Fivem

Fivem with the Intel Core i5-12600KF and NVIDIA GeForce RTX 3050 4 GB produces a playable but constrained experience, with performance heavily dependent on resolution and settings. The data shows a system that can handle competitive frame rates at 1080p but quickly becomes bogged down at higher resolutions, reflecting a clear imbalance between the capable CPU and the entry-level GPU.

Resolution Scaling

The measured FPS drop from 1080p to 4K is dramatic, revealing the GPU as the primary limiting component. At Low settings, the average frame rate falls from 114.9 FPS at 1920x1080 to 76.2 FPS at 2560x1440, a 33.7% reduction, and then plummets to 40 FPS at 3840x2160, a further 47.5% drop from 1440p. This steep decline indicates that the rendering load at higher resolutions quickly overwhelms the graphics card.

The pattern is consistent across all settings presets. At High settings, the transition from 1080p (69.7 FPS) to 1440p (45.8 FPS) represents a 34.3% loss, and the jump to 4K (28 FPS) is another 38.9% loss. At Ultra, the numbers are even more punishing: 53.2 FPS at 1080p, 36.9 FPS at 1440p, and only 18 FPS at 4K. The scaling suggests that the RTX 3050 4 GB simply lacks the pixel throughput and memory bandwidth to sustain high frame rates past 1080p.

Interestingly, the relative performance gap between Low and Ultra settings narrows as resolution increases. At 1080p, Ultra is 53.7% slower than Low, but at 4K, Ultra is 55% slower. This indicates that while the CPU can feed the GPU at lower resolutions, the GPU becomes the absolute bottleneck at 4K, where even dropping to Low settings cannot prevent the frame rate from falling below 40 FPS. The data implies that for a smooth 60 FPS experience, 1080p is the practical ceiling for this combo, with 1440p requiring significant compromises.

CPU Role

The Intel Core i5-12600KF is a 10-core, 16-thread processor based on the Alder Lake architecture, with a base clock of 3.70 GHz and a boost clock of 4.90 GHz. Its benchmark scores are strong, with a Cinebench R23 multicore score of 23444 and a single-core score of 3309. The processor sits at the 84th percentile versus all CPUs, and its average benchmark score of 27827 is nearly identical to that of the Intel Core i9-10900K, which scores 27829 with a deltaPct of 0.

In Fivem, the CPU's role is evident in the 1080p results, where frame rates are significantly higher than at 4K. At Low settings, the 114.9 FPS at 1080p suggests the CPU is capable of feeding the GPU with enough data, but the GPU cannot translate that into higher frame rates at higher resolutions. The CPU's 20 MB of shared L3 cache and 16 threads likely help maintain stable frame pacing in a multiplayer environment, but the benchmark data does not isolate CPU-specific bottlenecks.

The fact that the i5-12600KF scores nearly identically to the i9-10900K (deltaPct of 0) and slightly below the i5-12600K (deltaPct of -0.1) indicates that this CPU is not the weak link in this pairing. The data suggests that the CPU has ample headroom, as the frame rate drops are almost entirely attributable to the GPU's inability to keep up with increased pixel counts. In a game like Fivem, which can be CPU-intensive in crowded multiplayer scenarios, this processor's 10 cores and high boost clock should provide a solid foundation, but the measured FPS data shows the GPU holding the system back.

GPU Role

The NVIDIA GeForce RTX 3050 4 GB is the clear bottleneck in this configuration. With only 4 GB of GDDR6 memory on a 128-bit bus, the GPU has a bandwidth of 192.0 GB/s, which is modest for modern gaming. Its base clock is 1545 MHz and boost clock is 1740 MHz, with 2048 shading units and 32 ROPs. The GPU sits at the 50th percentile versus all GPUs, indicating mid-pack performance.

The 4 GB VRAM is particularly concerning for Fivem at higher resolutions. At 4K Ultra, the average FPS collapses to 18, which is likely due to both the memory capacity being exceeded and the GPU's raw compute power (7.127 TFLOPS FP32) being insufficient. The measured FPS data shows that even at 1440p Medium, the GPU only manages 58.9 FPS, which is below the 60 FPS threshold for smooth gameplay. At 1080p Medium, the 87 FPS average is more respectable, but the GPU still cannot reach the 114.9 FPS achieved at Low settings.

The GPU's transistor count of 8,700 million on a 200 mm² die suggests a relatively small chip, and the 90 W TDP confirms it is an entry-level part. The data indicates that this GPU is best suited for 1080p gaming, as the frame rate drops off a cliff at 1440p and 4K. The 4 GB memory is likely a significant limitation, as Fivem's open-world environments can consume VRAM quickly at higher detail settings, leading to texture swapping and performance hits.

