Greedfall

The AMD Ryzen 9 9950X3D and NVIDIA GeForce RTX 5090 D combination delivers the top-tier performance expected from flagship hardware in Greedfall, ranking first out of 2,938 tested combos. The data shows a system that is overwhelmingly GPU-bound at higher resolutions, yet still provides exceptional frame rates even under maximum settings. This pairing excels at 1440p and 4K, making it a definitive choice for high-refresh-rate gaming in this title.

Resolution Scaling

The frame rate data reveals a classic resolution scaling curve, with the most significant performance drops occurring as pixel count increases. At 1080p with Low settings, the combo achieves an average of 383 FPS. Moving to 1440p Low reduces this to 266 FPS, a drop of 117 FPS. The transition from 1440p to 4K Low is even more pronounced, with the average falling to 159 FPS, marking a further 107 FPS decrease. This steep decline from 1080p to 4K indicates that the GPU is the primary limiting component, as the workload becomes increasingly demanding on the renderer.

The scaling pattern holds across all settings presets. For High settings, the average FPS goes from 273 at 1080p, down to 190 at 1440p, and finally to 113 at 4K. This represents a 59% reduction in frame rate from 1080p to 4K, a substantial hit that underscores the pixel-pushing demands of 4K resolution. The Ultra preset shows a similar trend, with averages of 175 FPS at 1080p, 121 FPS at 1440p, and 72 FPS at 4K. The 4K Ultra result is the only configuration that dips below the 100 FPS mark, highlighting the extreme load placed on the GPU when all settings are maxed out at the highest resolution.

The data suggests that the Ryzen 9 9950X3D, with its 16 cores and 32 threads, is not the bottleneck in this scenario. Even at 1080p Low, where the CPU workload is relatively higher compared to the GPU, the system still produces 383 FPS. This indicates the processor has ample headroom to feed the RTX 5090 D. The consistent frame rate drops across all settings when moving up in resolution point directly to the GPU's rendering capability as the definitive constraint. The 4K Ultra figure of 72 FPS, while lower than other presets, remains perfectly playable and shows the sheer power of this combination to handle even the most punishing scenarios in Greedfall.

GPU Role

The NVIDIA GeForce RTX 5090 D is the dominant force in this pairing, and its specifications explain the observed performance metrics. With a massive 32 GB of GDDR7 memory on a 512-bit bus, the card provides a memory bandwidth of 1.79 TB/s. This vast memory pool and bandwidth ensure that even at 4K resolution with high-detail textures, the GPU will not be starved for data, allowing for the consistently high average frame rates seen in the results.

The GPU's clock speeds, with a base of 2017 MHz and a boost of 2407 MHz, are the engine behind its raw compute power. This is complemented by 21,760 shading units, 170 RT cores, and 680 tensor cores, providing an immense amount of parallel processing capability. The FP32 performance of 104.8 TFLOPS confirms its compute throughput, which directly translates to the high frame rates observed. The card's 92nd percentile ranking among all GPUs, based on an average benchmark score of 77,712, confirms its position as a top-tier performer, though it is worth noting its nearest rivals in the benchmark database include the AMD Radeon RX 6850M XT and the NVIDIA Tesla P100, with score deltas ranging from -1.6% to -2.4%.

The data shows that the GPU's role is to provide massive, unconstrained performance. The 4K Medium preset, with an average of 125 FPS and a minimum of 106 FPS, illustrates a stable experience even under sustained load. The 1080p Low result of 383 FPS is a clear indicator that the GPU is capable of far more than what most displays can show, making the CPU the potential limiting factor only at extremely high frame rates. The RTX 5090 D's 575 W TDP and 950 W suggested PSU are the physical requirements for this level of performance, but the benchmark results justify the power draw with class-leading frame rates.

How This Combo Ranks

The combination of the AMD Ryzen 9 9950X3D and the NVIDIA GeForce RTX 5090 D achieves the top rank in Greedfall, positioning itself as the best-performing setup among all 2,938 tested combinations. This number one ranking is a direct result of the synergistic pairing of the 95th percentile CPU and the 92nd percentile GPU. The CPU's average benchmark score of 75,779 places it just ahead of its nearest rivals, including the AMD Ryzen 7 PRO 9755 and the AMD Ryzen 7 PRO 9755X3D, with a slim 0.1% performance delta. This indicates that the processor is at the very peak of its class.

The GPU, while ranking slightly lower in its own percentile, still delivers the raw power needed to push this combo to the top. Its average benchmark score of 77,712 is competitive, and when paired with the top-tier CPU, the system achieves a perfect score in this specific game. The rank of 1 out of 2,938 is a definitive statement: no other tested hardware configuration can match the average frame rates produced by this duo in Greedfall. This top ranking is not just about high average FPS; it also implies a level of consistency and minimum frame rate stability that other, less powerful combinations cannot achieve.

