Hard West
This combination provides smooth gameplay with an average of 68 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 22 | 30 | 39 | 47 |
| 1440p QHD | 43 | 57 | 74 | 90 |
| 1080p Full HD | 67 | 90 | 117 | 143 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Hard West with AMD Ryzen 5 7500X3D + NVIDIA GeForce RTX 2060, In-Depth Analysis
The AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 2060 pairing lands near the bottom quartile of tested configurations for Hard West, securing the 2324th spot out of 2949 recorded combos. This placement places it in the 21st percentile of all tested systems, a modest standing that reflects the RTX 2060's position as a capable but aging performer in a turn-based tactics title that does not demand extreme hardware. The ranking suggests that while this combo can play the game, it does so with noticeable compromises at higher resolutions and settings, with the data indicating the GPU is the primary bottleneck in most scenarios. The CPU's strong benchmark pedigree—ranking in the 89th percentile against all processors—contrasts sharply with the GPU's 58th percentile standing, hinting that the processor has significant headroom left untapped by the graphics card in this specific workload.
The combo's rank is heavily influenced by the fact that Hard West is not a graphically intensive title by modern standards, yet the RTX 2060 still struggles to maintain high frame rates at 4K Ultra settings, where average FPS dips to 22. This indicates that the game's engine, despite its 2015 release date, can still present a meaningful challenge to mid-range GPUs when settings are maxed out. The 6 GB VRAM capacity of the RTX 2060 may also play a role in these results, though the measured data does not explicitly confirm VRAM saturation. The overall ranking implies that users should expect a playable but not exceptional experience, with the sweet spot appearing to be 1080p or 1440p with Medium to High settings for a smooth frame rate.
GPU Role
The NVIDIA GeForce RTX 2060 serves as the primary determinant of performance in this combo, given the relatively modest demands of Hard West. The GPU's 6 GB of GDDR6 memory on a 192-bit bus provides a bandwidth of 336.0 GB/s, which is sufficient for the game's textures and geometry at most settings, though the data suggests it may become a limiting factor at 4K Ultra where average FPS falls to 22. The card's base clock of 1365 MHz and boost clock of 1680 MHz, combined with 1920 shading units, deliver raw compute throughput that is adequate for a turn-based tactics game but not overwhelming. The 12 nm TU106 chip, containing 10,800 million transistors on a 445 mm² die, represents an older architecture that lacks the efficiency of newer designs, yet it still manages to produce playable results at lower resolutions.
Benchmark data for the RTX 2060 shows a Passmark G3D score of 14111, placing it in the 58th percentile of all GPUs, which aligns with its measured performance in Hard West. The card's nearest rivals include the NVIDIA GeForce GTX 580 with an average score of 15283 and a 0% deltaPct, the AMD Radeon 680M at 15270 with a 0.1% deltaPct, and the NVIDIA GeForce RTX 3050 OEM at 15199 with a 0.6% deltaPct. These close scores indicate that the RTX 2060 is firmly in the mid-range tier, and its performance in this game reflects that positioning. The GPU's DirectX 12 score of 53 in Passmark is notably low, but Hard West's 2015 release date likely means it relies on older DirectX 11 paths, where the card scores 110, making the game more dependent on the GPU's raw rasterization power rather than modern API features.
At 1080p with Low settings, the RTX 2060 achieves an average of 143 FPS, demonstrating that the GPU can easily handle the game's lighter workloads. However, the drop to 67 FPS at Ultra settings in the same resolution shows a significant performance penalty of over 50%, indicating that the card's 48 ROPs and 120 TMUs are stretched by the game's higher-quality effects. The GPU's FP32 performance of 6.451 TFLOPS provides a theoretical ceiling that the game never fully utilizes, as the frame rates at 4K suggest the memory bandwidth or fill rate becomes the limiting factor. The 14 Gbps effective memory speed, while not modern, offers enough bandwidth for the game's art style, which features detailed environments but not overly complex shaders.
CPU Role
The AMD Ryzen 5 7500X3D plays a supporting role in this combo, as Hard West's turn-based gameplay does not heavily stress the processor. With 6 cores and 12 threads, running at a base clock of 4.00 GHz and a boost clock of 4.50 GHz, this CPU possesses ample processing power for the game's AI calculations and pathfinding, which are typically single-threaded and modest in scope. The processor's 96 MB of shared L3 cache is a standout feature, potentially reducing memory latency in scenarios where the game repeatedly accesses the same data, though the measured FPS data does not indicate that CPU performance is a bottleneck at any resolution. The 5 nm TSMC process node and Raphael codename place this chip in the modern Zen 4 generation, but its release date of 2025-11-11 makes it a newer addition to the market, with a launch MSRP of $269.
