Archeage
This combination offers playable performance with an average of 53 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 18 | 25 | 36 | 44 |
| 1440p QHD | 31 | 41 | 65 | 69 |
| 1080p Full HD | 45 | 65 | 94 | 108 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 7 5800X + NVIDIA GeForce GTX 1070, In-Depth Analysis
The AMD Ryzen 7 5800X paired with the NVIDIA GeForce GTX 1070 occupies the 1,440th position out of 1,727 tested combinations for Archeage. This placement places the combo in the lower 17% of all tested systems, indicating that while the hardware is functional, it is not positioned to deliver a high-end experience in this specific MMORPG. The CPU is a strong performer in general workloads, with its average benchmark score of 27,606 placing it in the 84th percentile of all CPUs, but the GPU’s average score of 12,331 sits in the 51st percentile of all GPUs. The pairing highlights a significant imbalance where the processor’s capability far outpaces the graphics card’s output, directly impacting the game’s frame rates.
How This Combo Ranks
The ranking of 1,440 out of 1,727 is a clear signal that this configuration is not optimized for Archeage’s demands. Benchmark results show that the CPU is a top-tier part for its generation, with a Cinebench R23 multi-core score of 23,571 and a single-core score of 3,327. However, the GPU’s Passmark G3D score of 13,498 is modest, and its percentile ranking of 51 means it performs better than only about half of all GPUs. The data suggests that the frame rates in Archeage are largely constrained by the GTX 1070, as the CPU’s headroom is not being fully utilized. Compared to its nearest CPU rivals, the Ryzen 7 5800X holds its own, with a delta of 0.3% against the Ryzen 7 5800 and -0.4% against both the Ryzen 5 8500GE and Intel Core i7-13700H. On the GPU side, the GTX 1070 is just 0.7% ahead of the Quadro K4200 and 1.3% behind the GeForce GTX 880M, showing that its performance is tightly clustered with older or lower-tier parts.
GPU Role
The NVIDIA GeForce GTX 1070 is the primary bottleneck in this combo for Archeage. The GPU features 8 GB of GDDR5 memory on a 256-bit bus, yielding a bandwidth of 256.3 GB/s. Its base clock is 1506 MHz with a boost of 1683 MHz, and it operates with a 150 W TDP. The card’s pixel rate is 107.7 GPixel/s and its texture rate is 202.0 GTexel/s, with a raw FP32 performance of 6.463 TFLOPS. These specifications are adequate for 1080p gaming but struggle at higher resolutions in a demanding MMORPG environment. The measured FPS data confirms this: at 1080p with High settings, the combo achieves 64.6 FPS, but this drops to 41.2 FPS at 1440p and 25.3 FPS at 4K with the same settings. The GPU’s memory capacity of 8 GB is sufficient for the game’s textures, but the processing power is insufficient to maintain high frame rates when the resolution increases, as evidenced by the sharp decline in performance.
Resolution Scaling
The frame rate scaling from 1080p to 4K reveals a GPU-bound scenario. At 1080p Low settings, the combo delivers 107.5 FPS, which is a playable frame rate for most users. Moving to 1440p Low, the average FPS drops to 69.1, a reduction of approximately 35.7%. At 4K Low, the average FPS falls to 43.5, which is a further 37.0% drop from 1440p. This pattern is consistent across all settings: the average FPS at 4K is roughly one-third of the 1080p performance. For instance, at High settings, the 1080p score of 64.6 FPS falls to 41.2 at 1440p and then to 25.3 at 4K. The data indicates that the GTX 1070’s compute resources are saturated as pixel count increases, while the Ryzen 7 5800X has ample headroom, as its multi-threaded performance in Cinebench R23 (23,571 points) suggests it can handle the game’s CPU load without issue. The limiting factor is clearly the GPU’s ability to fill frames, not the CPU’s ability to process game logic.
FAQ
Q: What is the highest average frame rate this combo can achieve in Archeage?
A: The highest measured average FPS is 107.5, achieved at 1920x1080 resolution with Low settings.
Q: How does the combo perform at 4K resolution?
A: At 3840x2160, the average FPS ranges from 18.2 on Ultra settings to 43.5 on Low settings. The middle ground is 36.0 FPS on Medium and 25.3 FPS on High.
Q: Is the CPU or GPU the limiting factor in this configuration?
A: The data shows the GPU is the primary bottleneck. The CPU has a high average benchmark score of 27,606 and sits in the 84th percentile, while the GPU’s average score of 12,331 is in the 51st percentile. The frame rate drops are consistent with GPU saturation as resolution increases.
Q: What is the difference in performance between Low and Ultra settings at 1080p?
A: At 1920x1080, the average FPS on Low is 107.5, while on Ultra it drops to 45.3. This represents a significant performance cost for higher visual fidelity.
Q: How does the GTX 1070 compare to its nearest rivals in terms of GPU benchmark scores?
A: The GTX 1070 has an average benchmark score of 12,331. It is 0.7% ahead of the Quadro K4200 and 1.3% behind the GeForce GTX 880M. It also trails the GTX 1650 SUPER by 1.4%.
Q: What is the recommended resolution for a smooth experience based on the data?
A: For a frame rate above 60 FPS, the only settings that achieve this are 1080p Low (107.5 FPS) and 1080p Medium (94.4 FPS). At 1440p, only Low settings exceed 60 FPS with 69.1 FPS.
Settings Recommendations
Based on the measured FPS rows, the optimal experience balances visual quality with playable frame rates. For a smooth 60+ FPS experience, the only viable options are at 1920x1080 resolution. The data shows that 1080p Medium settings yield an average of 94.4 FPS, which is a substantial improvement over High settings at 64.6 FPS. This suggests that Medium is the "sweet spot" for this combo, as it provides a high frame rate while still offering better visual quality than Low. If the user prioritizes frame rate above all else, 1080p Low provides the highest measured average at 107.5 FPS.
For users with a 1440p monitor, the situation is more constrained. Only Low settings at 2560x1440 achieve an average above 60 FPS, with a score of 69.1 FPS. Medium settings at 1440p drop to 65.0 FPS, which is borderline playable, but High settings (41.2 FPS) and Ultra (31.1 FPS) are not recommended for consistent gameplay. At 4K, the performance is not suitable for competitive or fast-paced play, as even Low settings only reach 43.5 FPS. The Ultra preset at 4K is the worst performer, with just 18.2 FPS, making it unusable for most scenarios.
In summary, the best experience is achieved at 1080p with Medium settings, offering a high average FPS without sacrificing too much visual fidelity. For those who must use higher resolutions, dropping to Low settings is the only way to maintain a reasonable frame rate, but the drop in quality is significant. The hardware is capable of running the game, but the GPU’s age limits its ability to handle the demands of Archeage at higher resolutions or detail levels.
Hardware Specifications
AMD Ryzen 7 5800X
NVIDIA GeForce GTX 1070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5800X + NVIDIA GeForce GTX 1070 in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 43.5 |
| 3840x2160 | Medium | 36.0 |
| 3840x2160 | High | 25.3 |
| 3840x2160 | Ultra | 18.2 |
| 2560x1440 | Low | 69.1 |
| 2560x1440 | Medium | 65.0 |
| 2560x1440 | High | 41.2 |
| 2560x1440 | Ultra | 31.1 |
| 1920x1080 | Low | 107.5 |
| 1920x1080 | Medium | 94.4 |
| 1920x1080 | High | 64.6 |
| 1920x1080 | Ultra | 45.3 |
Archeage with GTX 1070 + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 7 5800X + GTX 1070
Explore FPS benchmarks for other games using this same hardware combination.