Downfall

The AMD Ryzen 7 5700X paired with the NVIDIA GeForce RTX 4070 Ti shows a clear performance hierarchy in Downfall, with the GPU becoming the primary bottleneck as resolution increases. At 1080p, the combination delivers exceptionally high frame rates, but the scaling to 4K reveals a significant drop that aligns with the rendering load shifting from the CPU to the GPU. This analysis examines the recorded data to understand how this specific combo behaves across resolutions, settings, and workloads.

Resolution Scaling

The measured FPS data shows a predictable decline as resolution increases, but the magnitude of the drop varies significantly by settings preset. At Low settings, the average FPS falls from 366 at 1080p to 262 at 1440p, a reduction of 104 FPS, and then to 163 at 4K, another 99 FPS drop. This steep decline at lower settings indicates that even with minimal graphical load, the RTX 4070 Ti's rendering capacity is the limiting factor, as the CPU has ample headroom.

At High settings, the scaling is more moderate but still substantial. The average goes from 246 at 1080p to 176 at 1440p, a 70 FPS drop, and then to 109 at 4K, a further 67 FPS decrease. The percentage reduction from 1080p to 4K at High settings is roughly 56%, meaning the 4K resolution demands more than double the GPU work per frame compared to 1080p. This pattern suggests that the RTX 4070 Ti, with its 12 GB of GDDR6X memory and 192-bit bus, is well-suited for 1440p gaming but begins to strain at 4K, especially with higher quality presets.

The Ultra preset shows the most severe scaling. At 1080p, the average is 154 FPS, which drops to 110 at 1440p and then plummets to 68 at 4K. The 4K Ultra result is less than half of the 1080p Ultra figure, indicating that the combination of high resolution and maximum settings pushes the GPU to its limits. The data implies that for this game, the RTX 4070 Ti is not a consistent 4K Ultra performer, but it handles 1440p Ultra with ease, maintaining an average above 100 FPS.

Interestingly, the Medium preset provides the only recorded minimum and maximum FPS values. At 1080p Medium, the range is 255 to 345 FPS with an average of 300. At 1440p Medium, the range tightens to 182 to 246 FPS with an average of 214. At 4K Medium, the range is 113 to 153 FPS with an average of 133. These numbers show that the variance between minimum and maximum frames stays relatively consistent, around 90 FPS at 1080p and 40 FPS at 4K, which suggests that frame pacing remains stable even as the average drops.

Settings Recommendations

Based on the measured rows, the Medium preset offers the most balanced experience across all resolutions. At 4K Medium, the average of 133 FPS is significantly higher than the 109 FPS at High and the 68 FPS at Ultra, while still providing a visual upgrade over Low. The recorded minimum of 113 FPS at 4K Medium ensures that even the slowest frames stay above 100 FPS, which is a comfortable threshold for smooth gameplay in a horror title.

For users prioritizing maximum visual fidelity, the High preset at 1440p is the sweet spot. The average of 176 FPS at 1440p High is more than sufficient for high-refresh-rate displays, and the jump to Ultra only adds 34 FPS at 1080p but costs 66 FPS at 1440p. The data shows that the Ultra preset at 1440p, with an average of 110 FPS, is still playable, but the diminishing returns in visual quality versus the performance hit make High the more efficient choice.

At 1080p, the Low preset delivers an extraordinary 366 FPS average, which is far beyond what most monitors can display. The Medium preset at 300 FPS is equally excessive, so users with standard 60 Hz or 144 Hz displays would see no practical benefit from these settings. Instead, the High preset at 246 FPS or even Ultra at 154 FPS provides a better use of the hardware, with the latter still exceeding the refresh rate of most gaming monitors.

The 4K Ultra setting, at 68 FPS average, is the only measured configuration that falls below the 100 FPS mark. This suggests that while the game is playable at this setting, the combination of the RTX 4070 Ti and Ryzen 7 5700X is not optimized for maximum settings at 4K. The Medium preset at 4K, with its 133 FPS average and 113 FPS minimum, is the recommended choice for 4K displays, as it offers a high frame rate without sacrificing too much visual detail.