Benchmark results for the CPU show a Passmark multithread score of 25047 and a single-thread score of 3494, which ranks it in the 89th percentile of all CPUs. Its nearest rivals include the Intel Core Ultra X9 388H with an average score of 44466 and a 0.2% deltaPct, the Intel Core i9-13950HX at 44342 with a 0.5% deltaPct, and the AMD Ryzen AI Max 385 at 44309 with a 0.6% deltaPct. These scores suggest that the 7500X3D is a high-performing processor, but in Hard West, the CPU's capabilities are largely underutilized, as the FPS scaling from 1080p to 4K shows a clear GPU limitation. The CPU's memory support for DDR5 with dual-channel configuration and 83.2 GB/s bandwidth provides fast data access, but the game's modest requirements mean this bandwidth is rarely a constraint.
The CPU's integrated Radeon Graphics, while present, is not used in this configuration, as the discrete RTX 2060 handles all rendering duties. The 65 W TDP of the processor indicates it runs cool and efficiently, which is beneficial for sustained performance, but again, this is not a factor in the measured FPS data. The Passmark physics score of 2779 and integer math score of 70774 show strong computational abilities, but in a turn-based tactics game, these are only relevant during load times and turn transitions, which are not captured in the average FPS metrics. Overall, the CPU role is to provide a stable platform that never hampers the GPU, and the data confirms this, as frame rates are consistently limited by the graphics card across all tested configurations.
Measured FPS Breakdown
The measured FPS data for this combo in Hard West reveals a clear performance hierarchy across resolutions and settings. At 1920x1080, the game runs smoothly across all presets: Low settings produce an average of 143 FPS, Medium settings yield 117 FPS with a minimum of 99 and maximum of 135, High settings achieve 90 FPS, and Ultra settings drop to 67 FPS. These numbers indicate that 1080p is the most comfortable territory for this hardware, with even Ultra settings maintaining a playable frame rate. The gap between Low and Ultra of 76 FPS highlights the significant impact of graphical settings on performance, but at no point does the game become unplayable at this resolution.
Moving to 2560x1440, the performance scales down proportionally. Low settings produce an average of 90 FPS, Medium settings achieve 74 FPS with a minimum of 63 and maximum of 85, High settings drop to 57 FPS, and Ultra settings fall to 43 FPS. These results show that 1440p remains viable for most settings, though Ultra begins to approach the lower bound of smooth gameplay. The difference between 1080p and 1440p at High settings is 33 FPS, representing a 37% reduction, which suggests the GPU is becoming more of a limiting factor as pixel count increases. At 1440p Medium, the minimum FPS of 63 ensures that even demanding scenes remain fluid, making this a recommended configuration for users with 1440p monitors.
At 3840x2160, the RTX 2060 starts to struggle. Low settings produce an average of 47 FPS, Medium settings achieve 39 FPS with a minimum of 33 and maximum of 45, High settings drop to 30 FPS, and Ultra settings fall to 22 FPS. These numbers indicate that 4K gaming is only feasible at Low settings, and even then, the frame rate is borderline for a smooth experience. The minimum FPS of 33 at Medium settings suggests potential stuttering during intense moments, while Ultra's 22 FPS average is likely to feel sluggish. The data clearly shows that 4K is not the intended resolution for this combination, and users should either lower the resolution or accept significant compromises in visual quality.
Resolution Scaling
The frame rate drops from 1080p to 4K reveal a pattern consistent with GPU-bound performance. At High settings, the average FPS decreases from 90 at 1080p to 57 at 1440p, a 37% reduction, and then to 30 at 4K, a further 47% reduction from the 1440p figure. This exponential decline indicates that the RTX 2060's rendering capabilities are being saturated as pixel count increases, with the 4K resolution requiring four times the pixel workload of 1080p. The fact that the FPS does not drop by a full 75% from 1080p to 4K suggests that other factors, such as memory bandwidth or fill rate, are partially mitigating the impact, but the overall trend is clear: higher resolutions disproportionately penalize this GPU.
At Low settings, the scaling is slightly less severe, with 143 FPS at 1080p dropping to 90 FPS at 1440p (37% reduction) and then to 47 FPS at 4K (48% reduction from 1440p). This indicates that even at the lowest settings, the GPU cannot maintain playable frame rates at 4K, as the pixel fill requirements exceed the card's capabilities. The Medium settings show a similar pattern, with 117 FPS at 1080p, 74 FPS at 1440p, and 39 FPS at 4K, representing a 67% total drop from 1080p to 4K. The Ultra settings suffer the most, falling from 67 FPS at 1080p to 43 FPS at 1440p to 22 FPS at 4K, a 67% reduction overall, which suggests that the combination of high pixel count and intensive effects overwhelms the GPU.
The resolution scaling data implies that the limiting component in this combo is clearly the GPU, as the CPU's strong benchmark scores would not cause such dramatic frame rate drops. If the CPU were the bottleneck, the FPS would remain relatively constant across resolutions, but the observed decline of over 50% from 1080p to 4K at all settings confirms that the RTX 2060 is the primary constraint. This is further supported by the fact that the CPU's single-thread score of 3494 is more than sufficient for a turn-based tactics game, which typically has low CPU demands. The data suggests that users with 4K displays should either upgrade the GPU or play at a lower resolution to achieve acceptable performance.
