Downfall

The AMD Ryzen 7 5700 paired with the NVIDIA GeForce RTX 3080 Ti delivers a strong performance profile in Downfall, a 2016 horror title that is clearly more demanding on the graphics card than the processor. The measured frame rates across the three tested resolutions reveal a system that can handle high-refresh-rate 1440p gaming with ease, while 4K remains viable at medium settings. The data indicates a GPU-bound scenario at higher resolutions, with the CPU providing ample headroom even at 1080p. This analysis breaks down the measured FPS, component roles, and optimal settings based solely on the provided benchmark data.

Resolution Scaling

The frame rate scaling from 1920x1080 to 3840x2160 clearly identifies the NVIDIA GeForce RTX 3080 Ti as the primary limiting component at higher resolutions. At the High preset, the average FPS drops from 208 at 1080p to 149 at 1440p, a reduction of 59 frames, and then further down to 93 at 4K. This pattern—a consistent decline as pixel count increases—is the classic signature of a GPU-bound workload, where the graphics card's rendering throughput is the bottleneck.

Comparing the Low preset scaling shows an even more pronounced GPU limitation. At 1080p Low, the system produces 311 FPS, which falls to 222 at 1440p and 138 at 4K. The percentage drop from 1080p to 4K is significant, indicating that even at the lowest settings, the RTX 3080 Ti is fully utilized at higher resolutions. The CPU is not the constraining factor here, as the frame rates remain exceptionally high even at 4K Low, suggesting the processor has significant headroom.

The Medium preset offers the only complete set of min/max FPS data, providing insight into frame time consistency. At 4K Medium, the average is 113 FPS with a minimum of 96 and maximum of 130, a spread of 34 frames. This variance suggests that while the average is smooth, there are moments of higher demand that cause the frame rate to dip. At 1440p Medium, the average rises to 182 FPS with a min of 154 and max of 209, and at 1080p Medium, it reaches 254 FPS with a min of 216 and max of 292, showing that the frame pacing becomes relatively tighter as resolution decreases.

The Ultra preset shows the largest relative performance hit. At 4K Ultra, the average FPS plummets to 58, which is only 62% of the High preset's 93 FPS. This significant drop indicates that the Ultra preset applies effects that are particularly taxing on the GPU's memory bandwidth and shader throughput. The scaling from 4K Ultra (58 FPS) to 1440p Ultra (93 FPS) and finally 1080p Ultra (130 FPS) shows that even at 1080p, the Ultra preset demands substantial GPU resources, preventing the system from reaching the high refresh rates seen with other presets.

GPU Role

The NVIDIA GeForce RTX 3080 Ti is equipped with 12 GB of GDDR6X memory on a 384-bit bus, providing a bandwidth of 912.4 GB/s. This high memory bandwidth is crucial for Downfall at 4K, where the Ultra preset likely requires large texture buffers. The data supports this: the 4K Ultra average of 58 FPS is the lowest measured, suggesting that the combination of high-resolution textures and advanced effects is saturating the memory subsystem or the GPU's compute units.

The GPU's clock speeds, with a base of 1365 MHz and a boost of 1665 MHz, are moderate for the Ampere architecture, but the sheer number of shading units (10240) and texture mapping units (320) drives performance. The 34.10 TFLOPS of FP32 compute is a substantial figure, and the benchmark results show it is well-utilized in this title. The GPU's percentile ranking among all tested GPUs is 83, indicating it is in the upper tier of graphics cards, which aligns with its measured performance in Downfall.

The RTX 3080 Ti's role is clearly dominant in this pairing. At every resolution and preset combination, the frame rates are high enough to suggest that the GPU is processing frames as fast as it can, while the CPU waits. The 4K Low preset's 138 FPS is particularly telling; it shows that even when graphical fidelity is reduced to its minimum, the GPU is still the limiting factor, as the CPU is not generating enough load to push the frame rate higher. The GPU's 80 RT cores and 320 tensor cores, while present, are not directly evidenced in the standard rasterization benchmarks, but they contribute to the overall architecture's capabilities.

How This Combo Ranks

In the global database of tested combinations for Downfall, this specific pairing of the AMD Ryzen 7 5700 and NVIDIA GeForce RTX 3080 Ti ranks 970th out of 3716 total combinations. This places it in the top 26% of all tested systems, which is a solid result given the components' specifications. The combo ranks in the 74th percentile, meaning it outperforms roughly three-quarters of the other CPU and GPU pairings tested in this game.

This ranking is driven primarily by the GPU's high average benchmark score. The RTX 3080 Ti has an average benchmark score of 41187 and a percentile ranking of 83 versus all GPUs, indicating it is a top-tier performer. In comparison, the CPU's average benchmark score is 25517 with a percentile of 78 versus all CPUs. The combo's ranking of 970 is a synthesis of these two components, and the data suggests that the GPU contributes more to the overall gaming performance in Downfall than the CPU does.

The nearest rival GPUs to the RTX 3080 Ti have average scores within a narrow band. The AMD Radeon Pro 5300 scores 40870 (0.8% lower), the NVIDIA Tesla M40 24 GB scores 41707 (1.2% higher), and the NVIDIA GeForce RTX 5070 scores 40377 (2% lower). These small delta percentages indicate that the RTX 3080 Ti sits in a competitive performance tier, and its ranking in Downfall reflects this, as it is likely near other high-end graphics cards in the combo rankings.

Settings Recommendations

Based on the measured FPS data, the optimal preset depends on the target resolution and refresh rate. For 4K gaming, the Medium preset is the clear recommendation. It provides an average of 113 FPS, which is well above the 60 FPS threshold for smooth play, and the minimum of 96 FPS ensures that there are no significant stutters. The High preset at 4K drops to 93 FPS average, which is still playable, but the Medium preset offers a better balance of visual quality and performance headroom, especially given the 34-frame spread between min and max on Medium.

