Fivem

Fivem is a demanding multiplayer title where the AMD Ryzen 5 9600X and NVIDIA GeForce RTX 4070 Ti combo shows a clear performance hierarchy. The data indicates that the RTX 4070 Ti is the primary driver of frame rates, with the CPU providing enough headroom to avoid becoming a bottleneck in most scenarios. The measured results place this pairing at rank 207 out of 1792 tested combinations, placing it in the top 11.5% of all tested systems, a strong result that reflects well on both components.

Resolution Scaling

The performance drop from 1080p to 4K is steep and consistent across all settings, revealing the GPU-bound nature of Fivem at higher resolutions. At High settings, the average frame rate falls from 194.4 FPS at 1920x1080 to 128.1 FPS at 2560x1440, a 34% reduction, and then to 67.6 FPS at 3840x2160, a 47% further drop. This pattern is typical of a system where the graphics card's rendering throughput becomes the limiting factor as pixel count rises.

The scaling from 1440p to 4K is particularly aggressive. At Medium settings, the drop is from 160.8 FPS to 89.7 FPS, a 44% reduction, while at Ultra settings it falls from 96.2 FPS to 52.2 FPS, a 46% loss. These figures indicate that the RTX 4070 Ti's 12 GB of GDDR6X memory and 192-bit bus are being saturated at 4K, especially with higher quality presets. The GPU's 504.2 GB/s of bandwidth is sufficient for 1440p but becomes a constraint at 4K.

At 1080p, the scaling is much flatter, suggesting the CPU's role becomes more prominent. The jump from Low to Ultra at 1080p costs 152.5 FPS (from 304.1 to 151.6), but the resolution drop from 1080p to 1440p at Low settings only costs 104.2 FPS. This indicates that at lower resolutions, the AMD Ryzen 5 9600X's six cores and 12 threads can feed frames fast enough, but the GPU's workload increases disproportionately with resolution. The data strongly suggests that for 4K gaming, users should expect to use Medium or High presets, as Ultra drops below 60 FPS.

Settings Recommendations

The most balanced experience is found at High settings across all resolutions, as it offers the best compromise between visual quality and frame rate. At 1920x1080, High delivers 194.4 FPS, which is 42.8 FPS higher than Ultra but still 49.7 FPS lower than Medium. At 2560x1440, High achieves 128.1 FPS, comfortably above the 60 FPS threshold and only 32.7 FPS behind Medium. At 3840x2160, High produces 67.6 FPS, which is playable but not ideal for competitive play.

For maximum visual fidelity, Ultra is only viable at 1080p where it maintains 151.6 FPS, but at 1440p it drops to 96.2 FPS and at 4K it falls to 52.2 FPS, which is below the smoothness most gamers expect. Low settings provide the highest frame rates, with 304.1 FPS at 1080p and 108.4 FPS at 4K, but the visual compromise is significant. Medium settings offer a middle ground, with 243.7 FPS at 1080p and 89.7 FPS at 4K, making it a strong choice for high-refresh-rate 1440p displays.

The data suggests that High is the sweet spot for this combo, as it maintains playable frame rates at 4K while providing excellent performance at lower resolutions. For users with 144Hz or 165Hz monitors at 1440p, High settings are ideal, while 4K users should stick to High or Medium to stay above 60 FPS.

How This Combo Ranks

This pairing of the AMD Ryzen 5 9600X and NVIDIA GeForce RTX 4070 Ti achieves a combo rank of 207 out of 1792 tested combinations in Fivem, placing it in the top 11.5% of all systems tested. This is a strong result, indicating that the combination is well-suited for this game's demands. The CPU's percentile rank of 85 among all processors and the GPU's identical percentile rank of 85 among all graphics cards suggest that both components are above average, but the combo's relative performance in Fivem is even better than the individual component percentiles might suggest.

The nearest rivals for the CPU include the Intel Core i5-13490F and AMD Ryzen 5 230, both with average scores within 0.3% of the Ryzen 5 9600X, indicating that the CPU is not a differentiator in this game. Similarly, the GPU's nearest rivals, such as the NVIDIA GeForce RTX 5090 Mobile and Intel Arc A730M, are within 1.5% of the RTX 4070 Ti's average benchmark score. This suggests that the combo's high rank is more attributable to the overall system balance than to either component being exceptionally better than its immediate competitors.

The rank of 207 out of 1792 means that roughly 1585 other combinations performed worse, which is a strong endorsement of this pairing for Fivem. However, the data also shows that there is significant room for improvement, as the top 11.5% of combos achieve higher frame rates, likely through more powerful GPUs.

Measured FPS Breakdown

At 1920x1080, the combo delivers exceptionally high frame rates across all settings. Low settings produce 304.1 FPS, Medium drops to 243.7 FPS, High achieves 194.4 FPS, and Ultra bottoms out at 151.6 FPS. These numbers indicate that at 1080p, the system is heavily GPU-limited at lower settings, with the CPU able to sustain very high frame rates.

