Evolve

The AMD Ryzen 5 4600G paired with the NVIDIA GeForce RTX 3050 4 GB is a combination that sits in the lower quartile of tested configurations for Evolve, placing 1544th out of 1695 combos. The data shows a system that is consistently GPU-limited at higher resolutions, with the processor’s six cores and twelve threads proving sufficient to feed the graphics card at 1080p, but the 4 GB VRAM and modest memory bandwidth become the decisive bottlenecks as resolution climbs. Benchmark results indicate this pairing is best suited for 1080p gaming, where it delivers playable frame rates across most settings, but struggles to maintain acceptable performance at 4K.

Resolution Scaling

The measured FPS data reveals a steep performance cliff as resolution increases, which clearly identifies the GPU as the limiting component in this pairing. At 1920x1080 with Low settings, the system achieves 111.5 FPS, but this drops to 76.5 FPS at 2560x1440 and further to 41.6 FPS at 3840x2160. This represents a 63% reduction in frame rate from 1080p to 4K at Low settings, a scaling pattern that strongly indicates the RTX 3050 4 GB is saturated long before the Ryzen 5 4600G reaches its limits.

The scaling behavior becomes even more pronounced at higher quality presets. With High settings, the frame rate falls from 66.6 FPS at 1080p to 47.1 FPS at 1440p (a 29% drop) and then to 28.5 FPS at 4K (a 57% drop from 1440p). The Ultra preset shows the most dramatic collapse: 49.8 FPS at 1080p, 34.4 FPS at 1440p, and just 15.9 FPS at 4K. These numbers demonstrate that the 4 GB VRAM buffer and 192.0 GB/s memory bandwidth of the RTX 3050 4 GB cannot sustain the texture and shading workloads demanded by Evolve at higher resolutions, particularly when the Ultra preset is enabled.

The fact that the CPU’s performance headroom remains untapped is evident from the 1080p results, where the system scales almost linearly with GPU workload. The Ryzen 5 4600G’s 3.70 GHz base and 4.20 GHz boost clocks, combined with its Zen 2 architecture, provide enough single-thread throughput to avoid becoming a bottleneck at 1080p, but the GPU’s 7.127 TFLOPS FP32 performance and 55.68 GPixel/s pixel rate are simply insufficient for 4K rendering in this title.

Settings Recommendations

The measured data indicates that the Medium preset at 1920x1080 offers the best balance of visual quality and performance for this combination, delivering 86.5 FPS. This is comfortably above the 60 FPS threshold and represents a 30% improvement over the High preset’s 66.6 FPS, while the visual difference between Medium and High in Evolve is typically less significant than the frame rate gap suggests. For users prioritizing smoothness over fidelity, the Low preset at 1080p provides 111.5 FPS, which is the highest frame rate recorded across all tested configurations.

At 2560x1440, the Medium preset drops to 58.4 FPS, which is playable but may exhibit occasional stutter on 60 Hz displays. The High preset at 1440p produces 47.1 FPS, which is below the ideal smoothness threshold, while Low at 1440p achieves 76.5 FPS and remains a viable option for competitive play. The Ultra preset is not recommended at any resolution, as it yields only 49.8 FPS at 1080p and falls to 34.4 FPS at 1440p, with the 4K Ultra result of 15.9 FPS being effectively unplayable.

For 4K resolution, the data shows that only the Low preset (41.6 FPS) approaches playability, while Medium (32.2 FPS) and High (28.5 FPS) fall below acceptable thresholds. Given these measurements, the optimal experience is clearly at 1080p with Medium or High settings, where the system delivers between 66.6 and 86.5 FPS, providing a responsive and visually appealing experience without overwhelming the 4 GB VRAM capacity.

How This Combo Ranks

The combination of the AMD Ryzen 5 4600G and NVIDIA GeForce RTX 3050 4 GB ranks 1544th out of 1695 tested combos in Evolve, placing it in the bottom 9% of all configurations. This low ranking reflects the GPU’s 50th percentile standing among all GPUs, which is a middling position, but the 4 GB VRAM capacity and the game’s release date in 2015 mean that Evolve’s rendering demands are not particularly well-suited to this modern budget card. The CPU’s 75th percentile ranking among all processors suggests that the processor is not the limiting factor; rather, the GPU’s constrained memory subsystem and pixel throughput hold back the overall result.

When compared to other tested combos, this pairing’s 1080p performance is competitive with what might be expected from a GPU in the 50th percentile, but the 4K results are disproportionately poor. The rank of 1544 out of 1695 indicates that the majority of tested configurations outperform this combo, even at 1080p, which suggests that the RTX 3050 4 GB is a weak partner for the Ryzen 5 4600G in this title. The data implies that users with this CPU would achieve better overall rankings by pairing it with a GPU that has more VRAM and higher memory bandwidth.

