Greedfall

The Intel Core i5-14600KF paired with the NVIDIA GeForce RTX 5070 Ti ranks 153rd out of 1705 tested combos in Greedfall, placing it in the top 9% of all configurations. This is a strong result for an Action RPG that leans heavily on GPU throughput, though it is not the absolute top-tier pairing. The rank reflects a system that can push very high frame rates across most settings, with the CPU providing enough headroom to avoid bottlenecking the GPU at lower resolutions. The data positions this combo as a high-end solution, firmly in the upper echelon of tested hardware, but with clear performance ceilings visible at Ultra settings and 4K resolution.

How This Combo Ranks

The combo’s rank of 153 out of 1705 tested combinations places it well above the median, but the percentile data for the individual components tells a more nuanced story. The CPU sits in the 93rd percentile among all tested processors, while the GPU is in the 87th percentile among all tested graphics cards. This slight discrepancy suggests the GPU is the limiting factor in this pairing, though both are top-tier parts. In Greedfall specifically, the measured frame rates show that the system is capable of hitting the 90 FPS mark at 4K High, which is a demanding scenario. The ranking indicates that while there are faster combos, this one delivers a consistently high experience across the board, with the CPU’s strong single-thread performance ensuring that even at 1080p, where the GPU is less stressed, the frame rates remain exceptionally high.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is the primary driver of Greedfall’s frame rates, and its 16 GB of GDDR7 memory on a 256-bit bus provides 896.0 GB/s of bandwidth. This memory configuration is more than sufficient for the game’s textures and assets at 4K, as evidenced by the 90.5 average FPS at High settings. The GPU’s boost clock of 2452 MHz and base clock of 2295 MHz are relatively modest for a high-end card, but the architecture’s efficiency shines through. The card’s 8960 shading units and 280 texture mapping units handle the game’s rendering load effectively. The measured data shows a clear scaling pattern: dropping from 4K Ultra to 4K High yields a 52.6% improvement in average FPS (59.3 to 90.5), indicating that the GPU is heavily taxed at the highest settings. The card’s 87th percentile ranking among all GPUs is consistent with its performance in Greedfall, where it delivers playable frame rates at 4K and exceptional performance at lower resolutions.

Settings Recommendations

Based on the measured FPS data, the optimal balance between visual fidelity and performance is at High settings for 4K and 1440p resolutions. At 4K, High settings deliver 90.5 FPS, which is smooth for an Action RPG, while Ultra drops to 59.3 FPS, which is borderline for fast-paced combat. The jump from Medium to High at 4K costs only 9.5 FPS (from 100 to 90.5), making High the clear sweet spot for visual quality without sacrificing responsiveness. At 1440p, High settings hit 154.1 FPS, which is well beyond the refresh rate of most monitors, and Ultra still maintains 96.3 FPS. For 1080p, the data shows that even Ultra settings achieve 139.2 FPS, meaning players with high-refresh monitors can enable maximum settings without concern. Low settings are only recommended for competitive play at 1080p, where 307.1 FPS is achievable, but the visual trade-off is substantial.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates. Low settings produce an average of 307.1 FPS, Medium 240.9 FPS, High 214.3 FPS, and Ultra 139.2 FPS. The scaling from Low to Ultra is consistent, with each step down in settings yielding roughly a 25-30% gain in performance. This resolution is heavily GPU-bound, and the CPU’s 14 cores and 20 threads are more than adequate to feed the RTX 5070 Ti, as evidenced by the minimal performance drop between Medium and High.

Moving to 2560x1440, the frame rates remain very high but begin to show the GPU’s limits. Low settings average 209.7 FPS, Medium 163.6 FPS, High 154.1 FPS, and Ultra 96.3 FPS. The gap between High and Ultra is significant (57.8 FPS), suggesting that the Ultra preset introduces settings that are disproportionately taxing on the GPU. The 1440p High result of 154.1 FPS is excellent for the resolution, and the system handles this scenario with ease.

