Fivem

Fivem, a multiplayer modification platform for Grand Theft Auto V, presents a demanding workload that heavily taxes both the CPU and GPU. The combination of the Intel Core i5-12600KF and the NVIDIA GeForce GTX 1050 Ti produces a wide range of frame rates depending on resolution and settings, revealing a system where the graphics card is almost certainly the primary bottleneck. The data shows a clear hierarchy of performance that scales predictably with graphical load.

Resolution Scaling

The measured FPS data reveals a stark and consistent drop in performance as resolution increases, which is a classic indicator of a GPU-bound scenario. At 1080p with Low settings, the system achieves an average of 64.1 FPS, which is the highest performance level recorded for this combo. However, moving up to 1440p at the same Low settings, the average FPS falls to 39.3, a significant reduction of approximately 39%. The trend continues at 4K, where the average FPS plummets to 22.6. This pattern demonstrates that the GTX 1050 Ti’s rendering capabilities are being saturated by the increasing pixel count.

The scaling from 1440p to 4K is particularly punishing, with a further drop of roughly 42%. This suggests that the GPU is struggling to maintain a playable frame rate at 4K, regardless of the settings. Even when the load is lightened by selecting Low settings, the 4K resolution overwhelms the graphics card. The data implies that 4K is not a viable resolution for this combination, as even the lowest settings yield an average of just 22.6 FPS, which is below the threshold for smooth gameplay.

The difference between 1080p and 1440p is also substantial. At High settings, the average FPS drops from 39.5 at 1080p to 22.8 at 1440p, a reduction of over 42%. This significant penalty indicates that the GPU’s memory bandwidth and processing power are insufficient for the higher resolution. The question this data raises is whether the CPU is ever the limiting factor, or if the GPU consistently holds the system back. Given that the frame rates scale so dramatically with resolution, the evidence strongly points to the GPU being the sole performance ceiling in this configuration.

FAQ

Q: What is the best average FPS this combo can achieve in Fivem?

A: The highest measured average FPS is 64.1, which is achieved at 1920x1080 resolution with Low settings.

Q: How much faster is 1080p compared to 4K at High settings?

A: At High settings, the 1080p average FPS of 39.5 is significantly higher than the 4K average FPS of 14. This represents a performance advantage of roughly 182% for 1080p.

Q: Is the GTX 1050 Ti a strong performer in this game?

A: No. The GPU holds a percentile ranking of 30 versus all other GPUs, and its average benchmark score of 5316 places it in the lower tier of graphics cards.

Q: Does increasing settings from Low to Ultra have a large impact on performance?

A: Yes, the impact is substantial. At 1440p, the average FPS drops from 39.3 on Low to 23.2 on Ultra, a reduction of over 41%.

Q: What is the combo's overall ranking among all tested configurations?

A: The combination of the i5-12600KF and GTX 1050 Ti ranks 1779 out of 1792 combos tested in Fivem, placing it in the bottom percentile of all systems.

Q: Does the CPU have a high benchmark score?

A: Yes, the Intel Core i5-12600KF has an average benchmark score of 27827 and a percentile ranking of 84 versus all CPUs, indicating it is a high-performing processor.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is clearly the limiting component in this system for Fivem. Its specifications paint a picture of an entry-level graphics card that is overmatched by the game's demands. The GPU features 4 GB of GDDR5 memory on a 128-bit bus, providing a bandwidth of 112.1 GB/s. While this was adequate for games in its launch era, the data suggests it is insufficient for Fivem at higher resolutions. The 768 shading units and 32 ROPs are also modest numbers, which align with its low benchmark scores.

The GPU’s clocks are set to a base of 1291 MHz and a boost of 1392 MHz. Despite these relatively high clock speeds for the architecture, the raw processing power, measured at 2.138 TFLOPS, is not enough to maintain high frame rates. The GPU's performance percentile of 30 and its average benchmark score of 5316 are telling. Its nearest rivals include the NVIDIA GeForce 930A and the NVIDIA GeForce 940M, which are mobile and low-end desktop parts, confirming its position at the bottom of the performance stack.

The role of the 4 GB VRAM becomes apparent when examining the resolution scaling. At 4K, the game likely exceeds the memory capacity, leading to severe performance degradation. Even at 1440p, the combination of high resolution and texture detail may be pushing the memory limits, contributing to the significant frame rate drops observed when moving from Low to High settings. The data implies that the GTX 1050 Ti is not just a bottleneck, but a severe one that dictates the playable experience across all tested configurations.

