Fivem

The AMD Ryzen 9 9900X paired with the NVIDIA GeForce GTX 1070 presents a stark contrast in capabilities within Fivem. The CPU is a modern 12-core, 24-thread processor based on the Zen 5 architecture, with a base clock of 4.40 GHz and a boost clock of 5.60 GHz. This places it in the 94th percentile of all CPUs tested, indicating top-tier processing power. Its benchmark scores reinforce this, with a Cinebench R23 multicore result of 46438 and a single-core score of 6555, alongside a Geekbench single-core score of 3341. In contrast, the GTX 1070 is a Pascal-generation GPU from 2016, featuring 8 GB of GDDR5 memory on a 256-bit bus, with a base clock of 1506 MHz and a boost clock of 1683 MHz. Its performance percentile sits at 51, squarely in the mid-range of all GPUs.

CPU Role — cores, clocks, and how they relate to this game's results

The Ryzen 9 9900X is a computational powerhouse that is largely underutilized in this configuration. With 12 cores and 24 threads, it offers immense parallel processing capability, reflected in its 3DMark max-thread score of 13929 and Passmark multithread score of 54643. For a multiplayer game like Fivem, which often involves complex server-side simulation and numerous connected players, the CPU's ability to handle multiple threads is theoretically beneficial. The processor's strong single-thread performance, evidenced by a 3DMark single-thread score of 1286 and a Passmark single-thread score of 4672, is also crucial for game logic and physics calculations that are often single-threaded.

However, the measured FPS data suggests that the system is not CPU-bound at most settings and resolutions. At 1080p with Low settings, the system achieves 127.8 FPS, a figure that is more likely constrained by the GPU's rendering limits than the CPU's processing speed. The CPU's massive headroom means that in most scenarios, it is waiting for the GPU to deliver frames. The gap between the CPU's capabilities and the GPU's output is significant. For instance, the Ryzen 9 9900X's average benchmark score of 54450 places it just 0.7% above the Intel Core i7-14700F and 0.4% below the AMD Ryzen 9 9900X3D. This indicates that the CPU is not the bottleneck; even a modestly slower CPU would likely produce similar frame rates with this GPU. The CPU's role here is to ensure that frame pacing remains stable and that there are no CPU-induced stutters, allowing the GPU to be the sole limiter of performance.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce GTX 1070 is the primary factor dictating the frame rates observed in this dataset. Its 8 GB of GDDR5 memory, with a memory clock of 2002 MHz and a bandwidth of 256.3 GB/s, is adequate for 1080p and 1440p gaming, but the card's raw compute power is the limiting factor at higher resolutions. The GPU's FP32 performance of 6.463 TFLOPS and its 1920 shading units are the hardware resources that must process the visual data for Fivem. Its benchmark scores are modest, with a Passmark G3D score of 13498 and a 3DMark Steel Nomad DX12 score of 1082, placing it in the 51st percentile of all GPUs.

The data shows that the GTX 1070 is the clear bottleneck in this system. At 1080p High settings, the system reaches 79.4 FPS, which is a playable figure, but it demonstrates that the GPU is working hard. The performance scaling when lowering settings from Ultra to Low at 1080p shows a significant jump from 64.2 FPS to 127.8 FPS, a clear indication that the GPU's fill rate and shader processing are the limiting factors. The GPU's performance relative to its nearest rivals is telling. It scores just 1.4% lower than the NVIDIA GeForce GTX 1650 SUPER and 1.3% lower than the NVIDIA GeForce GTX 880M, confirming its mid-range standing. The GTX 1070 cannot leverage the Ryzen 9 9900X's power; it is a pairing where the GPU's age and mid-range positioning cap the system's overall gaming performance.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The resolution scaling data provides a textbook example of GPU-bound performance. Moving from 1080p to 1440p to 4K at the same settings shows a consistent and expected drop in frame rates, which is directly attributable to the increasing pixel count that the GTX 1070 must render. At High settings, the system produces 79.4 FPS at 1920x1080, 56.4 FPS at 2560x1440, and 32.5 FPS at 3840x2160. This represents a 29% drop from 1080p to 1440p, and a further 42% drop from 1440p to 4K. This trend is consistent across all settings, confirming that the GPU is the primary constraint.

