Doom

Resolution Scaling

The measured FPS data for Doom with the AMD Ryzen 5 9600X and AMD Radeon RX 7600 reveals a clear pattern of GPU-bound scaling as resolution increases. At 1920x1080 with High settings, the combo produces 142.4 FPS average. Moving to 2560x1440 High drops this to 92.1 FPS, a reduction of roughly 35%. At 3840x2160 High, the average falls further to 49.2 FPS, which represents a 65% loss from the 1080p figure. This steep decline indicates the Radeon RX 7600 becomes the dominant limiting factor at higher resolutions.

The scaling behavior across settings tells a consistent story. At 1080p Low, the system reaches 192.2 FPS, while 1440p Low yields 127 FPS and 4K Low drops to 68.4 FPS. The 4K Low result is notable because it still exceeds the 60 FPS threshold, suggesting the combination retains playability even at maximum resolution when graphical demands are minimized. However, the gap between 1440p and 4K at Low settings (58.6 FPS difference) is larger than the gap between 1080p and 1440p (65.2 FPS difference), showing that pixel count scaling becomes increasingly punishing as resolution climbs.

Ultra settings amplify the resolution penalty dramatically. At 1080p Ultra, the combo manages 118.1 FPS, which is respectable. At 1440p Ultra, the average falls to 74.2 FPS, still fluid for most displays. But at 4K Ultra, the average drops to 42.7 FPS, dipping below the 60 FPS mark and indicating that this preset at 4K exceeds what the RX 7600 can comfortably deliver. The data suggests that the CPU has ample headroom at lower resolutions, but the GPU's 8 GB memory and 128-bit bus become increasingly strained as resolution rises.

The pattern across all four settings at each resolution is consistent: Medium settings offer a middle ground, with 166.6 FPS at 1080p, 110.5 FPS at 1440p, and 59.8 FPS at 4K. The fact that Medium at 4K nearly hits 60 FPS while High falls to 49.2 FPS shows that even modest setting reductions can meaningfully improve headroom at high pixel counts.

FAQ

Q: What is the highest average FPS recorded for this combo in Doom?

A: The highest measured average FPS is 192.2, achieved at 1920x1080 with Low settings.

Q: Can this combo maintain 60 FPS at 4K resolution?

A: Yes, at Low and Medium settings, the combo averages 68.4 FPS and 59.8 FPS respectively. At High settings, it drops to 49.2 FPS, and at Ultra it falls to 42.7 FPS.

Q: How does the CPU's multi-threaded performance compare to its nearest rivals?

A: The Ryzen 5 9600X has an average benchmark score of 28246, which places it 0.3% ahead of the Intel Core i5-13490F and 0.3% ahead of the AMD Ryzen 5 230. It trails the AMD Ryzen 7 8845HS by 0.4% and the Intel Core i5-14500T by 0.5%.

Q: What is the GPU's percentile ranking among all tested GPUs?

A: The AMD Radeon RX 7600 sits in the 63rd percentile among all GPUs, with an average benchmark score of 20258.

Q: Which resolution and settings combo yields the lowest average FPS?

A: The lowest measured average is 42.7 FPS, recorded at 3840x2160 with Ultra settings.

Q: How much FPS is gained by switching from Ultra to Low at 1080p?

A: At 1920x1080, Low settings produce 192.2 FPS compared to 118.1 FPS on Ultra, a gain of 74.1 FPS.

CPU Role

The AMD Ryzen 5 9600X contributes to Doom's performance primarily through its six cores and twelve threads, built on the Zen 5 architecture with a 4 nm process. Its base clock of 3.90 GHz and boost clock of 5.40 GHz provide strong single-thread responsiveness, which matters for a fast-paced FPS. The processor's 32 MB shared L3 cache and dual-channel DDR5 memory support with 89.6 GB/s bandwidth ensure data flows efficiently to the GPU.

Benchmark data shows the CPU's single-threaded strength: Cinebench R23 single-core scores 3603, and Geekbench single-core reaches 3363. Multi-threaded scores are equally robust, with Cinebench R23 multi-core at 25525 and Passmark multithread at 30027. The processor's percentile rank of 85 among all CPUs indicates it sits well above the median in overall compute capability.

