Downfall
This combination provides smooth gameplay with an average of 77 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 27 | 44 | 53 | 65 |
| 1440p QHD | 44 | 70 | 86 | 105 |
| 1080p Full HD | 62 | 99 | 120 | 147 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Downfall with AMD Ryzen 7 5700G + NVIDIA GeForce GTX 1660 Ti, In-Depth Analysis
The AMD Ryzen 7 5700G and NVIDIA GeForce GTX 1660 Ti pairing in Downfall represents a classic mid-range configuration from divergent hardware generations. The data shows a combination that is heavily dependent on resolution and settings to deliver a smooth experience, with the GPU acting as the primary bottleneck in most scenarios. This analysis breaks down the measured performance figures to explain where this combo excels and where it falls short.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 7 5700G is a Zen 3 (Cezanne) architecture processor with 8 cores and 16 threads. It operates with a base clock of 3.80 GHz and a boost clock of 4.60 GHz, which provides a substantial amount of compute headroom for a horror title like Downfall. The processor’s L3 cache is 16 MB, and it supports dual-channel DDR4 memory, which is standard for its AM4 socket platform.
In synthetic benchmarks, the CPU demonstrates strong multi-threaded capability. It scores 12,830.5 in Cinebench R23 multi-core and 1,494 in single-core, while its 3DMark 16-thread score is 6,629. This positions the chip in the 79th percentile among all CPUs, indicating that it is a capable performer for modern gaming workloads that can utilize multiple threads. However, the game’s engine may not fully exploit all 16 threads, as the 3DMark 2-thread score of 1,758 is significantly lower than the 8-thread score of 5,648, suggesting that Downfall likely relies on fewer cores for its primary simulation logic.
The measured FPS data reveals that the CPU is rarely the limiting factor. At 1080p with Low settings, the combo produces 147 FPS on averageable. When the resolution is increased to 4K, the average FPS at Low settings drops to 65. The massive performance delta between these resolutions indicates that the GPU is being stressed more heavily as pixel count increases, not the CPU. The processor’s passmark multi-thread score of 24,419 and single-thread score of 3,283 suggest it has enough headroom to feed the GPU at lower resolutions without dropping frames. The nearest rival, the Intel Core i9-9900K, scores an average of 27,097, which is only 0.2% higher than the 5700G’s average score of 27,051, confirming that the CPU is not the system's weak point.
GPU Role — VRAM, clocks, and how they relate to this game's results
The NVIDIA GeForce GTX 1660 Ti is a Turing-architecture GPU based on the TU116 chip, manufactured on a 12 nm process. It features 6 GB of GDDR6 memory on a 192-bit bus, providing a bandwidth of 288.0 GB/s. The GPU has a base clock of 1500 MHz and a boost clock of 1770 MHz, which are relatively modest by modern standards. It offers 1,536 shading units and 48 ROPs, with a pixel rate of 84.96 GPixel/s and a texture rate of 169.9 GTexel/s. The GPU’s FP32 performance is 5.437 TFLOPS.
This GPU sits in the 41st percentile of all GPUs, which is notably lower than the CPU’s 79th percentile. Its average benchmark score is 7,723, with a 3DMark Steel Nomad DX12 score of 1,061 and a Passmark G3D score of 12,871. The nearest rival, the AMD Radeon 540, scores 7,673, which is just 0.7% lower, indicating that the GTX 1660 Ti is positioned at the entry-level of the performance spectrum. The 6 GB VRAM capacity is sufficient for Downfall, which is a 2016 title, but the GPU’s raw compute power is what limits performance in higher settings and resolutions.
The measured FPS confirms the GPU is the primary bottleneck. At 1080p Ultra, the combo averages 62 FPS, which is half the 120 FPS seen at Medium settings. At 4K Ultra, the average FPS collapses to 27, which is unplayable. The performance scaling from 1080p to 4K is severe, demonstrating that the GPU cannot handle the increased pixel throughput. The GPU’s Passmark DirectX 12 score of 51 is particularly low, suggesting that the API path for this card is not optimized for the latest features, but Downfall is from an era where DX11 was more common, as indicated by the higher Passmark DirectX 11 score of 103.
FAQ — 4-6 Q&A pairs answerable from FACT PACK data
Q: Is the AMD Ryzen 7 5700G or the NVIDIA GeForce GTX 1660 Ti the limiting factor in Downfall?
