Hard West
This combination provides smooth gameplay with an average of 75 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 23 | 32 | 41 | 50 |
| 1440p QHD | 50 | 62 | 80 | 99 |
| 1080p Full HD | 76 | 99 | 129 | 157 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Hard West with Intel Core i5-10400F + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis
The Intel Core i5-10400F paired with the NVIDIA GeForce RTX 3060 Ti delivers a fascinating performance curve in Hard West, a turn-based tactics title that is far more demanding on the GPU than its genre might suggest. The measured frame rates across three resolutions and four quality presets reveal a component pairing that scales predictably, with the RTX 3060 Ti serving as the primary bottleneck at higher resolutions while the i5-10400F keeps pace admirably at 1080p. This analysis breaks down the raw data to show exactly where this combo excels and where it struggles.
Resolution Scaling
The data shows a clear and consistent pattern: frame rates drop sharply as resolution increases, confirming that the RTX 3060 Ti is the limiting factor in this configuration. At 1080p with High settings, the combo produces 99.4 FPS, but moving to 1440p High yields 62 FPS, a 37.6% reduction. The jump to 4K High is even more punishing, with average FPS falling to 31.9, which is roughly half of the 1440p result and about a third of the 1080p score. This steep decline indicates that the GPU’s pixel throughput is the dominant constraint, not the CPU.
The pattern holds across all settings. At Low quality, the system achieves 156.5 FPS at 1080p, 99.4 FPS at 1440p, and 49.5 FPS at 4K. The scaling from 1080p to 1440p at Low is a 36.5% drop, while 1440p to 4K is a 50.2% drop. This non-linear degradation suggests that 4K resolution pushes the RTX 3060 Ti well beyond its comfortable operating range, even at the lowest settings. The gap between 1080p and 1440p is consistent, but the 4K cliff is steeper, highlighting the memory bandwidth and shading unit limits of this GPU.
Ultra settings tell the most dramatic story. At 1080p Ultra, the combo manages 76 FPS, which is playable but not spectacular. At 1440p Ultra, it drops to 49.9 FPS, and at 4K Ultra, it collapses to 22.6 FPS, which is below the threshold for smooth gameplay. The delta between High and Ultra at 4K is particularly telling: 31.9 FPS versus 22.6 FPS, a 29.2% performance penalty for the highest preset. This suggests that Ultra settings introduce effects that disproportionately tax the GPU’s 8 GB of GDDR6 memory and 4864 shading units.
The CPU’s role in this scaling is minimal. The i5-10400F, with its 6 cores and 12 threads, provides ample headroom for a turn-based tactics game that does not rely on real-time physics or complex AI simulations. The benchmark results indicate that the processor’s 3DMark scores—4748 for 16 threads and 4735 for max threads—are sufficient to feed the GPU at every resolution tested. The bottleneck is unequivocally the graphics card, as evidenced by the consistent frame rate drops that track resolution increases.
Settings Recommendations
Based on the measured rows, the optimal experience for this combo is found at 1440p with High settings, delivering 62 FPS. This strikes the best balance between visual quality and fluidity, as it maintains a frame rate above the 60 FPS threshold while offering the High preset’s enhanced textures and lighting. The 1440p Medium setting is a close second at 80.2 FPS, which provides a smoother experience but sacrifices some visual fidelity. For players who prioritize frame rate above all else, 1080p Low at 156.5 FPS is the clear choice, though the visual downgrade is substantial.
At 1080p, the High preset at 99.4 FPS is the recommended starting point. It outperforms Medium (129.1 FPS) and Low (156.5 FPS) in visual quality while remaining well above the 60 FPS threshold. The Ultra preset at 1080p, at 76 FPS, is viable but offers diminishing returns over High, given the 23.4 FPS loss. The data suggests that High is the sweet spot for this resolution, as it delivers nearly double the frame rate of 4K High while retaining most of the visual benefits.
For 4K, the situation is more constrained. The only playable option is Low, which yields 49.5 FPS, but this is below the ideal 60 FPS target. Medium at 4K drops to 41 FPS, and High falls to 31.9 FPS, both of which are borderline for a turn-based game where smooth camera pans and animations matter. Ultra at 4K is effectively unplayable at 22.6 FPS. Given these numbers, 4K gaming on this combo requires significant compromises, and the recommendation is to stick with 1440p High for the best overall experience.
The measured data also shows that the jump from High to Ultra provides minimal benefit across all resolutions. At 1440p, the difference is 62 FPS versus 49.9 FPS, a 19.5% penalty for Ultra. At 1080p, it is 99.4 FPS versus 76 FPS, a 23.5% penalty. This consistent overhead indicates that Ultra settings introduce effects that are not visually proportional to their performance cost, making High the pragmatic choice for this hardware pairing.
GPU Role
The NVIDIA GeForce RTX 3060 Ti is the workhorse of this configuration, and its specifications directly explain the measured results. The GPU features 8 GB of GDDR6 memory on a 256-bit bus, providing 448.0 GB/s of bandwidth. This memory configuration is sufficient for 1080p and 1440p gaming, but the 4K results suggest that capacity and bandwidth become limiting factors at higher resolutions. The 4K High result of 31.9 FPS, compared to 62 FPS at 1440p High, indicates that the GPU’s pixel fill rate and memory subsystem are overwhelmed by the 8.3 million pixel workload.
