Fivem

This combo, pairing the AMD Ryzen 5 5500 with the AMD Radeon RX 7800 XT, lands at rank 673 out of 1792 tested combinations in Fivem. That places it in the 62nd percentile of all tested systems, meaning it outperforms a solid majority of configurations while sitting below the top tier. The ranking is respectable for a mid-range pairing, but the data suggests the ceiling here is defined by the CPU rather than the GPU. The Ryzen 5 5500 holds a 79th percentile ranking among all CPUs, while the RX 7800 XT sits at a 76th percentile among all GPUs. Neither component is a flagship, but the combination is balanced enough to deliver smooth multiplayer performance at most settings, with the CPU becoming the bottleneck at lower resolutions and the GPU taking over at 4K.

How This Combo Ranks

The 673rd position out of 1792 tested combos places this system in the upper-middle tier of the database. It is not a top-100 contender, but it is far from a weak performer. The ranking reflects a pairing where both components are capable, yet neither pushes the other to extreme heights. The Ryzen 5 5500’s 79th percentile among CPUs is slightly higher than the GPU’s 76th percentile, suggesting the processor has a marginal edge in relative strength. That said, the measured FPS results show the GPU can still be the limiting factor at 4K Ultra, where the frame rate drops to 39 FPS. The overall rank is a product of this balance — strong enough to handle high-refresh 1080p gaming, but not enough to dominate at 4K. The data indicates that this combo is best suited for 1440p gameplay, where it achieves over 99 FPS on High settings.

GPU Role

The Radeon RX 7800 XT features 16 GB of GDDR6 memory on a 256-bit bus, delivering a bandwidth of 624.1 GB/s. Its boost clock reaches 2430 MHz, with a game clock of 2124 MHz and a base clock of 1295 MHz. The 3840 shading units and 96 ROPs handle pixel throughput at 233.3 GPixel/s, while texture rate sits at 583.2 GTexel/s. In Fivem, the GPU’s role becomes clear at higher resolutions. At 4K High, the combo produces 54.3 FPS, which drops to 39 FPS at Ultra. This is a GPU-bound scenario — the 16 GB frame buffer is sufficient, but the raw compute power at 37.32 TFLOPS FP32 is stretched thin at 4K. The 3DMark Steel Nomad DX12 score of 4157 reinforces that this is a mid-high tier GPU, not a 4K powerhouse. At 1080p, however, the GPU is not the constraint, as frame rates exceed 230 FPS on Low settings, indicating the CPU becomes the primary limiter.

CPU Role

The Ryzen 5 5500 brings 6 cores and 12 threads based on Zen 3 architecture, with a base clock of 3.60 GHz and a boost clock of 4.20 GHz. Its 16 MB L3 cache and 65 W TDP make it a efficient desktop part, but the 3DMark single-thread score of 836 and Cinebench R23 single-core score of 2319 reveal its limitations in lightly-threaded workloads. Fivem is a multiplayer title that often relies on a few cores for simulation and networking, which puts pressure on single-thread performance. The data shows this at 1080p Low, where the combo hits 233 FPS — a number that, while high, is limited by the CPU’s ability to feed frames to the GPU. The PassMark multithread score of 19330 is solid for 6 cores, but the single-thread score of 3058 is where the bottleneck emerges. Compared to its nearest rival, the Intel Core i5-12500, the Ryzen 5 5500 is essentially tied with a deltaPct of -0.1%, meaning the 12500 is 0.1% faster on average. This parity explains why the CPU can’t push much beyond 233 FPS in Fivem, regardless of GPU headroom.

