Doom
This combination provides smooth gameplay with an average of 73 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 30 | 36 | 41 | 49 |
| 1440p QHD | 52 | 67 | 74 | 91 |
| 1080p Full HD | 84 | 98 | 119 | 135 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Doom with AMD Ryzen 5 4600G + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis
The AMD Ryzen 5 4600G paired with the NVIDIA GeForce RTX 3050 4 GB delivers a highly playable experience in Doom, though the data indicates that the GPU’s 4 GB VRAM and the CPU’s Zen 2 architecture create a distinct performance ceiling at higher resolutions. The benchmark results show a configuration that is well-suited for 1080p gaming, but struggles to maintain smooth frame rates at 4K, making it a classic example of a mid-range pairing that excels at its intended resolution.
Settings Recommendations
The measured frame rates across all four quality presets—Low, Medium, High, and Ultra—reveal a clear hierarchy that favors the High preset as the optimal balance of visual fidelity and performance. At 1920x1080, the High preset achieves an average of 97.9 FPS, which is comfortably above the 60 FPS threshold for smooth gameplay. This is a significant improvement over the Ultra preset, which drops to 84.1 FPS, while still offering a substantial visual upgrade over the Medium preset’s 119 FPS. The data suggests that the High preset is the sweet spot, as it provides the most visually rich experience without sacrificing the frame rate headroom needed for fast-paced action.
For users with 1440p monitors, the High preset remains the recommended choice, delivering an average of 66.6 FPS. This is just above the playable threshold, though it is noticeably lower than the 1080p result. The Medium preset at 1440p offers 73.9 FPS, which is smoother, but the drop in visual quality may not be worth the marginal gain in performance for most players. The Ultra preset at 1440p falls to 51.9 FPS, which is below the ideal playable range, making it less suitable for competitive play. At 4K, no preset achieves a fully smooth experience; the Low preset comes closest with 48.6 FPS, but the High preset’s 36 FPS is too low for consistent playability. Therefore, the High preset is the definitive recommendation for 1080p and a viable option for 1440p, while 4K users should expect to compromise heavily on settings.
How This Combo Ranks
The data places this specific combination at rank 1507 out of 1681 tested combos in Doom, which puts it in the lower tier of all possible configurations. This ranking reflects the hardware’s position in the broader ecosystem, where the Ryzen 5 4600G’s processor performance is a limiting factor. The CPU’s benchmark scores show it sits at the 75th percentile among all CPUs, with an average benchmark score of 17489. Its nearest rivals include the AMD Ryzen 3 PRO 5355GE, which scores 17482 with a delta of 0%, and the Intel Core i5-12450H, which scores 17475 with a delta of 0.1%. This indicates that the CPU is competitive with other mid-range parts, but it does not have the raw processing power to push higher frame rates in CPU-bound scenarios.
The rank of 1507 out of 1681 suggests that while the combo is functional, it is outclassed by a significant majority of other pairings. This is likely due to the combination of the CPU’s moderate multi-threaded performance (Cinebench R23 multicore score of 13593) and the GPU’s limited 4 GB VRAM, which becomes a bottleneck at higher resolutions. In comparison to the CPU’s nearest rivals, the performance delta is minimal, meaning the 4600G is not the primary issue; rather, the pairing with the RTX 3050 4 GB holds the system back. The data implies that users with this combo are getting a baseline experience that is adequate for 1080p, but the low rank serves as a warning for those expecting high-end performance.
GPU Role
The NVIDIA GeForce RTX 3050 4 GB plays a crucial role in this configuration, and its specifications directly explain the observed performance patterns. The GPU features 4 GB of GDDR6 memory on a 128-bit bus, providing a memory bandwidth of 192.0 GB/s. This is a relatively modest memory configuration, and the data indicates that it becomes a limiting factor at 4K resolution, where the average FPS drops to 36 on High settings. The GPU’s base clock is 1545 MHz with a boost clock of 1740 MHz, and it contains 2048 shading units, 64 texture mapping units, and 32 raster output units. These specs allow for a peak FP32 performance of 7.127 TFLOPS, which is adequate for 1080p gaming but insufficient for demanding 4K workloads.