How This Combo Ranks

The overall ranking for this CPU-GPU combination in Fivem is remarkably poor. The combo ranks 1779 out of 1792 tested combinations, placing it in the bottom 1% of all systems. This low ranking is a direct consequence of the GPU's weak performance, as the CPU is a much stronger component. The i5-12600KF's high benchmark score of 27827 and its 84th percentile ranking show that the processor is not the source of the system’s limitations.

The disparity between the CPU and GPU performance levels creates a severely imbalanced system. While the CPU is capable of handling complex calculations and multi-threaded workloads, the GPU cannot keep up with the graphical rendering demands. This mismatch is highlighted by the fact that the GPU's average benchmark score of 5316 is less than a fifth of the CPU's score. In the context of Fivem, this means the system's overall capability is almost entirely determined by the graphics card's performance.

When compared to other combos, this pairing is at the very bottom, suggesting that users with this configuration will have to make significant compromises in graphical fidelity to achieve playable frame rates. The data indicates that the system is only suitable for 1080p gaming at lower settings, and even then, it may struggle to maintain high and consistent frame rates in demanding multiplayer scenarios.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this hardware combination are clearly at 1080p with Low settings. This configuration is the only one that achieves an average FPS above 60, hitting 64.1 FPS. This is the only setting that can be considered "smooth" for most players. Choosing Medium settings at 1080p yields an average of 46.3 FPS, which is playable but may not provide a consistent experience in fast-paced multiplayer action. High settings at 1080p drop to 39.5 FPS, which is still playable but requires a compromise on visual quality.

At 1440p, the data suggests that even Low settings, with an average of 39.3 FPS, are not ideal. The frame rate is below the 60 FPS threshold and may be subject to noticeable drops. Ultra settings at 1440p are not recommended, as the average FPS falls to 23.2, which is generally considered unplayable. For 4K, the data is clear: the GTX 1050 Ti is not capable of providing a viable gaming experience, with all settings yielding an average FPS below 23.

The best experience per the measured rows is achieved by prioritizing frame rate over visual fidelity. The recommendation is to play at 1080p with Low settings to maximize smoothness. If a user prefers better visuals, Medium settings at 1080p offers a reasonable middle ground, but with a significant performance cost. The data shows that the Ultra preset is not viable at any resolution for this system, as it results in the lowest frame rates across the board.

Measured FPS Breakdown

The measured FPS data provides a detailed look at the system's performance across all tested configurations. At 1920x1080, the average FPS ranges from 64.1 on Low to 28.7 on Ultra. The progression is as follows: Low yields 64.1 FPS, Medium yields 46.3 FPS, High yields 39.5 FPS, and Ultra yields 28.7 FPS. This shows a clear and steady decline in performance as settings are increased.

At 2560x1440, the average FPS drops significantly. Low settings produce an average of 39.3 FPS, which is the only setting at this resolution to exceed 30 FPS. Medium settings average 30.5 FPS, High settings average 22.8 FPS, and Ultra settings average 23.2 FPS. The performance penalty for moving from 1080p to 1440p is substantial across all settings.

At 3840x2160, the system is unable to produce playable frame rates. Low settings average 22.6 FPS, Medium settings average 17.3 FPS, High settings average 14 FPS, and Ultra settings average 12 FPS. This confirms that 4K is not a viable resolution for this hardware. The data shows that the system is only capable of delivering a consistently playable experience at 1080p, and even then, only at Low settings.

CPU Role

The Intel Core i5-12600KF is a powerful processor that is not the limiting factor in this system. Its specifications include 10 cores and 16 threads, with a base clock of 3.70 GHz and a boost clock of 4.90 GHz. This high core count and clock speed allow it to handle complex tasks with ease. The CPU has a large 20 MB shared L3 cache, which helps improve performance in data-intensive applications.

The CPU's benchmark results confirm its high performance. It scores 23444 in Cinebench R23 multicore and 3309 in single-core. Its Passmark multithread score is 27575, and its average benchmark score is 27827. These scores place the CPU in the 84th percentile versus all CPUs. Its nearest rivals include the Intel Core i9-10900K and the Intel Core i5-12600K, with which it is practically tied in average score.

Given the CPU's strength, the frame rates in Fivem are not being held back by a lack of processing power. The CPU is capable of feeding the GPU with data far faster than the GTX 1050 Ti can render it. This creates a situation where the CPU is often idle, waiting for the GPU to catch up. The data strongly suggests that a more powerful GPU would yield significantly higher frame rates with this CPU, as the processor has ample headroom to support a much stronger graphics card. The CPU's role in this combo is to provide a stable platform, while the GPU is the definitive bottleneck.