Greedfall

Greedfall

AVERAGE FPS
151
excellent

This combination delivers exceptional performance with an average of 151 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 55 86 95 120
1440p QHD 92 144 159 202
1080p Full HD 133 208 229 291

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 120
3840x2160 Medium 95
3840x2160 High 86
3840x2160 Ultra 55
2560x1440 Low 202
2560x1440 Medium 159
2560x1440 High 144
2560x1440 Ultra 92
1920x1080 Low 291
1920x1080 Medium 229
1920x1080 High 208
1920x1080 Ultra 133

Greedfall with AMD Ryzen 5 7500X3D + NVIDIA GeForce RTX 4070 Ti, In-Depth Analysis

The AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 4070 Ti combination delivers a remarkably consistent performance profile in Greedfall, with the data showing a system that scales predictably across resolutions and settings. The benchmark results indicate a pairing where the GPU becomes the dominant factor only at the highest visual loads, while the CPU’s substantial cache and core configuration keep frame rates exceptionally high at lower resolutions.

Resolution Scaling

The measured frames per second reveal a classic scaling pattern as resolution increases, but with a notably shallow drop-off that speaks to the headroom available in this pairing. At 1920x1080 with High settings, the average FPS stands at 208. Moving to 2560x1440 at the same preset yields 144 FPS, representing a 30.8% reduction. Pushing further to 3840x2160 at High brings the average down to 86 FPS, which is a 58.7% drop from the 1080p figure. This progression shows that while the absolute numbers decline, the system maintains playable performance even at 4K.

The scaling between Low and Ultra presets at each resolution provides deeper insight. At 1080p, the spread from Low (291 FPS) to Ultra (133 FPS) is a 54.3% performance penalty. At 1440p, the same comparison shows Low at 202 FPS and Ultra at 92 FPS, a 54.5% reduction. At 4K, Low delivers 120 FPS while Ultra falls to 55 FPS, a 54.2% decrease. This nearly identical percentage drop across all three resolutions suggests that the cost of each quality tier is resolution-independent, indicating a balanced load distribution between the CPU and GPU rather than a bottleneck at any single point.

The 4K results are particularly telling. The gap between Medium (95 FPS) and High (86 FPS) is just 9.5%, while the jump from High to Ultra (55 FPS) is a substantial 36% loss. This non-linear scaling at 4K indicates that the Ultra preset introduces effects that disproportionately tax the GPU’s memory subsystem and shading units, pushing the RTX 4070 Ti toward its limits. Conversely, the 1080p results show a more linear progression, with each preset step costing roughly 30-40 FPS, which implies that at this resolution, the CPU and GPU are both contributing to the frame rate without either becoming a hard limit.

GPU Role

The NVIDIA GeForce RTX 4070 Ti is built on the Ada Lovelace architecture with a 5 nm process node from TSMC. Its AD104 chip houses 35,800 million transistors across a 294 mm² die, with a transistor density of 121.8M per mm². The GPU operates with a base clock of 2310 MHz and a boost clock of 2610 MHz, while the 12 GB of GDDR6X memory runs at an effective 21 Gbps. This memory configuration, paired with a 192-bit bus, yields a bandwidth of 504.2 GB/s.

In Greedfall, the GPU’s role becomes evident in the 4K Ultra result of 55 FPS. The 12 GB frame buffer appears sufficient for the game’s textures at this resolution, as the Medium preset at 4K still achieves 95 FPS with a minimum of 80 FPS, suggesting no VRAM spillover or stuttering issues. The shader configuration of 7680 shading units, 240 TMUs, and 80 ROPs provides the raw throughput needed for the pixel-heavy loads at 3840x2160, but the Ultra preset’s additional effects push the pixel rate toward its limits.

The GPU’s compute capabilities, measured at 40.09 TFLOPS for FP32, contribute to the game’s physics and particle effects. The benchmark data shows that at 1440p High, the system reaches 144 FPS, which aligns with the GPU’s ability to sustain high frame rates without engaging its full boost clock. The 3DMark Steel Nomad DX12 score of 5024 and the Passmark G3D score of 31624 place this GPU in the 84th percentile of all GPUs, with its nearest rival being the NVIDIA GeForce RTX 5090 Mobile at a 0.8% lower average score.

FAQ

Q: What is the highest average FPS achievable at 4K with this combo?

A: The highest 4K average FPS is 120, achieved on the Low preset. The High preset yields 86 FPS, Medium yields 95 FPS, and Ultra drops to 55 FPS.