Measured FPS Breakdown

At 1080p, the combo delivers 233 FPS on Low, 182.3 FPS on Medium, 149.6 FPS on High, and 114.2 FPS on Ultra. These numbers show a clear scaling pattern where each settings tier reduces performance by roughly 20-30%. At 1440p, the results are 151.1 FPS on Low, 123.2 FPS on Medium, 99.1 FPS on High, and 72.3 FPS on Ultra. The drop from 1080p to 1440p is significant but expected — the GPU is starting to take on more load. At 4K, the frame rates fall to 87.8 FPS on Low, 64.5 FPS on Medium, 54.3 FPS on High, and 39 FPS on Ultra. The 4K Ultra result is the only one that dips below 40 FPS, making it the only configuration that struggles to maintain playability. The data shows a consistent pattern: Low settings at any resolution are playable, High settings are smooth up to 1440p, and Ultra is only viable at 1080p.

Resolution Scaling

Moving from 1080p to 4K, the FPS drops by 62.3% on Low settings (from 233 to 87.8 FPS), 64.6% on Medium (from 182.3 to 64.5 FPS), 63.7% on High (from 149.6 to 54.3 FPS), and 65.8% on Ultra (from 114.2 to 39 FPS). The percentage drops are remarkably consistent across settings, hovering around 62-66%. This uniformity suggests that the scaling is primarily resolution-driven rather than settings-driven, meaning the GPU is becoming the limiting factor at 4K across all quality levels. At 1080p, the CPU is the bottleneck, as evidenced by the 233 FPS ceiling on Low — the GPU could likely render more frames, but the processor can’t keep up. At 4K, the GPU’s workload increases quadratically with pixel count, and the RX 7800 XT’s compute power is insufficient to maintain high frame rates. The scaling analysis indicates that 1440p is the sweet spot for this combo, where neither component is fully saturated and the balance yields playable frame rates at High settings.

FAQ

Q: Is this combo better suited for 1080p or 1440p gaming in Fivem?

A: Based on the measured FPS, 1440p High at 99.1 FPS offers a better balance than 1080p Ultra at 114.2 FPS. The 1440p result provides higher resolution with only a 15 FPS penalty, making it the more visually efficient choice.

Q: Can this system handle 4K Ultra settings in Fivem?

A: No, the 4K Ultra result of 39 FPS is below the 60 FPS threshold for smooth gameplay. The GPU is the limiting factor here, as the RX 7800 XT’s compute power is insufficient for that resolution and settings combination.

Q: Which component is the primary bottleneck at 1080p Low?

A: The CPU is the bottleneck at 1080p Low. The 233 FPS result is likely capped by the Ryzen 5 5500’s single-thread performance (3DMark single-thread score of 836), as the GPU has ample headroom at that resolution.

Q: How does the Ryzen 5 5500 compare to its closest rival in overall CPU performance?

A: The Ryzen 5 5500 is virtually tied with the Intel Core i5-12500, showing a deltaPct of -0.1% (meaning the i5-12500 is 0.1% faster). This negligible difference confirms the CPU is a mid-range part, not a performance outlier.

Q: What is the highest FPS achievable with this combo in Fivem?

A: The highest measured FPS is 233 at 1080p Low settings. This is the peak frame rate recorded in the data, and it is CPU-limited rather than GPU-limited.

Q: Does the RX 7800 XT’s 16 GB VRAM ever become a limitation in Fivem?

A: No, the VRAM capacity is not a limiting factor in any measured scenario. The 16 GB frame buffer is more than sufficient for Fivem, as the performance drops at 4K are due to compute throughput, not memory capacity.

Settings Recommendations

For the best experience, 1440p High at 99.1 FPS is the recommended configuration. It delivers smooth multiplayer performance with good visual fidelity, and the frame rate is high enough to avoid noticeable stutter. If higher frame rates are preferred, 1080p Medium at 182.3 FPS offers a significant speed boost with only a minor resolution penalty. For players who prioritize visuals over speed, 1080p Ultra at 114.2 FPS is the highest quality setting that remains above 100 FPS. The 4K High setting at 54.3 FPS is borderline playable but not recommended for competitive play, while 4K Ultra at 39 FPS should be avoided. The data clearly shows that 1440p High strikes the optimal balance between performance and image quality for this combo, making it the default choice for most users.