Doom
This combination offers playable performance with an average of 40 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 16 | 19 | 23 | 26 |
| 1440p QHD | 29 | 35 | 42 | 48 |
| 1080p Full HD | 45 | 55 | 65 | 74 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Doom with Intel Core Ultra 7 265 + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis
The Intel Core Ultra 7 265 is a 20-core, 20-thread desktop processor built on the Arrow Lake architecture and the 3 nm process node from TSMC. It operates with a base clock of 2.40 GHz and a boost clock of 5.30 GHz, with a 65 W TDP. Its cache layout includes 192 KB of L1 per core, 3 MB of L2 per core, and 30 MB of shared L3 cache. The CPU supports DDR5 memory over a dual-channel bus, providing a memory bandwidth of 102.4 GB/s, and it connects via PCIe Gen 5 with 20 CPU lanes. The integrated graphics are Arc Xe-LPG Graphics with 32 execution units. In synthetic benchmarks, this CPU achieves a Cinebench R23 multi-core score of 42216 and a single-core score of 5960, while its PassMark multi-thread score is 49682 and single-thread score is 4689. Its average benchmark score sits at 64640, placing it in the 93rd percentile among all CPUs. Compared to its nearest rivals, it trails the AMD EPYC 4464P by just 0.3 percent, leads the Intel Core Ultra 7 265F by 0.3 percent, and is 0.7 percent ahead of the AMD EPYC 7343, while the AMD EPYC 9124 is 0.7 percent faster.
For a game like Doom, which is a fast-paced FPS from 2016, the CPU’s role is to feed the GPU with rendered frames and handle game logic, physics, and AI. The 20 cores and 20 threads provide substantial parallel processing capability, which is more than sufficient for a title of that era, as Doom was designed to run on far more modest hardware. The high boost clock of 5.30 GHz ensures strong single-threaded performance, which matters for the main game thread that often becomes a bottleneck in older engines. The Cinebench R15 single-core score of 600 and R20 single-core score of 884 indicate robust per-core throughput, while the R15 multi-core score of 4255 and R20 multi-core score of 6268 show that the processor can handle heavy multi-threaded workloads if the game engine can utilize them. However, in Doom’s case, the data suggests that the GPU is the primary constraint, as the measured frame rates are low across all settings and resolutions, which points to the graphics card being overwhelmed rather than the CPU lacking headroom. The CPU’s PassMark physics score of 2923 and data compression score of 522983 further indicate a processor that is not likely to limit frame rates in a GPU-bound scenario. The 30 MB of shared L3 cache also helps with data locality, reducing memory latency, which can benefit frame pacing in a game that streams textures and geometry.
The NVIDIA GeForce GTX 1050 Ti is a Pascal-architecture GPU on the 14 nm process from Samsung, with a chip designated GP107. Its base clock is 1291 MHz, boosting to 1392 MHz, and its memory runs at 1752 MHz, which translates to 7 Gbps effective. The card has 4 GB of GDDR5 memory on a 128-bit bus, yielding a bandwidth of 112.1 GB/s. It contains 768 shading units, 48 texture mapping units, and 32 render output units. Its pixel rate is 44.54 GPixel/s, and its texture rate is 66.82 GTexel/s, with an FP32 throughput of 2.138 TFLOPS. The GPU’s TDP is 75 W, and it requires no power connectors, drawing power solely from the PCIe slot. It supports DirectX 12 (12_1), OpenGL 4.6, and Vulkan 1.4. In benchmark tests, the GTX 1050 Ti scores 6340 in PassMark G3D, 2652 in PassMark GPU Compute, and 305 in 3DMark Steel Nomad DX12. Its average benchmark score is 4193, placing it in only the 25th percentile among all GPUs. Its nearest rivals include the AMD Radeon R5 M330, which is 0.6 percent slower, and the NVIDIA Quadro K2100M, which is 1 percent slower, while the Quadro K3000M is 1.1 percent faster and the AMD Radeon Vega 3 is 1.8 percent faster.
In Doom, the GPU’s role is critical because the game relies heavily on the graphics card to render its id Tech 6 engine, which uses advanced techniques like dynamic resolution scaling and asynchronous compute. The GTX 1050 Ti’s 4 GB of VRAM is a limiting factor at higher resolutions and settings, as Doom’s textures and effects can exceed that capacity, causing stutters and reduced frame rates. The memory bandwidth of 112.1 GB/s is also modest, which becomes evident at 1440p and 4K where the fill rate and memory throughput are stressed. The 768 shading units provide a baseline compute capability, but the card’s low FP32 throughput of 2.138 TFLOPS means it struggles to maintain high frame rates in a game that demands constant pixel shading. The boost clock of 1392 MHz is modest, and the card cannot be overclocked aggressively due to its power limits, which are constrained by the lack of external power connectors. The data shows that at 4K Ultra settings, the average FPS drops to 16, which is unplayable, and even at 1080p Low settings, the maximum average FPS is just 74. This GPU is clearly the bottleneck in this combo, as the CPU is far more capable than the graphics card can utilize.
The combo of the Intel Core Ultra 7 265 and the NVIDIA GeForce GTX 1050 Ti ranks 2884 out of 2930 tested combos in Doom, placing it in the bottom 1.5 percent of all configurations. This low rank is almost entirely attributable to the GPU, which is an entry-level card from 2016, while the CPU is a high-end desktop processor from 2025. The pairing is wildly unbalanced, as the CPU’s capabilities are wasted because the GPU cannot keep up with the demands of the game at any resolution above the lowest settings. In the context of the benchmark database, this combo sits near the bottom, meaning that most other combinations of CPUs and GPUs deliver higher frame rates in Doom. The only combos that rank lower are likely those with even older or more underpowered graphics cards, but the GTX 1050 Ti’s 25th percentile ranking among all GPUs confirms its position as a low-tier performer. The CPU’s 93rd percentile ranking stands in stark contrast, creating a situation where the processor is never the limiting factor, and the user would need a significantly more powerful GPU to unlock the CPU’s potential. The data shows that this combo is not suitable for competitive or high-refresh-rate play, as even the best measured result is below typical gaming targets.