Q: How does the 1080p Ultra performance compare to 1440p High?

A: At 1080p Ultra, the average FPS is 133. At 1440p High, the average FPS is 144. This means the 1440p High preset delivers 8.3% higher frame rates than 1080p Ultra, which is counterintuitive but reflects the different rendering loads of the two presets.

Q: What is the minimum FPS recorded across all tested configurations?

A: The only recorded minimum FPS values are for the Medium preset: 80 FPS at 4K, 135 FPS at 1440p, and 194 FPS at 1080p. No minimum values are listed for Low, High, or Ultra presets.

Q: Is the CPU or GPU the limiting factor at 1080p Low?

A: At 1080p Low, the average FPS is 291. This high frame rate suggests the CPU is the primary contributor, as the GPU is not heavily loaded at this low preset. The Ryzen 5 7500X3D’s multithread score of 25047 and single-thread score of 3494 support this interpretation.

Q: How does the combo’s rank in Greedfall compare to its overall hardware percentile?

A: The combo ranks 373 out of 2938 tested combinations, placing it in the top 12.7% of all combos. The CPU is in the 89th percentile of all CPUs, and the GPU is in the 84th percentile of all GPUs.

Q: What is the FPS difference between Medium and High at 1440p?

A: At 1440p, the Medium preset averages 159 FPS with a minimum of 135 FPS, while the High preset averages 144 FPS. This represents a 9.4% advantage for Medium over High in average frame rate.

How This Combo Ranks

The AMD Ryzen 5 7500X3D and NVIDIA GeForce RTX 4070 Ti combination achieves a rank of 373 out of 2938 tested combos in Greedfall. This places the pairing in the 87.3rd percentile of all tested configurations, meaning it outperforms roughly 87% of all other combinations in this specific game. The rank reflects the synergy between the CPU’s 96 MB of shared L3 cache and the GPU’s 504.2 GB/s memory bandwidth, which together minimize data transfer bottlenecks.

The CPU’s nearest rivals in overall benchmark scores provide context for its contribution. The Intel Core Ultra X9 388H has an average score of 44466, which is 0.2% lower than the Ryzen 5 7500X3D’s 44573. The Intel Core i9-13950HX scores 44342, a 0.5% deficit, while the AMD Ryzen AI Max 385 scores 44309, a 0.6% difference. On the positive side, the Intel Core i5-14600 scores 44889, which is 0.7% higher than the 7500X3D. These margins are all under 1%, indicating that the CPU is competitive with a range of high-end processors.

On the GPU side, the RTX 4070 Ti’s average benchmark score of 44795 places it near the NVIDIA GeForce RTX 5090 Mobile, which scores 45152 for a 0.8% difference. The AMD Radeon Pro 5500 XT scores 45384, 1.3% higher, and the Intel Arc A730M scores 45592, 1.7% higher. The NVIDIA RTX A6000 scores 44075, which is 1.6% lower. This clustering shows that the RTX 4070 Ti sits in a tight performance band where small percentage differences separate it from both newer mobile parts and older workstation cards.

Measured FPS Breakdown

The measured FPS data covers three resolutions and four settings presets, providing 12 distinct data points. At 1920x1080, the Low preset achieves an average of 291 FPS, the highest single measurement in the dataset. The Medium preset follows at 229 FPS with a minimum of 194 and a maximum of 263. High drops to 208 FPS, and Ultra bottoms out at 133 FPS. The spread from Low to Ultra at 1080p is 158 FPS, showing the full range of performance scaling.

At 2560x1440, the Low preset averages 202 FPS. Medium achieves 159 FPS with a minimum of 135 and a maximum of 182. High records 144 FPS, and Ultra falls to 92 FPS. The delta between Low and Ultra at this resolution is 110 FPS, which is 30.4% narrower than the 1080p spread, indicating that the GPU begins to assert more influence as pixel count rises.

At 3840x2160, the Low preset maintains 120 FPS, which is still well above the 60 FPS threshold for smooth gameplay. Medium delivers 95 FPS with a minimum of 80 and a maximum of 109. High yields 86 FPS, and Ultra drops to 55 FPS, the only configuration in the dataset that falls below 60 FPS. The spread from Low to Ultra at 4K is 65 FPS, further compressing as the GPU becomes the primary constraint.