CPU Role

The AMD Ryzen 7 5700X provides 8 cores and 16 threads, with a base clock of 3.40 GHz and a boost clock of 4.60 GHz. This Zen 3 architecture, codenamed Vermeer, has a 32 MB shared L3 cache and supports DDR4 memory with a dual-channel bus. In the context of Downfall, a horror game, the CPU's role is to handle game logic, physics, and AI, which typically scale with core count and clock speed.

The benchmark data for the CPU shows a 3DMark 16-thread score of 6858 and a single-thread score of 921. The Cinebench R23 multicore score is 13184, while the single-core score is 1499. These numbers indicate a strong multi-threaded performance that is well-suited for modern games that utilize multiple cores. The Geekbench multicore score of 10779 further confirms this, but the single-core score of 2016 highlights that the CPU's per-core performance is also competitive.

The recorded FPS at 1080p Low settings, where the CPU is most likely to be the bottleneck, shows an average of 366 FPS. This extremely high frame rate indicates that the Ryzen 7 5700X is not limiting the RTX 4070 Ti at lower resolutions. However, the gap between 1080p Low (366 FPS) and 1440p Low (262 FPS) is 104 FPS, which is a larger drop than the gap between 1440p Low and 4K Low (99 FPS). This suggests that at 1080p, the CPU is still capable of feeding the GPU enough frames, but the GPU's fill rate becomes the limiting factor as resolution increases.

The CPU's 65 W TDP and 7 nm process node indicate an efficient design that does not generate excessive heat, allowing the boost clock of 4.60 GHz to be sustained under load. The 3DMark 8-thread score of 5768 and max-thread score of 6850 show that the CPU scales well with thread count, which is beneficial for games that can utilize more than 8 threads. The PassMark multithread score of 26612 and single-thread score of 3385 further support this, positioning the CPU as a capable partner for the RTX 4070 Ti in this game.

How This Combo Ranks

The combination of the AMD Ryzen 7 5700X and NVIDIA GeForce RTX 4070 Ti ranks 486th out of 3716 tested combos in Downfall, placing it in the top 13% of all configurations. This rank reflects the strong performance of both components, with the GPU's 84th percentile ranking among all GPUs and the CPU's 79th percentile ranking among all CPUs contributing to a well-balanced pairing.

The GPU's nearest rivals show that the RTX 4070 Ti is closely matched with the NVIDIA GeForce RTX 5090 Mobile, which has an average score 0.8% higher, and the AMD Radeon Pro 5500 XT, which is 1.3% higher. On the other side, the NVIDIA RTX A6000 is 1.6% lower, and the Intel Arc A730M is 1.7% lower. These small deltas indicate that the RTX 4070 Ti sits in a competitive performance tier, and the differences in synthetic benchmarks do not necessarily translate to large differences in game FPS.

For the CPU, the nearest rivals include the Intel Core i5-12600K with an identical average score, the AMD Ryzen 7 5800 with a 0.2% higher score, and the Intel Core Ultra 5 125H with a 0.3% higher score. The AMD Ryzen 5 7600X is 0.2% lower. This tight clustering suggests that the Ryzen 7 5700X is well-positioned among its peers, and the choice between these CPUs would have minimal impact on Downfall's performance.

The combo rank of 486 out of 3716 indicates that there are 485 combinations that perform better in this game, likely featuring higher-end CPUs and GPUs. However, the fact that this combo sits in the top 13% demonstrates that it delivers a high level of performance for a mid-range to high-end pairing. The data shows that the RTX 4070 Ti, despite being end-of-life, still holds its own against newer mobile GPUs and professional workstation cards in synthetic benchmarks, which translates to strong gaming performance in Downfall.

FAQ

Q: What is the average FPS at 1080p with High settings?

A: The average FPS at 1920x1080 with High settings is 246, with no recorded minimum or maximum values in the database.

Q: How does the 4K Ultra preset compare to 4K Medium?

A: The 4K Ultra preset delivers an average of 68 FPS, while the 4K Medium preset delivers an average of 133 FPS with a minimum of 113 FPS and a maximum of 153 FPS. The Medium preset offers nearly double the frame rate.

Q: Is the RTX 4070 Ti bottlenecked by the Ryzen 7 5700X in this game?

A: The data shows that at 1080p Low, the combo achieves 366 FPS, which is very high. As resolution increases, the FPS drops consistently, indicating that the GPU becomes the limiting factor at higher resolutions, not the CPU.