At 1080p, the measured frame rates show a clear progression across settings. With Low settings, the average FPS is 74, which is the highest recorded for this combo. Moving to Medium settings, the average drops to 65 FPS, with a minimum of 55 and a maximum of 74. High settings yield an average of 55 FPS, and Ultra settings bring the average down to 45 FPS. These numbers indicate that at 1080p, the game is playable at Low and Medium settings, but High and Ultra require compromises. The delta between Low and Ultra is 29 FPS, which is a significant drop that reflects the GPU’s inability to handle the increased shading and texture loads. At 1440p, the frame rates decline further. Low settings produce an average of 48 FPS, Medium drops to 42 FPS with a minimum of 36 and maximum of 48, High falls to 35 FPS, and Ultra bottoms out at 29 FPS. These figures are below the 60 FPS target that most gamers prefer, meaning that even at Low settings, the experience will be suboptimal. At 4K, the situation becomes dire. Low settings yield an average of 26 FPS, Medium drops to 23 FPS with a minimum of 19 and maximum of 26, High falls to 19 FPS, and Ultra plunges to 16 FPS. None of these results are playable, as even the highest average is below 30 FPS, which is typically considered the minimum for a playable experience in a fast-paced FPS.
The resolution scaling from 1080p to 4K shows a steep decline in performance, which is characteristic of a GPU-bound scenario. At 1080p Low, the average FPS is 74, and at 4K Low, it drops to 26, representing a 65 percent reduction in frame rate. For Medium settings, the drop is from 65 FPS at 1080p to 23 FPS at 4K, a 65 percent decline. High settings fall from 55 FPS at 1080p to 19 FPS at 4K, a 65 percent reduction, and Ultra settings drop from 45 FPS at 1080p to 16 FPS at 4K, a 64 percent decline. This consistent scaling pattern across all settings indicates that the limiting component is the GPU, as its memory bandwidth and shading capacity are overwhelmed by the increased pixel count. If the CPU were the bottleneck, the frame rates would not decline so sharply with resolution, because the CPU’s workload remains roughly constant regardless of resolution. The data shows that the GTX 1050 Ti’s 112.1 GB/s of memory bandwidth and 44.54 GPixel/s pixel rate are insufficient for 4K rendering, and even at 1440p, the performance is marginal. The 4 GB VRAM is also a factor, as higher resolutions require more video memory for frame buffers and texture storage, which can lead to swapping and stuttering. In contrast, the CPU’s performance is unaffected by resolution, so the scaling behavior confirms that this combo is severely GPU-limited.
For settings recommendations, the measured rows show that the only way to achieve near-playable frame rates is to use Low settings at 1080p, which produces an average of 74 FPS. This is the best experience this combo can offer, as it stays above the 60 FPS threshold that is considered smooth for most players. Medium settings at 1080p yield 65 FPS, which is also acceptable, but the minimum of 55 FPS indicates that there may be occasional dips below 60, which could be noticeable in fast action sequences. High settings at 1080p drop to 55 FPS, which is below the preferred target, and Ultra settings at 45 FPS are not recommended for a game that requires quick reactions. At 1440p, Low settings at 48 FPS are borderline, but the frame rate is not consistent enough for competitive play. Medium settings at 42 FPS and High at 35 FPS are not recommended, and Ultra at 29 FPS is unplayable. At 4K, all settings produce frame rates below 30 FPS, making the game unplayable regardless of settings. Therefore, the best preset for this combo is Low at 1080p, which provides the highest average FPS while maintaining a relatively stable experience. If the user prioritizes visual quality over frame rate, Medium at 1080p is the maximum acceptable setting, but it comes with a risk of occasional frame drops. For any resolution above 1080p, the data suggests that the user should lower the resolution or upgrade the GPU, as no settings combination can achieve a playable frame rate. The Ultra preset is never worth using with this GPU, as it yields the lowest frame rates at every resolution, and the visual improvement does not justify the performance penalty. The measured data indicates that this combo is best suited for 1080p gaming with low to medium settings, and users should avoid higher resolutions unless they are willing to accept sub-30 FPS performance.
Hardware Specifications
Intel Core Ultra 7 265
NVIDIA GeForce GTX 1050 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra 7 265 + NVIDIA GeForce GTX 1050 Ti in Doom
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 26.0 |
| 3840x2160 | Medium | 23.0 |
| 3840x2160 | High | 19.0 |
| 3840x2160 | Ultra | 16.0 |
| 2560x1440 | Low | 48.0 |
| 2560x1440 | Medium | 42.0 |
| 2560x1440 | High | 35.0 |
| 2560x1440 | Ultra | 29.0 |
| 1920x1080 | Low | 74.0 |
| 1920x1080 | Medium | 65.0 |
| 1920x1080 | High | 55.0 |
| 1920x1080 | Ultra | 45.0 |
Doom with iUltra 7 265 + Other GPUs
See how Doom performs with the same CPU but different graphics cards.
Doom with GTX 1050 Ti + Other CPUs
See how Doom performs with the same GPU but different processors.
Other Games with iUltra 7 265 + GTX 1050 Ti
Explore FPS benchmarks for other games using this same hardware combination.