Measured FPS Breakdown

At 1920x1080, the system produces 111.5 FPS on Low, 86.5 FPS on Medium, 66.6 FPS on High, and 49.8 FPS on Ultra. These results show a clear progression of performance degradation as image quality increases, with the Ultra preset costing 61.5 FPS compared to Low. The 1080p results are the only resolution where all presets exceed 45 FPS, making it the only viable option for a smooth experience across the board.

At 2560x1440, the measured averages are 76.5 FPS on Low, 58.4 FPS on Medium, 47.1 FPS on High, and 34.4 FPS on Ultra. The jump from 1080p to 1440p reduces performance by an average of 31 across all presets, with the Low preset losing 35 FPS and the Ultra preset losing 15.4 FPS. This resolution is playable on Low and Medium, but High and Ultra fall below the 60 FPS threshold.

At 3840x2160, the results are 41.6 FPS on Low, 32.2 FPS on Medium, 28.5 FPS on High, and 15.9 FPS on Ultra. The 4K resolution causes a dramatic performance collapse, with even the Low preset failing to reach 45 FPS. The Ultra preset at 4K produces just 15.9 FPS, which is a 68% reduction from the same preset at 1080p, underscoring the GPU’s inability to handle the pixel count and texture memory requirements of 4K rendering.

FAQ

Q: What is the best resolution for this combo in Evolve?

A: The measured data shows that 1920x1080 is the only resolution where all presets exceed 45 FPS, with Low achieving 111.5 FPS and Medium achieving 86.5 FPS, making it the recommended resolution for this pairing.

Q: Can this combo handle 4K gaming in Evolve?

A: At 3840x2160, even the Low preset only reaches 41.6 FPS, while Ultra falls to 15.9 FPS, indicating that 4K is not a viable option for smooth gameplay with this hardware.

Q: How does the Ultra preset compare to High at 1080p?

A: At 1920x1080, Ultra delivers 49.8 FPS compared to High’s 66.6 FPS, a 16.8 FPS reduction that likely outweighs the visual benefits of Ultra settings for most users.

Q: Is the CPU or GPU the bottleneck in this system?

A: Benchmark results indicate the GPU is the limiting factor, as the Ryzen 5 4600G ranks in the 75th percentile of CPUs while the RTX 3050 4 GB sits at the 50th percentile, and frame rates scale sharply with resolution.

Q: What settings should I use for 1440p gaming?

A: At 2560x1440, the Low preset offers 76.5 FPS and Medium offers 58.4 FPS, both of which are playable, while High (47.1 FPS) and Ultra (34.4 FPS) are below ideal smoothness thresholds.

Q: How does this combo rank compared to other tested configurations?

A: This pairing ranks 1544th out of 1695 tested combos in Evolve, placing it in the bottom 9% of all configurations, reflecting the GPU’s limited memory bandwidth and VRAM capacity.

CPU Role

The AMD Ryzen 5 4600G brings six cores and twelve threads based on the Zen 2 architecture, with a base clock of 3.70 GHz and a boost clock of 4.20 GHz. These specifications, combined with 8 MB of shared L3 cache, provide ample processing headroom for Evolve, which was released in 2015 and does not heavily utilize multi-threaded workloads. The CPU’s 75th percentile ranking among all processors, with an average benchmark score of 17489, confirms that it performs well above average in synthetic tests, yet the measured game FPS does not reflect this strength, indicating that the CPU is not the primary constraint.

The 4000-series processor’s performance in single-threaded workloads, as evidenced by a Geekbench single-core score of 1575 and a Cinebench R23 single-core score of 1919, is sufficient to keep up with the GPU’s demands at 1080p. At 4K, the CPU’s role diminishes further, as the GPU becomes entirely saturated, and the data shows no indication of CPU-bound frame rate ceilings. The 12 threads and dual-channel DDR4 memory support with 51.2 GB/s bandwidth are more than adequate for Evolve’s threading model, which primarily relies on a few high-frequency cores.

GPU Role

The NVIDIA GeForce RTX 3050 4 GB is built on the Ampere architecture with 2048 shading units, 64 TMUs, and 32 ROPs, operating at base and boost clocks of 1545 MHz and 1740 MHz respectively. The GPU’s 4 GB of GDDR6 memory on a 128-bit bus provides 192.0 GB/s of bandwidth, which is the critical weakness in this pairing. Evolve’s texture-heavy environments and particle effects require substantial memory throughput, and the data shows that this bandwidth is exhausted at 1440p and above, causing the dramatic FPS drops observed in the measured results.

The GPU’s 7.127 TFLOPS FP32 performance and 55.68 GPixel/s pixel rate are respectable for a 90 W card, but the 4 GB VRAM capacity is the limiting factor. At 1080p, the GPU can maintain 86.5 FPS on Medium and 66.6 FPS on High, but at 4K, the same presets drop to 32.2 FPS and 28.5 FPS respectively. The 50th percentile ranking among all GPUs, with the card’s end-of-life production status, positions it as a mid-range option that is outclassed by newer or higher-tier alternatives in this title. The 128-bit memory interface and 4 GB capacity are insufficient for Evolve’s maximum settings at high resolutions, making the GPU the clear bottleneck in this configuration.