Fivem

Settings Recommendations

The measured FPS data for Fivem with the Intel Core i5-11400F and NVIDIA GeForce RTX 4070 shows clear separation between the four quality presets at every resolution. At 1920x1080, the Ultra preset delivers 130.1 FPS average, which is fully playable, but the High preset reaches 164.1 FPS and Medium climbs to 205.6 FPS. The Low preset produces 261.8 FPS, a figure that approaches the practical ceiling for most displays.

Moving to 2560x1440, the pattern shifts. High produces 106.2 FPS, Medium 134.7 FPS, and Low 171.7 FPS. Ultra still manages 85.6 FPS, which remains above the 60 FPS threshold for smooth gameplay. At 3840x2160, the situation tightens considerably: High drops to 59 FPS, Medium to 74.7 FPS, and Ultra falls to 49 FPS. Only Low at 4K delivers a comfortable margin with 91.8 FPS.

The data suggests the best experience per the measured rows is the High preset at 1440p. It provides 106.2 FPS, which is above typical high-refresh targets, while retaining the visual quality improvements over Medium. At 1080p, High is also the sensible choice because the gap to Ultra is 34 FPS, yet High already exceeds 160 FPS. For 4K users, High is the only preset that stays near 60 FPS, but it just misses the mark at 59 FPS. Medium at 4K offers 74.7 FPS, making it the safer option for consistent frame pacing at that resolution. The Low preset is not recommended unless maximum frame rate is the sole priority, since the visual degradation is substantial.

GPU Role

The NVIDIA GeForce RTX 4070 carries 12 GB of GDDR6X memory on a 192-bit bus, yielding 504.2 GB/s of bandwidth. The memory clock is listed at 1313 MHz with 21 Gbps effective speed. The GPU's boost clock is 2475 MHz, with a base clock of 1920 MHz. These specifications place the RTX 4070 in the 81st percentile among all GPUs in the database.

The VRAM capacity is relevant for Fivem's multiplayer environments, which often feature dense player counts and custom assets. The 12 GB frame buffer is unlikely to be the limiting factor at the tested settings, as the frame rate scaling from 1080p to 4K follows a pattern consistent with compute-bound rendering rather than memory exhaustion. The 504.2 GB/s bandwidth supports high-resolution texture streaming without the stutter that can occur on narrower memory buses.

The Ada Lovelace architecture, built on a 5 nm process at TSMC, provides 29.15 TFLOPS of FP32 performance. The 5888 shading units and 184 tensor cores contribute to the GPU's overall throughput. In the context of Fivem's results, the RTX 4070's raw compute power appears sufficient to push frame rates well above 200 FPS at 1080p on Low settings, but the CPU becomes more influential as resolution drops. The transition from 1440p to 1080p yields a 54.7% improvement in High preset average FPS (from 106.2 to 164.1), which indicates the GPU is not fully saturated at lower resolutions.

FAQ

Q: Does the RTX 4070 maintain 60 FPS at 4K Ultra in Fivem?

A: No. The measured average at 3840x2160 with Ultra settings is 49 FPS, which falls 11 FPS short of the 60 FPS target. Medium at 4K achieves 74.7 FPS, and Low reaches 91.8 FPS.

Q: What is the highest frame rate recorded for this combo?

A: The maximum average FPS in the dataset is 261.8 FPS, achieved at 1920x1080 with Low settings. The next highest is 205.6 FPS at the same resolution with Medium settings.

Q: How does the i5-11400F compare to its nearest CPU rivals in synthetic benchmarks?

A: The Core i5-11400F has an average benchmark score of 17181, placing it in the 75th percentile. Its closest rival, the AMD Ryzen 7 5700U, scores 17189, a delta of 0%. The Intel Core i7-1260P and Core Ultra 7 164U both score 17212 and 17215 respectively, each showing a -0.2% delta. The i5-1240U scores 17141, a 0.2% delta.

Q: Is the RTX 4070's benchmark score competitive with other GPUs?

A: The RTX 4070 has an average benchmark score of 37283, placing it in the 81st percentile. Its nearest rival, the AMD Radeon RX Vega 56, scores 37507, which is a -0.6% delta. The NVIDIA GeForce MX570 A scores 38008 (-1.9%) and the RTX 4080 Mobile scores 38135 (-2.2%). The Radeon RX 5300M scores 36371, a 2.5% delta.

Q: What happens to FPS when switching from High to Ultra at 1440p?

A: The average FPS drops from 106.2 on High to 85.6 on Ultra at 2560x1440, a reduction of 20.6 FPS. The same switch at 1080p reduces FPS from 164.1 to 130.1, a 34 FPS drop.