How This Combo Ranks

The combo ranks 1625 out of 1792 tested combos in Fivem, placing it in the bottom 9.3% of all configurations. This low ranking reflects the GPU's limitations, as the CPU is actually quite capable relative to its peers. The i5-12600KF's percentile of 84 versus all CPUs contrasts sharply with the RTX 3050's 50th percentile, creating an imbalanced pairing.

The ranking suggests that while this combo can run Fivem, it does so with significant compromises compared to other tested systems. The data shows that many other combos likely achieve higher frame rates at similar settings, which is expected given the RTX 3050's entry-level positioning. The combo's rank of 1625 indicates that for a game like Fivem, which can be demanding in multiplayer scenarios, this pairing is far from optimal.

However, the ranking should be interpreted in context. The CPU's strong benchmark scores (e.g., 23444 in Cinebench R23 multicore) suggest that if paired with a more powerful GPU, this system could perform much better. The bottleneck is clearly the GPU, as evidenced by the resolution scaling data. For users considering this combo, the rank indicates that they will be leaving performance on the table, particularly at higher resolutions.

FAQ

Q: What is the best resolution for this combo in Fivem?

A: The data shows that 1920x1080 is the only resolution where the average FPS exceeds 60 across all settings, with Low hitting 114.9 FPS, Medium at 87 FPS, and High at 69.7 FPS. At 2560x1440, only Low settings (76.2 FPS) break 60 FPS.

Q: How does the CPU compare to its nearest rivals?

A: The Intel Core i5-12600KF has an average benchmark score of 27827, which is virtually identical to the Intel Core i9-10900K (27829, deltaPct 0) and slightly below the Intel Core i5-12600K (27851, deltaPct -0.1). It is also 0.4% ahead of the Intel Core i7-13700H (27716).

Q: Is 4K gaming viable with this GPU?

A: No. At 3840x2160, the highest average FPS is 40 at Low settings, with Ultra dropping to 18 FPS. Even Medium only manages 31.7 FPS, making 4K unplayable for smooth gameplay.

Q: What is the GPU's memory configuration?

A: The NVIDIA GeForce RTX 3050 4 GB has 4 GB of GDDR6 memory on a 128-bit bus, providing a bandwidth of 192.0 GB/s. The memory clock is 1500 MHz (12 Gbps effective).

Q: How does the CPU's single-thread performance compare to its multicore?

A: The CPU scores 3309 in Cinebench R23 single-core and 23444 in multicore, showing strong scaling. Its 3DMark single-thread score is 1016, while the 16-thread score is 7956.

Q: What is the combo's rank among all tested systems?

A: The combo ranks 1625 out of 1792 tested combos in Fivem, placing it in the bottom 9.3% of configurations.

Settings Recommendations

Based on the measured FPS data, the optimal experience for this combo is at 1920x1080 with High settings, which yields 69.7 FPS. This provides a good balance between visual quality and smoothness, staying above the 60 FPS threshold. For players prioritizing higher frame rates, Low settings at 1080p deliver 114.9 FPS, which is ideal for competitive multiplayer scenarios.

At 2560x1440, the data suggests that Low settings (76.2 FPS) are the only viable option for maintaining playable frame rates, as Medium (58.9 FPS) dips below 60 FPS. High settings at 1440p (45.8 FPS) are playable but not ideal, while Ultra (36.9 FPS) should be avoided. The 4K resolution is not recommended at any setting, as even Low (40 FPS) fails to provide a smooth experience.

The data indicates that Ultra settings should be avoided entirely, as the GPU's 4 GB VRAM and limited compute power cannot handle the increased detail. Medium settings at 1080p (87 FPS) offer a solid middle ground, but High settings provide the best visual quality without sacrificing smoothness. For the best overall experience, 1080p High is the recommended preset, balancing image quality and performance.

Measured FPS Breakdown

At 1920x1080, the measured average FPS varies significantly by settings: Low achieves 114.9 FPS, Medium 87 FPS, High 69.7 FPS, and Ultra 53.2 FPS. The gap between Low and Ultra is 61.7 FPS, indicating that the GPU's performance scales poorly with increased visual fidelity.

At 2560x1440, the average FPS drops across all settings: Low 76.2 FPS, Medium 58.9 FPS, High 45.8 FPS, and Ultra 36.9 FPS. The drop from 1080p to 1440p at Low settings is 38.7 FPS, showing a significant resolution penalty.

At 3840x2160, the average FPS is critically low: Low 40 FPS, Medium 31.7 FPS, High 28 FPS, and Ultra 18 FPS. The difference between Low and Ultra at 4K is 22 FPS, and even the best-case scenario (Low) fails to reach 60 FPS. The data shows a consistent pattern of diminishing returns as resolution increases, with the GPU unable to maintain playable frame rates beyond 1440p Low.