A: Benchmark results indicate the GPU is the limiting factor. At 1080p Low, the combo achieves 147 FPS, but at 4K Low, it drops to 65 FPS. The CPU’s performance percentile (79th) is much higher than the GPU’s (41st), and the CPU’s nearest rival scores are nearly identical, confirming the GPU is the bottleneck.
Q: What is the best resolution for a playable experience with this combo?
A: The data shows that 1080p is the most suitable resolution. At 1080p Medium, the average FPS is 120, with a minimum of 102 FPS, which provides a smooth experience. At 1440p Medium, the average FPS drops to 86, which is still playable but less ideal for high-refresh-rate displays.
Q: How does the combo perform at 4K Ultra settings?
A: The measured data shows an average of 27 FPS at 3840x2160 Ultra settings. This is below the threshold for smooth gameplay and indicates that the GPU is severely overburdened at this resolution and preset combination.
Q: How does the CPU compare to its nearest rival in terms of raw processing power?
A: The Ryzen 7 5700G has an average benchmark score of 27,051. Its nearest rival, the Intel Core i9-9900K, scores 27,097, which is only 0.2% higher. This indicates the two processors are essentially tied in overall performance, with the 5700G being slightly ahead of the AMD Ryzen AI 7 445 (0.4%) and behind the Intel Core i5-14400T (-0.4%).
Q: What is the difference in performance between Low and Ultra settings at 1440p?
A: At 2560x1440, the average FPS at Low settings is 105, while at Ultra settings it is 44. This represents a substantial drop of 61 FPS, showing that the GPU’s rendering workload increases significantly with preset quality.
Q: Does the combo have enough memory for Downfall?
A: The GPU has 6 GB of GDDR6 memory, which is more than sufficient for a 2016 horror game. The CPU supports dual-channel DDR4 memory, and the game’s requirements are well within the memory capacities of both components.
How This Combo Ranks — use comboRankInGame vs other tested combos
In the database of tested combinations for Downfall, this specific pairing of the AMD Ryzen 7 5700G and NVIDIA GeForce GTX 1660 Ti ranks 3,202 out of 3,716 total combos. This places it in the lower percentile of systems tested, which is consistent with the GPU’s low performance percentile (41st). The rank indicates that while the CPU is strong, the overall system performance is dragged down by the GPU, especially when compared to other combos that might use higher-end graphics cards.
The ranking suggests that this configuration is not optimized for high-end play. The data shows that at 4K Ultra, the system only manages 27 FPS, which is a poor result relative to what other combos might achieve. The combo’s position in the 86th percentile of worst-performing systems (calculated from rank/total) highlights that users should not expect to run the game at maximum settings across all resolutions. However, the rank is not the lowest, meaning there are many weaker combinations, and the system can still provide a decent experience at 1080p Medium or Low settings.
The CPU’s high average benchmark score (27,051) versus the GPU’s low score (7,723) shows a clear imbalance. This is a system where the processor has plenty of headroom, but the graphics card is the limiting factor. The combo’s rank reflects this reality, as it is more indicative of the GPU’s performance than the CPU’s.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The measured FPS data provides a clear picture of how the system scales across resolutions. For High settings, the average FPS at 1080p is 99, at 1440p it is 70, and at 4K it is 44. This represents a steady decline of roughly 30% from 1080p to 1440p, and another 37% from 1440p to 4K. For Medium settings, the pattern is similar: 120 FPS at 1080p, 86 FPS at 1440p, and 53 FPS at 4K. The lowest settings show the most extreme scaling, with 147 FPS at 1080p, 105 FPS at 1440p, and 65 FPS at 4K.
This scaling behavior is a classic sign of a GPU-bound system. As the resolution increases, the number of pixels that the GPU must process grows exponentially, which directly impacts frame rate. The CPU’s workload does not increase with resolution, so the fact that FPS drops so significantly from 1080p to 4K confirms that the GTX 1660 Ti is the limiting component. The data shows that the 4K Ultra preset is essentially unplayable at 27 FPS, while 4K Low is still below the 60 FPS target at 65 FPS. The system is most efficient at 1080p, where the CPU can keep up with the GPU’s output, resulting in high frame rates.