The performance gap between Low and Ultra settings also widens with resolution. At 1080p, the difference between Low (127.8 FPS) and Ultra (64.2 FPS) is 63.6 FPS. At 4K, this difference narrows to 23.2 FPS (48.7 FPS on Low vs. 25.5 FPS on Ultra). This is because at higher resolutions, the GPU is so saturated with pixel work that reducing the quality settings has a diminishing impact; the bottleneck shifts from shader complexity to pure pixel throughput. The CPU's influence on these numbers is negligible, as its performance headroom is massive at all resolutions. The data indicates that to achieve higher frame rates at 4K, a more powerful GPU would be required, while the Ryzen 9 9900X would continue to provide ample support without becoming a limiting factor. The 1080p Low result of 127.8 FPS is the only scenario where the system approaches a frame rate that might begin to challenge the CPU's single-thread capabilities, but even this is well within the CPU's limits.

FAQ

Q: Is the AMD Ryzen 9 9900X a good match for the NVIDIA GeForce GTX 1070 in Fivem?

A: No, the pairing is heavily unbalanced. The CPU is in the 94th percentile of all CPUs, while the GPU is in the 51st percentile. The measured FPS data shows that the GPU is the consistent bottleneck at all resolutions and settings, meaning the CPU's considerable power is left largely unused.

Q: What is the best resolution to play Fivem with this combo for a balance of quality and performance?

A: Based on the data, 1920x1080 is the most sensible choice. At High settings, the system achieves 79.4 FPS, which is a smooth experience. At 2560x1440, the frame rate drops to 56.4 FPS on High, which is playable but less fluid. The 3840x2160 resolution yields only 32.5 FPS on High, which is likely not a desirable experience for fast-paced gameplay.

Q: How does the GTX 1070's performance in this game compare to its closest rivals?

A: The GTX 1070's average benchmark score is 12331, which is 1.4% lower than the GTX 1650 SUPER and 1.3% lower than the GTX 880M. It is only 0.7% higher than the Quadro K4200. This indicates that its performance level is closely clustered with these other mid-range cards.

Q: What does the FPS drop from 1080p to 4K indicate about the system's limiting component?

A: The consistent and significant frame rate drops with increasing resolution indicate that the system is entirely GPU-bound. For example, at High settings, the FPS drops from 79.4 at 1080p to 56.4 at 1440p and then to 32.5 at 4K. A CPU-bound system would not show such a drastic dependency on resolution.

Q: Can the Ryzen 9 9900X's high multi-threaded performance benefit Fivem in any way here?

A: While Fivem is a multiplayer game that can utilize multiple threads, the measured data shows that the GPU is the limiting factor. The CPU's 12 cores and 24 threads, along with its 3DMark max-thread score of 13929, provide immense headroom. This ensures that the CPU will not introduce stutters or frame drops, but it does not translate to higher frame rates in this specific configuration.

Q: What is the performance difference between Ultra and Low settings at 4K?

A: At 3840x2160, the difference is 23.2 FPS, with Low settings producing 48.7 FPS and Ultra settings producing 25.5 FPS. This relatively small gap compared to 1080p shows that the GPU is so overloaded at 4K that reducing graphical fidelity provides only a modest performance boost.

How This Combo Ranks

The combination of the AMD Ryzen 9 9900X and the NVIDIA GeForce GTX 1070 is ranked 1487th out of 1792 tested combos in Fivem. This places it in the lower 17% of all configurations, which is a logical result given the significant mismatch between the high-end CPU and the mid-range GPU. The rank reflects that this pairing does not deliver exceptional gaming performance in this specific title. The CPU's high percentile (94th) is effectively wasted, as the GPU's 51st percentile standing anchors the overall system performance. If this combo were paired with a more powerful GPU, the rank would likely improve dramatically, as the CPU has the headroom to support significantly higher frame rates. However, as measured, the system's capabilities are firmly limited by the GTX 1070. The data suggests that many other combinations, even with a weaker CPU but a stronger GPU, would outperform this pairing in Fivem. This ranking is a direct consequence of the GPU being the bottleneck in every measured scenario, preventing the CPU's strengths from being realized in the game's performance metrics.

Measured FPS Breakdown

The following are the exact average FPS figures measured for this system in Fivem.

1920x1080:

• Low: 127.8 FPS
• Medium: 104.5 FPS
• High: 79.4 FPS
• Ultra: 64.2 FPS

2560x1440:

• Low: 89.1 FPS
• Medium: 66.8 FPS
• High: 56.4 FPS
• Ultra: 45.0 FPS

3840x2160:

• Low: 48.7 FPS
• Medium: 40.1 FPS
• High: 32.5 FPS
• Ultra: 25.5 FPS

The data shows a clear performance hierarchy. At 1080p, the system is capable of a fluid experience, especially on lower settings. However, the frame rates decrease predictably as resolution increases. The 4K Ultra result of 25.5 FPS is the lowest recorded, confirming that this resolution is not viable for this combination. The differences between settings are most pronounced at 1080p, where the GPU is less saturated, and become less impactful at 4K, where the pixel fill rate is the primary constraint.