The GPU’s memory size of 4 GB is the most significant constraint. At 1920x1080, the frame rates are strong, ranging from 135.3 FPS on Low to 84.1 FPS on Ultra, indicating that the GPU has enough memory bandwidth for this resolution. However, at 3840x2160, the average FPS for all presets falls below 50, with the Ultra preset dropping to 30.3 FPS. This sharp decline suggests that the GPU is running out of memory, forcing the system to rely on slower fallback methods. The GPU’s 128-bit memory bus and 192.0 GB/s bandwidth are not sufficient for the larger texture data required at 4K, making the RTX 3050 4 GB a clear bottleneck at this resolution. The data shows that the GPU is well-matched to the CPU at 1080p, but its memory limitations are exposed as resolution increases.
Measured FPS Breakdown
The measured FPS data provides a comprehensive look at the combo’s performance across three resolutions and four settings presets. At 1920x1080, the results are consistently strong: the Low preset achieves an average of 135.3 FPS, the Medium preset hits 119 FPS, the High preset delivers 97.9 FPS, and the Ultra preset manages 84.1 FPS. This shows a smooth scaling curve, where each step up in quality costs roughly 15-20 FPS. The 1080p results are the most playable, with even the Ultra preset staying well above the 60 FPS threshold, making this resolution the clear target for this hardware.
Moving to 2560x1440, the frame rates drop significantly but remain mostly playable. The Low preset achieves 90.9 FPS, which is still excellent, while the Medium preset delivers 73.9 FPS. The High preset falls to 66.6 FPS, which is just above the playable threshold, and the Ultra preset drops to 51.9 FPS, which is below it. The data reveals a performance penalty of roughly 30-40% when moving from 1080p to 1440p, which is expected given the increased pixel count. At 3840x2160, the results are universally below the playable threshold: the Low preset averages 48.6 FPS, the Medium preset hits 41.4 FPS, the High preset manages 36 FPS, and the Ultra preset falls to 30.3 FPS. These numbers indicate that 4K is not a viable option for this combo, as even the lowest settings cannot maintain a consistent 60 FPS.
Resolution Scaling
The scaling of frame rates from 1080p to 4K provides critical insight into the system’s limiting components. When moving from 1920x1080 to 2560x1440, the average FPS across all settings drops by approximately 30-35%. For example, the High preset falls from 97.9 FPS at 1080p to 66.6 FPS at 1440p, a reduction of 31.3 FPS. This is a typical scaling pattern for a GPU-bound scenario, where the increased resolution demands more pixel processing. The CPU, with its 6 cores and 12 threads, is able to keep up with this load, as evidenced by the fact that the frame rate drops are proportional to the resolution increase.
However, the jump from 1440p to 4K reveals a more severe bottleneck. The High preset drops from 66.6 FPS at 1440p to 36 FPS at 4K, a reduction of 30.6 FPS, which is a 46% decrease. This non-linear drop indicates that the GPU’s 4 GB VRAM is being exhausted at 4K, causing a significant performance collapse. The Low preset shows a similar trend, falling from 90.9 FPS at 1440p to 48.6 FPS at 4K, a 46.5% decrease. This pattern suggests that the RTX 3050 4 GB is the primary limiting factor at 4K, as the CPU’s performance is not degrading at the same rate. The data clearly shows that the system is balanced at 1080p, slightly CPU-limited at 1440p, and heavily GPU-limited at 4K, where the memory capacity becomes an insurmountable obstacle.
Hardware Specifications
AMD Ryzen 5 4600G
NVIDIA GeForce RTX 3050 4 GB
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 4600G + NVIDIA GeForce RTX 3050 4 GB in Doom
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 48.6 |
| 3840x2160 | Medium | 41.4 |
| 3840x2160 | High | 36.0 |
| 3840x2160 | Ultra | 30.3 |
| 2560x1440 | Low | 90.9 |
| 2560x1440 | Medium | 73.9 |
| 2560x1440 | High | 66.6 |
| 2560x1440 | Ultra | 51.9 |
| 1920x1080 | Low | 135.3 |
| 1920x1080 | Medium | 119.0 |
| 1920x1080 | High | 97.9 |
| 1920x1080 | Ultra | 84.1 |
Doom with RTX 3050 4 GB + Other CPUs
See how Doom performs with the same GPU but different processors.
Other Games with Ryzen 5 4600G + RTX 3050 4 GB
Explore FPS benchmarks for other games using this same hardware combination.