Control

# Control with AMD Ryzen 7 5700X3D + NVIDIA GeForce RTX 5090 D

The AMD Ryzen 7 5700X3D paired with the NVIDIA GeForce RTX 5090 D delivers exceptional performance in Control, with the measured data showing a combination that scales cleanly across resolutions and settings. The RTX 5090 D, with its 32 GB of GDDR7 memory and 1.79 TB/s bandwidth, proves to be the dominant force in this pairing, pushing frame rates that range from 83 FPS at 4K Ultra to 198 FPS at 1080p Low. The Ryzen 7 5700X3D, with 8 cores and 16 threads based on Zen 3 architecture, provides sufficient headroom to keep the GPU fed, as evidenced by the relatively modest frame rate drops when moving from 1080p to 1440p compared to the larger drops seen at 4K. This combo ranks 128th out of 2,888 tested combinations in this game, placing it in the top 4.4% of all tested systems — a strong result that reflects the GPU's massive compute resources and the CPU's capable 3D V-Cache design.

Resolution Scaling

The frame rate scaling from 1080p to 4K reveals a clear pattern: the RTX 5090 D is the primary bottleneck at higher resolutions, while the CPU becomes more relevant at lower resolutions. At High settings, the average frame rate drops from 168 FPS at 1080p to 142 FPS at 1440p — a 15.5% reduction — and then further to 96 FPS at 4K, which represents a 42.9% drop from the 1080p figure. This progressive decline indicates that the GPU's rendering load scales predictably with pixel count, and the 5090 D's 104.8 TFLOPS of FP32 compute is being fully utilized at 4K.

Looking at Low settings, the scaling is even more revealing. At 1080p Low, the combo achieves 198 FPS, dropping to 181 FPS at 1440p (an 8.6% reduction) and then to 152 FPS at 4K (a 23.2% reduction from 1080p). The relatively small penalty between 1080p and 1440p at Low settings suggests that the CPU is beginning to limit performance at 1080p, as the frame rate difference between 1080p and 1440p is smaller than the pixel count increase would suggest. The Ryzen 7 5700X3D's 96 MB of shared L3 cache and 16 threads help maintain high minimum frame rates, though the measured data shows no minimum FPS values for Low settings at any resolution.

The most dramatic scaling occurs at Ultra settings. The combo delivers 160 FPS at 1080p Ultra, dropping to 124 FPS at 1440p Ultra (a 22.5% reduction) and then to 83 FPS at 4K Ultra (a 48.1% reduction from 1080p). This steep drop at 4K Ultra indicates that the game's most demanding settings, likely including high-resolution textures and advanced lighting effects, place an enormous load on the GPU's 32 GB memory buffer and 176 ROPs. The 5090 D's 423.6 GPixel/s pixel rate helps, but 4K Ultra remains a heavy workload, with the average frame rate falling below the 100 FPS mark for the first time in the measured data.

Medium settings show the most balanced scaling pattern. At 1080p Medium, the average is 175 FPS with a minimum of 148 FPS and maximum of 201 FPS. Moving to 1440p Medium, the average drops to 159 FPS (a 9.1% reduction), with minimum and maximum values of 135 FPS and 183 FPS respectively. At 4K Medium, the average falls to 108 FPS (a 38.3% reduction from 1080p), with a minimum of 92 FPS and maximum of 124 FPS. The medium preset appears to be the sweet spot for this combo, as it maintains playable frame rates at all resolutions while providing the only settings tier with complete minimum and maximum FPS data across all three resolutions.

Settings Recommendations

The measured data strongly suggests that Medium settings offer the best balance between visual quality and frame rate stability for this combo. At 4K Medium, the combo maintains an average of 108 FPS with a minimum of 92 FPS, ensuring that even the most demanding scenes stay above 60 FPS. The jump to High settings at 4K costs 12 FPS on average (from 108 to 96 FPS), while the jump to Ultra costs a further 13 FPS (from 96 to 83 FPS). Given that Medium provides a 25 FPS advantage over Ultra at 4K, the visual fidelity difference between Medium and Ultra in Control is unlikely to justify the performance cost for most users.

At 1440p, the recommendation shifts slightly toward High settings. The combo achieves 142 FPS at 1440p High, which is only 17 FPS below the 159 FPS seen at Medium and 18 FPS above the 124 FPS at Ultra. The 142 FPS average at High settings comfortably exceeds the refresh rate of most 1440p monitors, and the additional visual quality over Medium is worthwhile when the performance headroom is ample. For users with 240 Hz displays, Medium at 159 FPS would be the better choice, but for standard 144 Hz or 165 Hz panels, High is the recommended preset.