In Doom specifically, the CPU's role becomes evident when examining FPS scaling across resolutions. At 1080p Low, the system achieves 192.2 FPS, which is a high frame rate that still leaves headroom for the CPU to feed the GPU. The fact that 1080p Ultra yields 118.1 FPS while 4K Ultra drops to 42.7 FPS suggests the CPU maintains adequate throughput even at lower resolutions, and the GPU becomes the bottleneck as pixel load increases. The 3DMark scores reinforce this: 16-thread performance scores 7585, while max-thread performance reaches 7590, showing consistent scaling across thread counts.

The CPU's nearest rivals in average benchmark score include the Intel Core i5-13490F at 28173 (0.3% slower), the AMD Ryzen 5 230 at 28164 (0.3% slower), and the AMD Ryzen 7 8845HS at 28369 (0.4% faster). These marginal deltas indicate the 9600X sits in a tightly contested performance band, with no single rival dominating by more than half a percent.

Settings Recommendations

Based on the measured FPS rows, the optimal experience depends on the target resolution and desired frame rate. For 1080p displays, High settings deliver 142.4 FPS, which exceeds the refresh rate of most standard monitors and provides a smooth experience without the visual compromises of Low settings. Ultra at 1080p still achieves 118.1 FPS, so players with high-refresh-rate panels can opt for Ultra and remain well above 100 FPS.

At 1440p, High settings produce 92.1 FPS, which is suitable for 60 Hz and 75 Hz monitors, while Medium settings reach 110.5 FPS for those seeking higher frame rates. Ultra at 1440p drops to 74.2 FPS, still playable but with diminishing returns over High given the performance cost. Low settings at 1440p yield 127 FPS, which may appeal to competitive players prioritizing frame rate over visual fidelity.

For 4K, the data indicates that Low settings (68.4 FPS) are the safest choice for maintaining fluid gameplay, with Medium (59.8 FPS) being a borderline option that hovers near the 60 FPS mark. High (49.2 FPS) and Ultra (42.7 FPS) fall short of smooth gameplay thresholds, so they are not recommended for 4K unless the player accepts sub-60 FPS performance. Overall, the best balance of visual quality and performance appears to be High at 1080p or 1440p, where the combo delivers strong frame rates without sacrificing graphical fidelity.

How This Combo Ranks

The combination of the AMD Ryzen 5 9600X and AMD Radeon RX 7600 ranks 1147 out of 1681 tested combos in Doom. This places the combo in the lower-middle portion of the database, indicating that while it delivers playable performance at many settings, it trails a substantial number of other pairings in this specific title. The rank reflects the GPU's 63rd percentile standing among all GPUs, which tempers the CPU's stronger 85th percentile position.

The GPU's nearest rivals in average benchmark score include the AMD Radeon RX 7600 XT at 20146 (0.6% slower), which is surprising given the XT variant typically performs better, and the AMD Radeon RX 460 at 20088 (0.8% slower). The NVIDIA GeForce RTX 3070 Mobile at 20534 is 1.3% faster, and the Intel Arc B570 at 20556 is 1.5% faster. These close margins suggest the RX 7600 sits in a competitive segment where small performance differences separate products.

The combo's rank of 1147 out of 1681 means roughly 68% of tested combinations outperform it in Doom. This is consistent with the GPU being a mid-range part, as the CPU's strong benchmark scores cannot compensate for the GPU's limitations in a title that scales heavily with resolution and settings. The data shows the combo is best suited for 1080p and 1440p gaming rather than high-end 4K performance.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest results. Low settings average 192.2 FPS, Medium settings average 166.6 FPS, High settings average 142.4 FPS, and Ultra settings average 118.1 FPS. The spread from Low to Ultra is 74.1 FPS, showing that settings have a significant impact at this resolution.

At 2560x1440, performance remains solid. Low settings average 127 FPS, Medium settings average 110.5 FPS, High settings average 92.1 FPS, and Ultra settings average 74.2 FPS. The drop from 1080p to 1440p at each settings level ranges from 49.8 FPS (Low) to 43.9 FPS (Ultra), indicating a consistent resolution penalty.

At 3840x2160, the combo's limits become apparent. Low settings average 68.4 FPS, Medium settings average 59.8 FPS, High settings average 49.2 FPS, and Ultra settings average 42.7 FPS. The difference between 1440p and 4K is steepest at Low settings, where FPS falls by 58.6, and mildest at Ultra, where it falls by 31.5. Across all resolutions, the gradient from Low to Ultra remains consistent, with Ultra typically costing 35-40% of the Low frame rate at each resolution. The measured data confirms that this pairing is most effective at 1080p and 1440p, with 4K requiring Low or Medium settings for acceptable performance.