike games that may have serial game state updates.
Settings Recommendations
Based on the measured FPS data, the optimal settings depend heavily on the target resolution and frame rate preference. For 1080p, all settings are playable, with Ultra still achieving 91.8 FPS. This makes 1080p Ultra the best choice for users with 1080p displays who want maximum visual quality without sacrificing smoothness. The 91.8 FPS average at Ultra is well above the 60 FPS threshold and provides headroom for demanding scenes.
At 1440p, the recommendation shifts to Medium settings, which deliver 93.8 FPS. High settings at 83.2 FPS are also viable, but Medium offers a better balance between visual fidelity and frame rate stability. Ultra at 1440p drops to 57.1 FPS, which is below the 60 FPS threshold and may result in noticeable stuttering on 144Hz displays. For competitive play, Low settings at 1440p provide 129.3 FPS, which is ideal for high refresh rate monitors.
For 4K, the data shows that only Low settings (64.3 FPS) come close to maintaining 60 FPS. Medium (51.8 FPS) and High (45.5 FPS) are playable but will feel less smooth, while Ultra (30.2 FPS) is only suitable for turn-based or slow-paced gameplay. Given that Barony is a roguelike where reaction time may be less critical, 4K Medium at 51.8 FPS could be acceptable for many players, but 4K Low is the safest recommendation for a consistent experience.
The single best overall preset appears to be 1080p High at 131.9 FPS, which offers a good balance of visual quality and performance with enough headroom for any scene complexity. For users prioritizing frame rate over visuals, 1080p Low at 201.9 FPS is the clear winner.
GPU Role
The NVIDIA GeForce RTX 3050 4 GB is built on the Ampere architecture with the GA107 chip, manufactured on Samsung's 8 nm process. It features 2048 shading units, 64 texture mapping units, 32 ROPs, 16 ray tracing cores, and 64 tensor cores. The GPU operates at a base clock of 1545 MHz with a boost clock of 1740 MHz, and its 4 GB of GDDR6 memory runs at 1500 MHz with a 12 Gbps effective data rate across a 128-bit bus, yielding 192.0 GB/s of bandwidth.
The GPU's role in Barony is clearly the dominant factor in determining frame rates, particularly at higher resolutions. The 4 GB VRAM capacity is likely a significant limitation at 4K, where high-resolution textures can easily exceed this amount. The fact that 4K Low (64.3 FPS) is only 25% faster than 4K Ultra (30.2 FPS) suggests that the GPU is not just bandwidth-limited but also compute-limited at this resolution.
The RTX 3050 4 GB sits at the 50th percentile among all GPUs, placing it exactly in the middle of the performance distribution. Its FP32 compute of 7.127 TFLOPS and texture rate of 111.4 GTexel/s are modest figures, and the 192.0 GB/s memory bandwidth is a notable bottleneck for 4K rendering. The pixel rate of 55.68 GPixel/s means the GPU can fill 55.68 million pixels per second, which at 4K (8.3 million pixels) theoretically allows for about 6.7 full-screen passes per frame—a tight budget for complex shaders.
The GPU's TDP of 90 W and the suggested 250 W PSU indicate this is a power-efficient card, but efficiency does not compensate for raw performance limits. The 8,700 million transistors on a 200 mm² die show a dense design, yet the 4 GB memory capacity remains the most critical constraint for modern games at high resolutions. For Barony specifically, the GPU's limitations are most apparent at 4K, where even the lowest settings cannot reliably maintain 60 FPS.
Hardware Specifications
Intel Core i7-14700F
NVIDIA GeForce RTX 3050 4 GB
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-14700F + NVIDIA GeForce RTX 3050 4 GB in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 64.3 |
| 3840x2160 | Medium | 51.8 |
| 3840x2160 | High | 45.5 |
| 3840x2160 | Ultra | 30.2 |
| 2560x1440 | Low | 129.3 |
| 2560x1440 | Medium | 93.8 |
| 2560x1440 | High | 83.2 |
| 2560x1440 | Ultra | 57.1 |
| 1920x1080 | Low | 201.9 |
| 1920x1080 | Medium | 148.8 |
| 1920x1080 | High | 131.9 |
| 1920x1080 | Ultra | 91.8 |
Barony with RTX 3050 4 GB + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with ii7-14700F + RTX 3050 4 GB
Explore FPS benchmarks for other games using this same hardware combination.