At 1080p, the situation is different. The combo achieves 168 FPS at High settings, 175 FPS at Medium, and 160 FPS at Ultra. The differences between presets are relatively small at this resolution, with only a 15 FPS gap between the lowest (Ultra at 160 FPS) and highest (Medium at 175 FPS) settings. Given the small performance delta, Ultra settings at 1080p are viable for users who prioritize maximum visual quality, as the 160 FPS average is still exceptionally smooth. However, for competitive play or high refresh rate displays, Low settings at 198 FPS provide the maximum frame rate, though the visual trade-off may be significant.

The data indicates that 4K Ultra is the only combination that falls below 90 FPS, with an average of 83 FPS. This remains playable but is noticeably less smooth than the 96 FPS seen at 4K High. The 13 FPS difference between High and Ultra at 4K suggests that High is the recommended ceiling for 4K gaming with this combo, especially considering that the minimum FPS data for Ultra settings is not available, making it unclear whether frame pacing remains consistent under load.

GPU Role

The NVIDIA GeForce RTX 5090 D plays the dominant role in this combo's performance in Control. With 32 GB of GDDR7 memory on a 512-bit bus, the GPU provides 1.79 TB/s of memory bandwidth — a figure that ensures texture streaming and high-resolution assets are never bottlenecked by memory throughput. The card's 92,200 million transistors on a 750 mm² die, built on TSMC's 5 nm process, deliver 104.8 TFLOPS of FP32 compute, which is the engine behind the high frame rates observed across all settings and resolutions.

The GPU's clock behavior is worth noting. The base clock of 2017 MHz and boost clock of 2407 MHz represent a 19.3% boost headroom, allowing the card to dynamically increase performance under load. The 1,636.8 GTexel/s texture rate and 423.6 GPixel/s pixel rate are critical for Control's particle effects and post-processing, which are known to be demanding. The 170 RT cores and 680 tensor cores provide dedicated hardware for ray tracing and DLSS features, though the measured FPS data does not specify whether these features were enabled during testing.

The RTX 5090 D's benchmark scores corroborate its strong gaming performance. The card achieves a Passmark G3D score of 44,065 and a Geekbench Vulkan score of 376,915, with a 3DMark Steel Nomad DX12 score of 14,326. These synthetic benchmarks place the GPU in the 92nd percentile of all GPUs, with an average benchmark score of 77,712. The nearest rivals in the database include the AMD Radeon RX 6650M XT (average score 76,904, delta 1.1%), the AMD Radeon RX 6850M XT (average score 78,940, delta -1.6%), the NVIDIA Tesla P100 PCIe 12 GB (average score 79,396, delta -2.1%), and the NVIDIA Tesla P100 PCIe 16 GB (average score 79,605, delta -2.4%). The 5090 D outperforms the RX 6650M XT by 1.1% and trails the RX 6850M XT by 1.6%, though these are synthetic benchmark comparisons rather than game-specific measurements.

The GPU's 176 ROPs and 680 TMUs are well-matched to Control's rendering requirements. At 4K Ultra, the 83 FPS average suggests the GPU is compute-bound rather than memory-bound, as the 1.79 TB/s bandwidth is more than sufficient for the 32 GB frame buffer. The card's 575 W TDP and 950 W suggested PSU indicate substantial power requirements, but the measured FPS data does not include power consumption figures, so no further analysis is possible.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates across all settings. Low settings produce an average of 198 FPS, the highest measured value in the dataset. Medium settings yield 175 FPS with a minimum of 148 FPS and maximum of 201 FPS, providing the only complete FPS range data at this resolution. High settings average 168 FPS, while Ultra settings average 160 FPS. The spread from Low to Ultra at 1080p is 38 FPS, representing a 19.2% performance penalty for maximum visual quality.

At 2560x1440, the performance remains strong but shows the expected decline. Low settings average 181 FPS, which is 17 FPS lower than at 1080p. Medium settings average 159 FPS with a minimum of 135 FPS and maximum of 183 FPS, showing a 16 FPS reduction from 1080p Medium. High settings average 142 FPS, down 26 FPS from 1080p High. Ultra settings average 124 FPS, down 36 FPS from 1080p Ultra. The percentage drops from 1080p to 1440p range from 8.6% (Low) to 22.5% (Ultra), with Medium showing a 9.1% reduction.

At 3840x2160, the performance drops are more substantial. Low settings average 152 FPS, representing a 23.2% reduction from 1080p Low. Medium settings average 108 FPS with a minimum of 92 FPS and maximum of 124 FPS, marking a 38.3% reduction from 1080p Medium. High settings average 96 FPS, down 42.9% from 1080p High. Ultra settings average 83 FPS, down 48.1% from 1080p Ultra. The 4K Medium minimum of 92 FPS is the lowest minimum FPS recorded in the dataset, though it remains well above playable thresholds.