Q: Does the 4K High preset meet the 60 FPS threshold?

A: The 3840x2160 High preset averages 59 FPS, which is 1 FPS below the 60 FPS target. This is a marginal miss, but Medium at 74.7 FPS provides a more comfortable margin if 4K gameplay is required.

How This Combo Ranks

The combination of the Intel Core i5-11400F and NVIDIA GeForce RTX 4070 ranks 426th out of 1792 tested combos in Fivem. This places the pairing in the top 23.8% of all configurations in the database for this specific game. The rank reflects the balance between the CPU's 6-core, 12-thread configuration with a 4.40 GHz boost clock and the GPU's high compute throughput.

The i5-11400F's synthetic benchmarks show a single-thread score of 868 in 3dmark, 2029 in Cinebench R23, and 2981 in Passmark. Its multi-thread scores are 5652 in 3dmark max threads and 14372 in Cinebench R23. These figures indicate a capable mid-range processor that can keep up with the RTX 4070 in most scenarios. The CPU's 75th percentile ranking among all processors, combined with the GPU's 81st percentile, suggests the combo is well-matched without severe bottlenecking.

The 426th rank out of 1792 combos means there are 425 configurations that deliver higher average FPS in Fivem. These are likely to feature higher-tier CPUs or GPUs, but the gap is not enormous given the strong 1080p and 1440p results. The rank also implies that the combo outperforms the majority of tested systems, which is expected given the RTX 4070's position in the GPU hierarchy.

Resolution Scaling

The FPS scaling from 1080p to 4K reveals how the workload shifts between CPU and GPU. At High settings, the average FPS goes from 164.1 at 1080p to 106.2 at 1440p (a 35.3% drop) and then to 59 at 4K (a 44.4% drop from 1440p). The percentage reduction from 1440p to 4K is larger than from 1080p to 1440p, indicating that the GPU becomes increasingly dominant as pixel count rises.

For Low settings, the progression is 261.8 at 1080p, 171.7 at 1440p (34.4% drop), and 91.8 at 4K (46.5% drop from 1440p). The Low preset shows a similar pattern, suggesting that the rendering resolution is the primary factor. However, the absolute FPS at 1080p Low (261.8) is so high that the CPU is likely the limiting component at that point, since the GPU has spare capacity.

The Medium preset follows the same trend: 205.6 at 1080p, 134.7 at 1440p (34.5% drop), and 74.7 at 4K (44.5% drop). Ultra settings show 130.1 at 1080p, 85.6 at 1440p (34.2% drop), and 49 at 4K (42.8% drop). The consistency of these percentage drops across presets indicates that the scaling is primarily resolution-driven, not settings-driven. The limiting component at 4K is clearly the GPU, as even the Low preset only reaches 91.8 FPS. At 1080p, the CPU's role becomes more apparent, with the Low preset exceeding 260 FPS but not scaling linearly with the GPU's theoretical capacity.

Measured FPS Breakdown

At 1920x1080, the measured average FPS values are as follows: Low 261.8, Medium 205.6, High 164.1, and Ultra 130.1. The delta between Low and Medium is 56.2 FPS, between Medium and High is 41.5 FPS, and between High and Ultra is 34 FPS. The reductions are fairly consistent, though the absolute drop from Low to Ultra is 131.7 FPS, which represents a 50.3% decrease in frame rate.

At 2560x1440, the averages are Low 171.7, Medium 134.7, High 106.2, and Ultra 85.6. The gap from Low to Ultra is 86.1 FPS, a 50.1% reduction. The step from Low to Medium is 37 FPS, Medium to High is 28.5 FPS, and High to Ultra is 20.6 FPS. The percentage drops between presets are similar to 1080p, confirming that settings have a predictable impact regardless of resolution.

At 3840x2160, the averages are Low 91.8, Medium 74.7, High 59, and Ultra 49. The total range from Low to Ultra is 42.8 FPS, a 46.6% reduction. The step from Low to Medium is 17.1 FPS, Medium to High is 15.7 FPS, and High to Ultra is 10 FPS. Notably, the 4K Ultra setting is the only configuration in the dataset that falls below 50 FPS. The 4K High setting at 59 FPS is the only other result under 60 FPS. All 1440p and 1080p configurations exceed 85 FPS, with the majority exceeding 100 FPS.

The data shows that the RTX 4070 handles 1440p with ease across all settings, and 1080p is well above any practical refresh rate need. The 4K results are playable for Medium and Low settings, but high-fidelity 4K requires accepting a frame rate below 60 FPS. For users with 144Hz or higher refresh displays, the High preset at 1440p (106.2 FPS) or even Ultra at 1440p (85.6 FPS) offers the best combination of visual quality and smoothness.