Settings Recommendations
Based on the measured FPS rows, the optimal settings for this combo depend on the user's target resolution and preference for visual quality versus frame rate. At 1920x1080, the Medium preset offers the best balance, delivering an average of 117 FPS with a minimum of 99 FPS, ensuring smooth gameplay without sacrificing too much visual fidelity. The High preset at 90 FPS is also viable, but the 27 FPS difference between Medium and High may not justify the visual improvements for all users. Ultra at 67 FPS is playable but approaches the threshold where frame drops might become noticeable, making it less recommended for competitive or fast-paced play.
For 2560x1440, the Medium preset is again the standout choice, achieving 74 FPS with a minimum of 63 FPS, which maintains fluidity even during heavy scenes. The High preset at 57 FPS is acceptable for turn-based gameplay, where reaction time is less critical, but the 17 FPS drop from Medium may be noticeable. Low settings at 90 FPS are an option for users prioritizing maximum smoothness, but the visual compromise is significant. Ultra at 43 FPS is not recommended, as it falls below the 60 FPS threshold that many consider the baseline for smooth performance, though the turn-based nature of the game makes it somewhat more tolerable.
At 3840x2160, only the Low preset, with an average of 47 FPS, provides a playable experience, though it is still below 60 FPS. Medium at 39 FPS and High at 30 FPS are marginal, and Ultra at 22 FPS is essentially unplayable. For 4K users, the data suggests that either lowering the resolution to 1440p or accepting Low settings is necessary. The minimum FPS of 33 at 4K Medium indicates potential stuttering, which could affect gameplay in a tactics title where sudden camera movements occur. Overall, the recommendation is to prioritize Medium settings at 1080p or 1440p, as this preset consistently provides the best combination of frame rate and visual quality across the measured data.
FAQ
Q: What is the best resolution for this combo in Hard West?
A: Based on the measured data, 1920x1080 provides the highest frame rates, with the Medium preset achieving 117 FPS average. At 2560x1440, Medium settings still deliver 74 FPS, making 1440p viable, but 4K is only playable at Low settings with 47 FPS, which is below the ideal smoothness threshold.
Q: How does the combo rank against other tested systems?
A: This combination ranks 2324th out of 2949 tested combos for Hard West, placing it in the 21st percentile. This indicates a below-average performance, primarily due to the RTX 2060's limitations at higher resolutions.
Q: Is the CPU or GPU the bottleneck in this game?
A: The data shows the GPU is the limiting component. Frame rates drop by over 50% from 1080p to 4K at all settings, which would not occur if the CPU were the bottleneck. The Ryzen 5 7500X3D ranks in the 89th percentile of CPUs, well above the GPU's 58th percentile.
Q: What settings should I use for the smoothest experience?
A: The Medium preset is recommended for both 1080p and 1440p, as it delivers the best balance of frame rate and visual quality. At 1080p, Medium achieves 117 FPS with a minimum of 99 FPS, while at 1440p, it maintains 74 FPS with a minimum of 63 FPS.
Q: Can this combo handle 4K gaming in Hard West?
A: At 4K, only Low settings provide a playable average of 47 FPS. Medium drops to 39 FPS with a minimum of 33 FPS, and Ultra falls to 22 FPS. The data indicates that 4K is not a practical resolution for this combo without significant visual compromises.
Q: How does the RTX 2060 compare to its nearest rivals in benchmarks?
A: The RTX 2060 has a Passmark G3D score of 14111, which is nearly identical to the NVIDIA GeForce GTX 580 at 15283 (0% deltaPct) and the AMD Radeon 680M at 15270 (0.1% deltaPct). This shows it is closely matched with these mid-range options.
Hardware Specifications
AMD Ryzen 5 7500X3D
NVIDIA GeForce RTX 2060
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7500X3D + NVIDIA GeForce RTX 2060 in Hard West
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 47.0 |
| 3840x2160 | Medium | 39.0 |
| 3840x2160 | High | 30.0 |
| 3840x2160 | Ultra | 22.0 |
| 2560x1440 | Low | 90.0 |
| 2560x1440 | Medium | 74.0 |
| 2560x1440 | High | 57.0 |
| 2560x1440 | Ultra | 43.0 |
| 1920x1080 | Low | 143.0 |
| 1920x1080 | Medium | 117.0 |
| 1920x1080 | High | 90.0 |
| 1920x1080 | Ultra | 67.0 |
Hard West with Ryzen 5 7500X3D + Other GPUs
See how Hard West performs with the same CPU but different graphics cards.
Hard West with RTX 2060 + Other CPUs
See how Hard West performs with the same GPU but different processors.
Other Games with Ryzen 5 7500X3D + RTX 2060
Explore FPS benchmarks for other games using this same hardware combination.