Downfall

The AMD Ryzen 7 5800X paired with the NVIDIA GeForce GTX 1070 delivers a decidedly mid-pack experience in Downfall, ranking 1449th out of 1741 tested combos. This places the pairing in the bottom 17% of all configurations, a position driven almost entirely by the GPU's age and performance ceiling rather than any CPU limitation. The benchmark data shows a system that can handle the game at 1080p with high framerates, but which struggles to maintain playable performance at 4K with maximum settings.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 7 5800X is a Zen 3 architecture processor built on a 7 nm process at TSMC, featuring 8 cores and 16 threads. Its base clock of 3.80 GHz boosts up to 4.70 GHz, and it carries 32 MB of L3 cache alongside 512 KB of L2 per core. The processor's 105 W TDP and dual-channel DDR4 memory support with 51.2 GB/s bandwidth are typical for a desktop part of this generation. The CPU's benchmark scores reflect a strong processor: it achieves a Cinebench R23 multicore score of 23571 and a single-core score of 3327, with a Geekbench multicore score of 10220.

Despite this CPU strength, the measured FPS in Downfall reveals that the processor is rarely the bottleneck. At 1080p with Low settings, the combo reaches 158.2 FPS, and at 1440p Low it maintains 114.9 FPS. The CPU's 84th percentile ranking among all CPUs and its passmark multithread score of 27732 indicate it has ample headroom for this horror title. The processor's 3DMark scores — 7586 for 16 threads and 943 for single-thread — show strong scaling across core counts, which matters little in a game like Downfall that appears to favor GPU throughput. The 5800X's nearest rival, the AMD Ryzen 7 5800, scores 27535 on average, a delta of only 0.3%, confirming that this CPU generation is mature and consistent.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combo's rank of 1449 out of 1741 places it in the lower quarter of all tested pairings for Downfall. This is a poor showing that reflects the GPU's age: the GTX 1070 sits in the 51st percentile of all GPUs, which is essentially the median, but when paired with a top-tier CPU, the combination underperforms relative to what the processor alone could achieve. The data suggests that many other combos with weaker CPUs but stronger GPUs would outperform this setup in this specific game.

The delta between the GTX 1070 and its nearest rivals is telling. The GPU's average benchmark score is 12331, which is 0.7% higher than the NVIDIA Quadro K4200 (12241) and 1.3% lower than the GeForce GTX 880M (12490). More relevantly, it trails the GTX 1650 SUPER by 1.4% (12504). These small percentage differences indicate that the GTX 1070 is not dramatically slower than its direct competitors, but none of these cards are modern high-end parts. The 5800X, by contrast, outperforms its nearest rival by 0.3% (the Ryzen 7 5800 at 27535), showing the CPU is not the limiting factor.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The resolution scaling data clearly demonstrates that the GTX 1070 is the bottleneck in this pairing. Moving from 1080p to 1440p at Ultra settings drops average FPS from 67.2 to 44.7, a reduction of 22.5 FPS or approximately 33%. The drop from 1440p to 4K at Ultra is even steeper: from 44.7 to 30.8, a 31% reduction. This non-linear scaling is characteristic of a GPU that runs out of pixel throughput and memory bandwidth as resolution increases.

At Low settings, the pattern persists but with higher absolute numbers: 158.2 FPS at 1080p, 114.9 at 1440p, and 69.4 at 4K. The 4K Low result is still above 60 FPS, which suggests that even at minimum settings, the GPU is doing significant work. The GTX 1070's 8 GB of GDDR5 memory on a 256-bit bus with 256.3 GB/s bandwidth is sufficient for 1080p, but the data shows that at 4K, the card's 6.463 TFLOPS of FP32 performance is not enough to maintain high framerates at higher quality presets. If the CPU were the limiting factor, we would expect to see smaller FPS differences between 1440p and 4K, but the steep drops point squarely at the GPU.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

At 1080p, the combo performs admirably across all settings. Low delivers 158.2 FPS, Medium drops to 126.6, High reaches 106.1, and Ultra falls to 67.2. These numbers indicate that 1080p gaming is very viable, with even Ultra staying above 60 FPS. The gap between Low and Ultra is 91 FPS, showing that settings have a massive impact at this resolution.

At 1440p, the framerates remain playable but the Ultra preset starts to struggle. Low produces 114.9 FPS, Medium yields 92.2, High manages 76.7, and Ultra drops to 44.7. The 1440p Ultra result is below the 60 FPS threshold, which is a significant finding for users with 1440p monitors. The drop from High to Ultra at this resolution is 32 FPS, indicating that the Ultra preset imposes a heavy load.