Q: What is the best setting for 1440p gaming?

A: The High preset at 1440p provides an average of 176 FPS, which is the highest measured average for that resolution outside of Low settings. The Ultra preset at 1440p delivers 110 FPS, which is still playable but lower.

Q: How does this combo rank compared to other tested configurations?

A: This combo ranks 486th out of 3716 tested combos in Downfall, placing it in the top 13% of all configurations tested in the database.

Q: What is the minimum FPS recorded for this combo?

A: The only recorded minimum FPS values are for the Medium preset. At 1080p Medium, the minimum is 255 FPS, at 1440p Medium it is 182 FPS, and at 4K Medium it is 113 FPS.

Measured FPS Breakdown

At 1920x1080 resolution, the recorded data shows the following average FPS values: Low settings deliver 366 FPS, Medium settings deliver 300 FPS with a range of 255 to 345 FPS, High settings deliver 246 FPS, and Ultra settings deliver 154 FPS. The progression from Low to Ultra shows a 58% reduction in performance, with the most significant drop occurring between High and Ultra, which is a 92 FPS difference.

Moving to 2560x1440 resolution, the averages are as follows: Low settings deliver 262 FPS, Medium settings deliver 214 FPS with a range of 182 to 246 FPS, High settings deliver 176 FPS, and Ultra settings deliver 110 FPS. The drop from 1080p to 1440p is consistent across settings, averaging around 40% reduction, but the Ultra preset shows a 44 FPS drop, which is proportionally larger.

At 3840x2160 resolution, the averages are: Low settings deliver 163 FPS, Medium settings deliver 133 FPS with a range of 113 to 153 FPS, High settings deliver 109 FPS, and Ultra settings deliver 68 FPS. The 4K resolution shows the most dramatic scaling, with the Ultra preset falling below 70 FPS. The Medium preset at 4K maintains a minimum of 113 FPS, which is the only 4K configuration with a recorded minimum above 100 FPS.

The data reveals that the gap between Low and Ultra settings widens as resolution increases. At 1080p, the difference between Low and Ultra is 212 FPS, at 1440p it is 152 FPS, and at 4K it is 95 FPS. This indicates that at higher resolutions, the GPU's raw throughput is the primary constraint, and the settings preset has a smaller absolute impact on frame rate.

GPU Role

The NVIDIA GeForce RTX 4070 Ti is built on the Ada Lovelace architecture with a 5 nm process node and 35,800 million transistors. It features 7680 shading units, 240 texture mapping units, and 80 render output units, along with 60 ray tracing cores and 240 tensor cores. The GPU runs at a base clock of 2310 MHz and a boost clock of 2610 MHz, with memory clocked at 1313 MHz for an effective 21 Gbps speed.

The 12 GB of GDDR6X memory on a 192-bit bus provides a bandwidth of 504.2 GB/s, which is a significant factor in the GPU's ability to handle high-resolution textures in Downfall. The pixel rate of 208.8 GPixel/s and texture rate of 626.4 GTexel/s indicate that the GPU can process a large number of pixels and textures per second, which is directly relevant to the FPS results observed.

The GPU's benchmark scores show a 3DMark Steel Nomad DX12 score of 5024 and a Geekbench Vulkan score of 213808. The PassMark G3D score is 31624, and the PassMark GPU Compute score is 18396. These synthetic benchmarks place the RTX 4070 Ti in the 84th percentile of all GPUs, with an average benchmark score of 44795. The nearest rivals include the NVIDIA GeForce RTX 5090 Mobile with a 0.8% higher score, the AMD Radeon Pro 5500 XT with a 1.3% higher score, and the NVIDIA RTX A6000 with a 1.6% lower score.

The GPU's role in Downfall becomes increasingly important as resolution and settings increase. At 1080p Low, the GPU is not fully utilized, as evidenced by the 366 FPS average, but at 4K Ultra, the GPU is clearly the bottleneck, with the FPS dropping to 68. The 285 W TDP and 600 W suggested PSU indicate that the GPU requires substantial power, but the dual-slot design and 1x 16-pin connector are standard for this performance class. The end-of-life production status does not diminish its current performance, as the data shows it remains competitive in this game.