Settings Recommendations

The benchmark data suggests that the Medium preset offers the most balanced experience across all resolutions. At 4K, Medium achieves 95 FPS with a minimum of 80 FPS, which provides a comfortable margin above the 60 FPS standard for demanding scenes. The High preset at 4K yields 86 FPS, which is only 9.5% lower than Medium, but the Ultra preset at 55 FPS introduces the risk of noticeable stutter in combat-heavy areas.

At 1440p, the Medium preset’s 159 FPS average with a 135 FPS minimum is the standout choice. The High preset at 144 FPS is nearly identical in practical terms, so users with high-refresh-rate monitors could choose either. The Ultra preset at 92 FPS remains playable but sacrifices the headroom needed for smooth 144 Hz operation.

For 1080p, the High preset at 208 FPS and the Medium preset at 229 FPS both exceed the refresh rate of most monitors. The Ultra preset at 133 FPS is still sufficient for 120 Hz displays, but the Low preset at 291 FPS is only relevant for competitive play where maximum frame rates matter. The data indicates that the Medium preset provides the best combination of visual fidelity and performance margin, with its recorded minimum FPS values showing no signs of dipping below playable thresholds.

CPU Role

The AMD Ryzen 5 7500X3D is a 6-core, 12-thread processor from the 7000 series, built on the Zen 4 Raphael architecture. It operates with a base clock of 4.00 GHz and a boost clock of 4.50 GHz, consuming a TDP of 65 W. The CPU’s cache hierarchy features 64 KB of L1 per core, 1 MB of L2 per core, and a substantial 96 MB of shared L3 cache. This large L3 cache is the defining feature of the X3D line, and it directly benefits games like Greedfall that have repetitive data access patterns.

In the benchmark suite, the CPU scores 25047 in Passmark multithread and 3494 in Passmark single-thread. Its Passmark integer math score is 70774, while floating-point math reaches 43594. These scores place the CPU in the 89th percentile of all CPUs, with a Passmark average benchmark score of 44573. The CPU’s nearest rival, the Intel Core Ultra X9 388H, scores 44466, which is 0.2% lower, while the Intel Core i5-14600 scores 44889, which is 0.7% higher.

The CPU’s role in Greedfall becomes clear when examining the 1080p results. At Low settings, the 291 FPS average suggests the CPU is capable of driving frame rates far beyond what the GPU can render at higher presets. The 12 threads allow for efficient distribution of the game’s AI, physics, and draw-call processing. The 96 MB L3 cache reduces memory latency for frequently accessed game data, which is crucial for maintaining consistent frame pacing in open-world environments. The CPU’s 83.2 GB/s memory bandwidth over dual-channel DDR5 further supports this by ensuring the cores are never starved for data.

The 4K results show the CPU’s headroom. Even at 4K Ultra, where the GPU is clearly the bottleneck at 55 FPS, the CPU’s scores indicate it is not limiting performance. The Passmark physics score of 2779 and the find prime numbers score of 221 suggest adequate integer performance for game logic. The CPU’s boost clock of 4.50 GHz ensures that single-threaded tasks, which are common in game engine main loops, receive sufficient processing speed. Overall, the Ryzen 5 7500X3D provides the necessary computational foundation for the RTX 4070 Ti to operate without CPU-induced frame drops, particularly at the lower resolutions where the GPU has spare capacity.

Hardware Specifications

AMD Ryzen 5 7500X3D

Cores / Threads 6 / 12
Base Clock 4000 MHz
Boost Clock 4500 MHz
TDP 65W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 4070 Ti

VRAM 12 GB GDDR6X
Base Clock —
Boost Clock 2610 MHz MHz
TDP 285 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 7500X3D + NVIDIA GeForce RTX 4070 Ti in Greedfall

Resolution Settings Avg FPS
3840x2160 Low 120.0
3840x2160 Medium 95.0
3840x2160 High 86.0
3840x2160 Ultra 55.0
2560x1440 Low 202.0
2560x1440 Medium 159.0
2560x1440 High 144.0
2560x1440 Ultra 92.0
1920x1080 Low 291.0
1920x1080 Medium 229.0
1920x1080 High 208.0
1920x1080 Ultra 133.0

Greedfall with Ryzen 5 7500X3D + Other GPUs

See how Greedfall performs with the same CPU but different graphics cards.

Greedfall with RTX 4070 Ti + Other CPUs

See how Greedfall performs with the same GPU but different processors.

Other Games with Ryzen 5 7500X3D + RTX 4070 Ti

Explore FPS benchmarks for other games using this same hardware combination.