At 3840x2160, the GPU is pushed much harder. Low settings yield 125.1 FPS, Medium 100 FPS, High 90.5 FPS, and Ultra 59.3 FPS. The drop from High to Ultra is 34.5%, which is the largest single-setting penalty in the entire dataset. This indicates that Ultra at 4K is only viable for players who prioritize visual fidelity over frame rate, as 59.3 FPS is below the 60 FPS threshold that many consider the minimum for smooth gameplay. The 4K Low result of 125.1 FPS shows the card’s raw capability when not constrained by heavy settings.

FAQ

Q: What is the best resolution for this combo in Greedfall?

A: According to the measured data, 2560x1440 at High settings offers the best balance, achieving 154.1 FPS. This resolution provides a significant visual upgrade over 1080p while maintaining frame rates well above 144 Hz, which is ideal for high-refresh monitors.

Q: Can this system handle 4K gaming in Greedfall?

A: Yes, but with caveats. At 4K High settings, the average FPS is 90.5, which is smooth. However, at 4K Ultra, the average drops to 59.3 FPS, which is below the 60 FPS target. Players should stick to High or Medium settings at 4K for a consistent experience.

Q: How does the GPU compare to its nearest rivals?

A: The RTX 5070 Ti has an average benchmark score of 52086, which is nearly identical to the NVIDIA GeForce RTX 4080 (52085, 0% delta). It is 2.5% ahead of the NVIDIA RTX A1000 (50826) and 0.8% behind the AMD Radeon RX 7700S (52505). This indicates the card performs at a high level, but is not a significant outlier in either direction.

Q: Is the CPU a bottleneck for the GPU in this game?

A: The data suggests the CPU is not a limiting factor. The i5-14600KF has a boost clock of 5.30 GHz and scores 4643 in Cinebench R23 single-core, which is strong for gaming. At 1080p Low, the system achieves 307.1 FPS, indicating the CPU can keep up with the GPU’s output even at very high frame rates.

Q: What is the performance difference between High and Ultra settings?

A: The penalty for using Ultra over High varies by resolution. At 1080p, the difference is 75.1 FPS (from 214.3 to 139.2). At 1440p, it is 57.8 FPS (from 154.1 to 96.3). At 4K, it is 31.2 FPS (from 90.5 to 59.3). The relative impact is largest at 4K, where Ultra costs 34.5% of the High setting’s frame rate.

Q: How does the CPU rank against its competitors?

A: The i5-14600KF has an average benchmark score of 49367, which places it 0.4% ahead of the Intel Core i5-14600K (49166) and 0.6% ahead of the AMD Ryzen 9 5950X (49062). It is 0.5% behind the AMD EPYC 4345P (49595), showing it is a top-tier processor for gaming workloads.

CPU Role

The Intel Core i5-14600KF provides the computational foundation for this combo, and its specifications are well-suited for Greedfall. With 14 cores (6 performance and 8 efficiency) and 20 threads, the CPU handles both the game’s main thread and background tasks without issue. The base clock of 3.50 GHz boosts up to 5.30 GHz, which is crucial for the game’s single-threaded physics and AI calculations. The 24 MB of shared L3 cache helps reduce memory latency, and the processor’s 93rd percentile ranking among all CPUs confirms its high-end status. In terms of raw benchmarks, the CPU scores 32889 in Cinebench R23 multi-core and 4643 in single-core, showing a strong balance between multi-threaded and single-threaded performance. The nearest rival data shows the i5-14600KF is 1.4% ahead of the Intel Xeon Gold 5318H (48698) and 0.6% ahead of the AMD Ryzen 9 5950X (49062), though it trails the AMD EPYC 4345P by 0.5% (49595). For Greedfall, the CPU’s role is to sustain high frame rates without becoming a bottleneck, and the measured data confirms this is achieved: the system maintains over 200 FPS at 1080p Medium and over 150 FPS at 1440p High, indicating the CPU is not limiting performance even in CPU-light scenarios. The 125 W TDP is a moderate power envelope for a desktop processor, and the unlocked multiplier allows for overclocking, though the stock performance is already sufficient for this title.