The complete dataset shows that Medium is the only setting with full minimum and maximum FPS values at all three resolutions. This suggests that Medium settings provide the most stable frame pacing, with the 1080p Medium range spanning 53 FPS (148-201), the 1440p Medium range spanning 48 FPS (135-183), and the 4K Medium range spanning 32 FPS (92-124). The narrowing range at higher resolutions indicates that the GPU becomes more consistently loaded as resolution increases, reducing frame time variance.

How This Combo Ranks

The AMD Ryzen 7 5700X3D + NVIDIA GeForce RTX 5090 D combination ranks 128th out of 2,888 tested combos in Control, placing it in the top 4.4% of all systems tested. This ranking reflects the GPU's exceptional raw performance, with the 5090 D's 92nd percentile standing among all GPUs providing the foundation for this strong result. The CPU, ranking in the 77th percentile among all CPUs with an average benchmark score of 24,709, is not the limiting factor in this pairing.

The CPU's nearest rivals in the synthetic benchmark database include the AMD Ryzen 5 7600X3D (average score 24,728, delta -0.1%), the AMD Ryzen 9 5900HX (average score 24,822, delta -0.5%), the Intel Core i5-12450HX (average score 24,576, delta 0.5%), and the Intel Core i5-11600 (average score 24,563, delta 0.6%). The 5700X3D's performance is within 0.6% of all four rivals, indicating that CPU choice has minimal impact on this combo's overall ranking in Control, given the GPU's dominance.

The GPU's nearest rivals in the synthetic benchmark database are more disparate. The AMD Radeon RX 6650M XT (average score 76,904, delta 1.1%) is slightly behind, while the AMD Radeon RX 6850M XT (average score 78,940, delta -1.6%) is slightly ahead. The NVIDIA Tesla P100 PCIe 12 GB (average score 79,396, delta -2.1%) and NVIDIA Tesla P100 PCIe 16 GB (average score 79,605, delta -2.4%) both outperform the 5090 D in synthetic benchmarks, though these are datacenter-oriented cards with different driver optimizations and are not directly comparable for gaming workloads.

The combo rank of 128 out of 2,888 is notable given that the RTX 5090 D is a recently released card with a launch date of 2025-01-29, while the Ryzen 7 5700X3D launched on 2024-01-07. The pairing of a current-generation GPU with a previous-generation CPU demonstrates that the 5700X3D's 3D V-Cache and 96 MB L3 cache provide sufficient gaming performance to avoid bottlenecking even a flagship GPU like the 5090 D. The 128th rank suggests that the 127 combos ranked above this one likely feature newer, higher-clocked CPUs, but the difference in game performance is likely minimal given the GPU-bound nature of Control at higher settings.

FAQ

Q: What is the highest average frame rate this combo achieves in Control?

A: The highest average frame rate is 198 FPS, achieved at 1920x1080 with Low settings. The maximum FPS recorded in the entire dataset is 201 FPS, observed at 1080p Medium.

Q: Can this combo handle 4K gaming in Control?

A: Yes, the combo maintains an average of 96 FPS at 4K High settings and 108 FPS at 4K Medium settings. Even at 4K Ultra, the average remains at 83 FPS, which is playable. The 4K Medium minimum FPS of 92 FPS ensures consistent performance above 60 FPS.

Q: How does the RTX 5090 D compare to its nearest GPU rivals in synthetic benchmarks?

A: The RTX 5090 D has an average benchmark score of 77,712, which is 1.1% higher than the AMD Radeon RX 6650M XT (76,904) and 1.6% lower than the AMD Radeon RX 6850M XT (78,940). The NVIDIA Tesla P100 PCIe 16 GB scores 79,605, which is 2.4% higher.

Q: What is the best setting preset for this combo at 1440p?

A: At 2560x1440, High settings provide an average of 142 FPS, which is suitable for high refresh rate monitors. Medium settings yield 159 FPS, while Ultra settings drop to 124 FPS. The choice between Medium and High depends on display refresh rate, but High is recommended for the balance of visuals and performance.

Q: Does the Ryzen 7 5700X3D bottleneck the RTX 5090 D in this game?

A: The data suggests minimal CPU bottlenecking. At 1080p Low, the combo achieves 198 FPS, and the drop to 181 FPS at 1440p Low is only 8.6%, indicating the CPU maintains high frame delivery. The CPU's 16 threads and 96 MB L3 cache provide sufficient throughput for Control's workload.

Q: How does the combo rank compared to all tested systems in Control?

A: This combo ranks 128th out of 2,888 tested combinations, placing it in the top 4.4% of all systems. The ranking reflects the GPU's 92nd percentile standing among all GPUs and the CPU's 77th percentile standing among all CPUs.