Moving to 2560x1440, the frame rates remain strong but show a clear decline. Low settings yield 199.9 FPS, Medium produces 160.8 FPS, High reaches 128.1 FPS, and Ultra falls to 96.2 FPS. The 1440p results are roughly 34-35% lower than the corresponding 1080p results for each setting, which is consistent with the increased pixel count.

At 3840x2160, the performance drops significantly. Low settings maintain 108.4 FPS, Medium produces 89.7 FPS, High achieves 67.6 FPS, and Ultra drops to 52.2 FPS. The 4K results are approximately 45-47% lower than the 1440p results for each setting, demonstrating the heavy load placed on the GPU at this resolution. The difference between Low and Ultra at 4K is 56.2 FPS, while at 1080p it is 152.5 FPS, showing that the GPU's limitations become more pronounced as resolution increases.

GPU Role

The NVIDIA GeForce RTX 4070 Ti plays the dominant role in this combo's Fivem performance, as evidenced by the steep frame rate drops at higher resolutions. The GPU features 12 GB of GDDR6X memory on a 192-bit bus, providing 504.2 GB/s of bandwidth, which is sufficient for 1080p and 1440p but becomes a limiting factor at 4K with higher presets. The boost clock of 2610 MHz and base clock of 2310 MHz allow the card to sustain high throughput, with a pixel rate of 208.8 GPixel/s and a texture rate of 626.4 GTexel/s.

The GPU's 7680 shading units and 60 RT cores contribute to its strong compute performance, with FP32 throughput of 40.09 TFLOPS. This raw compute power is evident in the measured FPS at 1080p Low settings, where the card achieves 304.1 FPS, suggesting that the GPU is not the bottleneck at lower resolutions. However, at 4K Ultra, the frame rate drops to 52.2 FPS, indicating that the GPU's memory bandwidth and fill rate are being fully utilized.

The GPU's percentile rank of 85 among all graphics cards places it above average, and its average benchmark score of 44900 is competitive with its nearest rivals. The data shows that the RTX 4070 Ti is well-suited for Fivem at 1080p and 1440p, but users targeting 4K should adjust settings accordingly to maintain smooth frame rates.

FAQ

Q: What is the highest frame rate achievable with this combo at 1080p?

A: At 1920x1080 with Low settings, the combo achieves an average of 304.1 FPS, which is the highest measured frame rate in the dataset.

Q: Can this system handle 4K gaming in Fivem?

A: Yes, at 3840x2160 with High settings, the combo averages 67.6 FPS, and with Medium settings it produces 89.7 FPS, both of which are playable. However, Ultra settings drop to 52.2 FPS.

Q: How does the CPU compare to its nearest rivals?

A: The AMD Ryzen 5 9600X has an average benchmark score of 28246, which is 0.3% higher than the Intel Core i5-13490F and 0.3% higher than the AMD Ryzen 5 230.

Q: What is the best setting preset for a 144Hz monitor at 1440p?

A: At 2560x1440, High settings produce 128.1 FPS, which is above 60 FPS but below 144Hz. Medium settings at 160.8 FPS are better suited for a 144Hz display.

Q: How does the GPU compare to its nearest rivals?

A: The NVIDIA GeForce RTX 4070 Ti has an average benchmark score of 44900, which is 0.6% lower than the RTX 5090 Mobile and 1.5% lower than the Intel Arc A730M.

Q: Is the system CPU-bound or GPU-bound in Fivem?

A: The data indicates the system is GPU-bound at higher resolutions, as frame rates drop significantly from 1080p to 4K. At 1080p, the CPU can sustain high frame rates, but the GPU becomes the limiting factor as resolution increases.

CPU Role

The AMD Ryzen 5 9600X provides a solid foundation for this combo, with six cores and 12 threads running at a base clock of 3.90 GHz and a boost clock of 5.40 GHz. The CPU's Zen 5 architecture on a 4 nm process allows for strong single-thread performance, as evidenced by its 3dmark single-thread score of 1253 and Cinebench R23 single-core score of 3603. The 32 MB of shared L3 cache helps reduce latency in game workloads.

The CPU's multithreaded performance is also respectable, with a Cinebench R23 multicore score of 25525 and a passmark multithread score of 30027. This indicates that the CPU can handle the multi-threaded nature of Fivem's multiplayer environment, which often involves processing many player positions and interactions. The CPU's percentile rank of 85 among all processors places it above average, and its average benchmark score of 28246 is competitive with its nearest rivals.

At 1080p with Low settings, the combo achieves 304.1 FPS, which suggests the CPU is not a bottleneck at this resolution. However, the CPU's 3dmark 16-thread score of 7585 and max-thread score of 7590 indicate that it is well-matched to the GPU's capabilities. The CPU's 89.6 GB/s memory bandwidth and DDR5 support also help ensure that data can be fed to the GPU efficiently. Overall, the Ryzen 5 9600X is a capable partner for the RTX 4070 Ti, providing sufficient processing power to avoid limiting frame rates in most scenarios.