This result indicates that for users seeking the absolute maximum performance in Greedfall, this specific CPU and GPU pairing represents the pinnacle of what is available in the benchmark database. The data is measured, not estimated, providing a reliable reference point for system builders and enthusiasts. The combination's success lies not only in the individual strength of each component but also in their ability to work together without introducing a bottleneck, even at high resolutions and settings.

Measured FPS Breakdown

The measured FPS data provides a complete picture of performance across a matrix of resolutions and settings. The tests were conducted at 1920x1080, 2560x1440, and 3840x2160, each with Low, Medium, High, and Ultra settings. The data is presented as average FPS, with minimum and maximum FPS recorded for the Medium preset at each resolution.

At 1920x1080, the system delivers exceptional performance. The Low preset achieves an average of 383 FPS. The Medium preset averages 301 FPS, with a minimum of 256 FPS and a maximum of 346 FPS. The High preset yields an average of 273 FPS. The Ultra preset, while the most demanding, still produces a very high average of 175 FPS. These numbers demonstrate that at 1080p, the system is capable of driving high-refresh-rate monitors (240Hz and above) with ease across all settings.

Moving to 2560x1440, performance remains stellar. The Low preset averages 266 FPS. The Medium preset averages 209 FPS, with a minimum of 178 FPS and a maximum of 240 FPS. The High preset reaches an average of 190 FPS. The Ultra preset averages 121 FPS. These results indicate that 1440p is a sweet spot for this combo, providing frame rates high enough for competitive play on High settings while allowing for a visually rich experience on Ultra.

At 3840x2160, the GPU is pushed harder, but results remain impressive. The Low preset averages 159 FPS. The Medium preset averages 125 FPS, with a minimum of 106 FPS and a maximum of 143 FPS. The High preset averages 113 FPS. The Ultra preset averages 72 FPS. This is the only configuration that falls below the 100 FPS threshold, but it remains fluid and playable. The data confirms that the RTX 5090 D has sufficient power to handle 4K gaming at high refresh rates for most presets, and even the most demanding Ultra preset is playable.

FAQ

Q: What is the average frame rate at 4K with Ultra settings?

A: The average frame rate at 3840x2160 with the Ultra preset is 72 FPS.

Q: Does the system maintain a minimum FPS above 100 at 1440p Medium?

A: Yes, the minimum FPS recorded at 2560x1440 with the Medium preset is 178 FPS.

Q: What is the highest average FPS recorded in the entire test suite?

A: The highest average FPS is 383, achieved at 1920x1080 with the Low settings preset.

Q: How does the 4K High preset compare to the 1080p Ultra preset?

A: The 4K High preset averages 113 FPS, while the 1080p Ultra preset averages 175 FPS, showing a significant advantage for the lower resolution.

Q: What is the frame rate range for the Medium preset at 4K?

A: The Medium preset at 3840x2160 has a minimum of 106 FPS and a maximum of 143 FPS, with an average of 125 FPS.

Q: Is the CPU or GPU the main limiting factor at 1080p Low?

A: The data suggests the CPU is not a bottleneck, as the system still produces a very high 383 FPS, but it is likely the next limiting factor as the GPU has more headroom at this resolution.

Settings Recommendations

Based on the measured FPS data, the Ultra preset at 1440p offers the best balance of visual fidelity and performance, delivering an average of 121 FPS. This is a high enough frame rate for a smooth and responsive experience, while maximizing the game's graphical features. For users with standard 60Hz displays, the 4K Ultra preset, with an average of 72 FPS, is the definitive choice for the best visual quality, as it remains comfortably above the 60 FPS target.

For those prioritizing a competitive edge with the highest possible frame rates, the 1080p Low preset provides a staggering 383 FPS average, far exceeding the refresh rate of any standard monitor. However, a more practical recommendation for high-refresh-rate gaming would be the 1440p High preset, which averages 190 FPS and is well-suited for 144Hz or 165Hz displays. The 1440p Medium preset, with an average of 209 FPS, is also an excellent choice for users with 240Hz monitors, as it maintains a high average with a minimum of 178 FPS.

At 4K, the High preset with an average of 113 FPS is the recommended choice for those with high-refresh-rate 4K displays, offering a significant boost over the Ultra preset's 72 FPS while still providing a high level of visual detail. The 4K Medium preset, at 125 FPS average, presents another viable option, sacrificing some visual effects for a more substantial frame rate gain. The data shows that the Ultra preset is best reserved for users who prioritize image quality over raw frame rate, while the High and Medium presets are excellent choices for those seeking higher performance.