The clock speeds play a critical role in the performance scaling. The base clock of 1410 MHz and boost clock of 1665 MHz, combined with 4864 shading units, deliver 16.20 TFLOPS of FP32 compute. This raw power is evident in the 1080p results, where the GPU easily exceeds 100 FPS at Medium settings and reaches 156.5 FPS at Low. However, the 4K results reveal that compute throughput is not the only factor; the 133.2 GPixel/s pixel rate and 253.1 GTexel/s texture rate are insufficient for 4K Ultra, which requires massive pixel and texture throughput.
The GPU’s 80 ROPs and 152 TMUs are also relevant to the frame rate drops. At 4K, the ROP count becomes a bottleneck, limiting the number of pixels that can be written to the frame buffer each second. This is reflected in the steep drop from 1440p High (62 FPS) to 4K High (31.9 FPS), a 48.5% reduction that cannot be attributed to CPU limitations. The i5-10400F’s performance in Cinebench R23 multicore (10297 points) and single-core (1453 points) benchmarks confirms that the processor is not the constraint.
The GPU’s position relative to its rivals underscores its mid-range status. The RTX 3060 Ti has an average benchmark score of 25120, placing it just 0.2% below the AMD Radeon RX 6700M and 0.5% below the AMD Radeon RX 6600. This tight grouping explains why the GPU performs as expected in Hard West: it is competitive with its peers but does not offer the headroom needed for 4K Ultra. The GPU’s 69th percentile ranking among all GPUs further confirms that it is a solid mid-range option, not a high-end solution.
FAQ
*Q: Can this combo achieve 60 FPS at 4K in Hard West?*
A: No. The best 4K result is 49.5 FPS at Low settings, which falls short of the 60 FPS target. Medium and High settings produce 41 FPS and 31.9 FPS, respectively, while Ultra drops to 22.6 FPS.
Q: What is the highest playable setting at 1440p?
A: High settings deliver 62 FPS, which is the highest preset that maintains a 60+ FPS average. Ultra at 1440p drops to 49.9 FPS, which is not ideal for smooth gameplay.
Q: Is the CPU or GPU the bottleneck in this configuration?
A: The GPU is the clear bottleneck. The i5-10400F provides ample performance, as evidenced by its 3DMark scores and the consistent frame rate drops that track resolution increases, which are GPU-bound.
Q: How does the RTX 3060 Ti compare to its closest rivals?
A: The RTX 3060 Ti has an average benchmark score of 25120, which is 0.2% lower than the AMD Radeon RX 6700M and 0.5% lower than the AMD Radeon RX 6600. It ranks in the 69th percentile among all GPUs.
Q: What is the best preset for 1080p gaming?
A: High settings at 1080p provide 99.4 FPS, which is the best balance of visual quality and performance. Ultra at 1080p is 76 FPS, but the visual improvement over High is not worth the 23.4 FPS loss.
Q: Why does 4K performance drop so sharply compared to 1440p?
A: The steep drop is due to the GPU’s 8 GB memory capacity and 448.0 GB/s bandwidth, which are insufficient for the pixel workload at 4K. The 133.2 GPixel/s pixel rate also becomes a limiting factor at this resolution.
How This Combo Ranks
In the comprehensive database of tested hardware combinations, the Intel Core i5-10400F with NVIDIA GeForce RTX 3060 Ti ranks 1261 out of 1699 combos for Hard West. This places it in the 74th percentile of all tested systems, meaning it outperforms roughly three-quarters of configurations in this game. The ranking is respectable, given that the game is not particularly demanding on CPU resources, but the mid-range GPU holds the combo back from higher placements.
The rank reflects the GPU’s performance ceiling. While the RTX 3060 Ti is a capable card, its 69th percentile ranking among all GPUs and its tight grouping with rivals like the RX 6700M and RX 6600 mean that it cannot compete with higher-tier cards in resolution scaling. The combo’s position in the bottom quarter of tested systems is primarily due to the GPU’s limitations at 4K, where it struggles to maintain playable frame rates.
The i5-10400F’s contribution to the rank is positive but not decisive. The CPU’s 73rd percentile ranking among all processors, with an average benchmark score of 14168, places it slightly below the AMD Ryzen 3 7320C (14277, -0.8% delta) and Intel Core i5-8500 (14332, -1.1% delta). This means the processor is not a weak link in the chain, but it also does not boost the combo above similar GPU pairings. The 1261st rank is a fair assessment of a mid-range CPU and GPU pairing that excels at 1080p and 1440p but falls short at 4K. For players targeting 1440p High, this combo is a solid choice, as evidenced by its 62 FPS result, but those expecting 4K performance will need to look at higher-tier GPUs.
Hardware Specifications
Intel Core i5-10400F
NVIDIA GeForce RTX 3060 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-10400F + NVIDIA GeForce RTX 3060 Ti in Hard West
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 49.5 |
| 3840x2160 | Medium | 41.0 |
| 3840x2160 | High | 31.9 |
| 3840x2160 | Ultra | 22.6 |
| 2560x1440 | Low | 99.4 |
| 2560x1440 | Medium | 80.2 |
| 2560x1440 | High | 62.0 |
| 2560x1440 | Ultra | 49.9 |
| 1920x1080 | Low | 156.5 |
| 1920x1080 | Medium | 129.1 |
| 1920x1080 | High | 99.4 |
| 1920x1080 | Ultra | 76.0 |
Hard West with ii5-10400F + Other GPUs
See how Hard West performs with the same CPU but different graphics cards.
Hard West with RTX 3060 Ti + Other CPUs
See how Hard West performs with the same GPU but different processors.
Other Games with ii5-10400F + RTX 3060 Ti
Explore FPS benchmarks for other games using this same hardware combination.