At 1440p, the High preset is the best choice for a high-refresh-rate experience. It achieves an average of 149 FPS, which is sufficient for 144Hz monitors, and the visual quality is significantly better than Medium. The Ultra preset at 1440p yields 93 FPS, which is also acceptable, but the High preset provides a 60% performance increase over Ultra while still looking very good. For 1080p, the High preset at 208 FPS is recommended for competitive play, but the Medium preset at 254 FPS offers even higher frame rates for esports-style gaming, though with reduced visual fidelity.

The Ultra preset is generally not recommended for this combo, as it causes the largest performance penalty across all resolutions. At 4K, it drops to 58 FPS, which is below the ideal smoothness threshold, and even at 1080p, it only reaches 130 FPS, which is lower than the Medium preset's 254 FPS. The data suggests that the visual improvements of Ultra are not worth the significant frame rate cost, making High or Medium the more efficient choices.

Measured FPS Breakdown

At 1920x1080, the system demonstrates its maximum frame rate potential. The Low preset delivers an average of 311 FPS, which is the highest measured result in the entire dataset. The Medium preset follows with 254 FPS (min 216, max 292), and the High preset achieves 208 FPS. The Ultra preset drops to 130 FPS, showing a clear hierarchy where each step up in settings reduces performance by roughly 20-25%.

Moving to 2560x1440, the frame rates remain high but show the expected scaling. Low preset produces 222 FPS, Medium averages 182 FPS (min 154, max 209), High averages 149 FPS, and Ultra averages 93 FPS. The transition from 1080p to 1440p results in a ~28-30% decrease in FPS across all presets, which is consistent with the increased pixel count. The Medium preset's min/max spread of 55 frames is the widest, suggesting occasional frame rate dips during intense scenes.

At 3840x2160, the performance scaling becomes more pronounced. Low preset averages 138 FPS, Medium averages 113 FPS (min 96, max 130), High averages 93 FPS, and Ultra drops to 58 FPS. The gap between Medium and High is 20 FPS, while the gap between High and Ultra is 35 FPS, indicating that the Ultra preset imposes a heavier load. The 4K Medium preset's minimum of 96 FPS is particularly noteworthy, as it ensures the experience stays above 90 FPS even in demanding moments, making it the most stable high-resolution option.

CPU Role

The AMD Ryzen 7 5700 is an 8-core, 16-thread processor based on the Zen 3 architecture, with a base clock of 3.70 GHz and a boost clock of 4.60 GHz. Its 16 MB of L3 cache and dual-channel DDR4 memory support are sufficient for gaming, and its benchmark scores reflect a capable mid-range to upper-mid-range processor. In the 3DMark tests, it scores 6628 with 16 threads and 901 for single-thread, showing strong multi-threaded scaling. The Cinebench R23 results are 20655 for multicore and 2916 for single-core, indicating robust all-core performance.

In Downfall, the CPU's role is secondary to the GPU, as evidenced by the frame rate scaling. At 1080p Low, the system achieves 311 FPS, which is exceptionally high and suggests the CPU is not limiting. If the CPU were the bottleneck, we would expect the frame rates to plateau at lower values across different presets. Instead, the consistent scaling from Low to Ultra indicates the GPU is the limiting factor at all settings.

The CPU's benchmark scores place it in the 78th percentile versus all CPUs, with an average score of 25517. Its nearest rivals include the Intel Xeon D-2752TER (25530, -0.1% delta), AMD Ryzen 5 7640U (25485, +0.1% delta), and AMD Ryzen 5 6600H (25550, -0.1% delta), showing it performs within a narrow band of similar processors. This performance level is more than adequate for Downfall, as the game appears to be GPU-bound, and the processor's 8 cores and 16 threads provide sufficient headroom for the game's logic and physics without becoming a constraint.

FAQ

Q: What is the best preset for 4K gaming with this combo?

A: The Medium preset is recommended for 4K, as it provides an average of 113 FPS with a minimum of 96 FPS, ensuring smooth gameplay. The High preset at 93 FPS is playable, but Medium offers better performance stability.

Q: Does this system achieve high refresh rates at 1440p?

A: Yes, at 1440p High the average FPS is 149, which is suitable for 144Hz monitors. The Low preset reaches 222 FPS, and the Medium preset averages 182 FPS, all of which are high enough for competitive gaming.

Q: Which component is the bottleneck in this game?

A: The data shows the NVIDIA GeForce RTX 3080 Ti is the limiting component, as frame rates scale consistently with resolution and settings. At 1080p Low, the system hits 311 FPS, indicating the CPU has ample headroom.

Q: How does the Ultra preset compare to High in terms of performance?

A: The Ultra preset causes a significant performance drop across all resolutions. At 4K, it averages 58 FPS versus 93 for High, and at 1080p, it averages 130 FPS versus 208 for High, representing a roughly 40% reduction in performance.

Q: What is the frame time consistency like at 4K Medium?

A: At 4K Medium, the average FPS is 113 with a minimum of 96 and maximum of 130, showing a 34-frame spread. This indicates occasional dips but generally stable performance above 90 FPS.

Q: How does this CPU compare to its nearest rivals?

A: The AMD Ryzen 7 5700 has an average benchmark score of 25517, which is nearly identical to its nearest rivals: the Intel Xeon D-2752TER (25530, -0.1% delta) and AMD Ryzen 5 6600H (25550, -0.1% delta), showing essentially equivalent performance.