The difference between Low and Ultra settings at each resolution also highlights the GPU’s limits. At 1080p, the gap between Low (147 FPS) and Ultra (62 FPS) is 85 FPS, showing that the GPU’s fill rate and shader processing are heavily taxed by higher quality presets. This scaling data is essential for understanding that the system is not future-proofed for higher resolutions and that users should prioritize 1080p for the best experience.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
The measured FPS data provides a complete matrix of performance across all combinations of resolution and settings. At 1920x1080, the average FPS is as follows: Low settings yield 147 FPS, Medium settings yield 120 FPS (with a minimum of 102 FPS and a maximum of 138 FPS), High settings yield 99 FPS, and Ultra settings yield 62 FPS. This shows a clear progression of decreasing performance as visual quality increases.
At 2560x1440, the average FPS drops across the board. Low settings produce 105 FPS, Medium settings produce 86 FPS (with a minimum of 73 FPS and a maximum of 99 FPS), High settings produce 70 FPS, and Ultra settings produce 44 FPS. The minimum FPS at Medium settings is still above 60, which is a key metric for playability.
At 3840x2160, the performance is significantly lower. Low settings yield an average of 65 FPS, Medium settings yield 53 FPS (with a minimum of 45 FPS and a maximum of 61 FPS), High settings yield 44 FPS, and Ultra settings yield 27 FPS. The minimum FPS at 4K Medium is 45, which is below the standard 60 FPS target, making it a borderline experience.
The data reveals that the only preset that consistently maintains an average above 60 FPS at all resolutions is Low. At 1080p, all presets except Ultra are above 60 FPS. At 1440p, only Low and Medium are above 60 FPS. At 4K, only Low is above 60 FPS, and even then, it is just barely at 65 FPS. This breakdown provides a clear roadmap for what settings users should choose based on their display resolution.
Settings Recommendations — which preset gives the best experience per the measured rows
Based on the measured FPS data, the optimal settings for this combo depend heavily on the target resolution and desired frame rate. For users with a 1080p monitor, the Medium preset is the best choice. It delivers an average of 120 FPS with a minimum of 102 FPS, ensuring a smooth and responsive experience without sacrificing too much visual fidelity. The High preset at 1080p drops to 99 FPS average, which is still good, but Medium offers a better balance of performance and quality.
For 1440p displays, the Medium preset is again the recommended choice, with an average of 86 FPS and a minimum of 73 FPS. This provides a playable experience that is above the 60 FPS threshold. The Low preset at 1440p offers 105 FPS, which is smoother, but the visual quality reduction may not be worth the extra frames. The High preset at 1440p averages 70 FPS, which is acceptable, but the minimum FPS is not listed, so Medium is a safer bet.
For 4K users, the data suggests that only the Low preset is viable, with an average of 65 FPS. The Medium preset at 4K averages 53 FPS with a minimum of 45 FPS, which can lead to noticeable stuttering in a horror game. The Ultra preset at 4K is not recommended, as the 27 FPS average is unplayable. The best overall experience for this combination is at 1080p with Medium settings, which provides a high frame rate and good visual quality. The data consistently shows that the GPU is the limiting factor, so users should prioritize lower resolutions and settings to achieve a smooth frame rate.
Hardware Specifications
AMD Ryzen 7 5700G
NVIDIA GeForce GTX 1660 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5700G + NVIDIA GeForce GTX 1660 Ti in Downfall
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 65.0 |
| 3840x2160 | Medium | 53.0 |
| 3840x2160 | High | 44.0 |
| 3840x2160 | Ultra | 27.0 |
| 2560x1440 | Low | 105.0 |
| 2560x1440 | Medium | 86.0 |
| 2560x1440 | High | 70.0 |
| 2560x1440 | Ultra | 44.0 |
| 1920x1080 | Low | 147.0 |
| 1920x1080 | Medium | 120.0 |
| 1920x1080 | High | 99.0 |
| 1920x1080 | Ultra | 62.0 |
Downfall with Ryzen 7 5700G + Other GPUs
See how Downfall performs with the same CPU but different graphics cards.
Downfall with GTX 1660 Ti + Other CPUs
See how Downfall performs with the same GPU but different processors.
Other Games with Ryzen 7 5700G + GTX 1660 Ti
Explore FPS benchmarks for other games using this same hardware combination.