At 4K, the situation becomes challenging. Low achieves 69.4 FPS, Medium drops to 57.1, High falls to 46.9, and Ultra bottoms out at 30.8. Only the Low preset at 4K crosses the 60 FPS line. The 4K results show a clear pattern: the GTX 1070 cannot handle high-quality settings at this resolution. The difference between 4K Low and 4K Ultra is 38.6 FPS, which is the largest absolute spread across all resolutions, underscoring how much the Ultra preset taxes the GPU.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce GTX 1070 is a Pascal architecture GPU built on a 16 nm process, with 7,200 million transistors on a 314 mm² die. Its base clock of 1506 MHz boosts to 1683 MHz, and the memory runs at 2002 MHz (8 Gbps effective). The card has 1920 shading units, 120 TMUs, and 64 ROPs, with a pixel rate of 107.7 GPixel/s and a texture rate of 202.0 GTexel/s. The 8 GB of GDDR5 memory on a 256-bit bus provides 256.3 GB/s of bandwidth.

The GPU's benchmark scores show it is a mid-range part. Its 3DMark Steel Nomad DX12 score is 1082, and its Passmark G3D score is 13498. The GPU's 51st percentile ranking among all GPUs confirms its position as an average performer. In Downfall, the GTX 1070's 64 ROPs and 107.7 GPixel/s pixel rate are likely the limiting factors at high resolutions, as the game appears to be fill-rate intensive. The card's 150 W TDP and dual-slot design are typical for its era, and its PCIe 3.0 x16 interface is adequate for this workload. The GPU's closest competitor, the GTX 1650 SUPER, scores 12504 on average, just 1.4% higher, but neither card is designed for 4K Ultra gaming.

Settings Recommendations — which preset gives the best experience per the measured rows

For 1080p users, the High preset at 106.1 FPS offers the best balance of visual quality and performance, as it remains well above 60 FPS while providing better visuals than Medium. The Ultra preset at 67.2 FPS is also playable, but the 39 FPS drop from High to Ultra is substantial for what is likely a marginal visual improvement. For 1440p, the High preset at 76.7 FPS is the recommended choice, as it stays above 60 FPS while the Ultra preset falls to 44.7 FPS, which is not ideal for a horror game where smooth motion matters. At 4K, the Low preset at 69.4 FPS is the only viable option for 60 FPS gaming. The Medium preset at 57.1 FPS is borderline, and the High preset at 46.9 FPS and Ultra at 30.8 FPS are not recommended for a playable experience.

The data shows that the GTX 1070's sweet spot is 1080p High or 1440p High. Users with 4K displays should stick to Low settings or consider upgrading the GPU, as the 5800X has plenty of headroom. The 4K Ultra result of 30.8 FPS is particularly poor, and the 4K Medium result of 57.1 FPS is just below the 60 FPS target. Overall, High settings at 1080p or 1440p provide the most consistent experience without sacrificing too much visual fidelity.

FAQ

*Q: What is the best resolution for this combo in Downfall?*

A: The data shows 1080p delivers the most consistent performance, with all presets above 60 FPS. At 1440p, only Low, Medium, and High presets exceed 60 FPS, while 4K only achieves 60+ FPS on Low settings (69.4 FPS).

*Q: Can this combo handle 4K gaming in Downfall?*

A: Only at Low settings, where it achieves 69.4 FPS. Medium drops to 57.1 FPS, High falls to 46.9 FPS, and Ultra bottoms out at 30.8 FPS. For 60 FPS gaming at 4K, the Low preset is the only option.

Q: Is the CPU or GPU the bottleneck in this pairing?

A: The GPU is clearly the limiting factor. The Ryzen 7 5800X ranks in the 84th percentile of CPUs, while the GTX 1070 sits in the 51st percentile. The steep FPS drops from 1080p to 4K indicate pixel throughput limitations, not CPU constraints.

Q: How does the GTX 1070 compare to its nearest rivals in this game?

A: The GTX 1070's average benchmark score of 12331 is 0.7% higher than the Quadro K4200 (12241) and 1.4% lower than the GTX 1650 SUPER (12504). These small differences mean performance in Downfall is similar across these cards.

Q: What is the recommended settings preset for 1440p?

A: The High preset at 76.7 FPS is the best choice for 1440p, as it stays above 60 FPS. The Ultra preset drops to 44.7 FPS, which is below the playable threshold for smooth gameplay.

*Q: Does the Ryzen 7 5800X's 8-core design help in Downfall?*

A: The CPU's 8 cores and 16 threads provide ample processing power, but the benchmark data suggests the game is GPU-bound. The 5800X's Cinebench R23 multicore score of 23571 and 3DMark 16-thread score of 7586 show it is not a limiting factor in this title.