Control

Control

AVERAGE FPS
25
limited

This combination may struggle with this title, averaging 25 FPS. Consider upgrading hardware or significantly lowering settings.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 16 16 14 21
1440p QHD 18 22 26 33
1080p Full HD 25 27 35 43

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 21
3840x2160 High 16
3840x2160 Ultra 16
3840x2160 Medium 14
2560x1440 Low 33
2560x1440 Medium 26
2560x1440 High 22
2560x1440 Ultra 18
1920x1080 Low 43
1920x1080 Medium 35
1920x1080 High 27
1920x1080 Ultra 25

Control with AMD Ryzen 7 5700X3D + NVIDIA GeForce GTX 1050 Ti, In-Depth Analysis

Control is an Action Adventure title that stresses the GPU heavily, and the benchmark results for the AMD Ryzen 7 5700X3D + NVIDIA GeForce GTX 1050 Ti combination reflect a system that is severely limited by its graphics card. The data shows a configuration that struggles to maintain playable frame rates at any modern resolution, placing it in the bottom percentile of all tested combos. This pairing demonstrates a massive imbalance where a capable 8-core processor is held back by an end-of-life GPU, resulting in a gaming experience that is best suited for low-resolution, low-detail settings.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and consistent, clearly identifying the GPU as the primary bottleneck. At 1080p with Low settings, the combo achieves an average of 42.8 FPS. Moving to 1440p at the same settings, the average drops to 33.0 FPS, a significant 22.9% reduction. Pushing further to 4K (3840x2160) at Low settings yields just 20.8 FPS, which is a 35.8% decrease from the 1440p result and a 51.4% drop from the 1080p figure. This pattern of diminishing performance with increasing resolution is the classic signature of a GPU-bound scenario.

The scaling pattern intensifies at higher detail levels. With High settings, the average frame rate falls from 27.1 FPS at 1080p to 21.7 FPS at 1440p and then to 16.4 FPS at 4K. At Ultra settings, the descent is even more pronounced: 25.3 FPS at 1080p, 18.1 FPS at 1440p, and 16.1 FPS at 4K. The difference between 1440p and 4K at Ultra is only 2 FPS, suggesting that the GPU has hit a hard computational wall where additional pixels have diminishing returns because the card is already saturated. This data makes it clear that the 4 GB GTX 1050 Ti is the limiting component, and the powerful CPU has little to no influence on the frame rate as resolution climbs.

CPU Role

The AMD Ryzen 7 5700X3D is a desktop processor from the 5000 series, built on the Zen 3 architecture with the Vermeer codename. It features 8 cores and 16 threads, with a base clock of 3.00 GHz and a boost clock of 4.10 GHz. This is a modern, high-performance part that scores an 82nd percentile ranking among all CPUs. In synthetic tests, it achieves a strong Cinebench R23 multicore score of 22366 and a single-core score of 3157, indicating excellent processing power.

However, in this specific game, that processing power is largely irrelevant. The benchmark results show that the CPU is never the limiting factor. The frame rates at 1080p Low (42.8 FPS) are still far below what this CPU could theoretically push in a less demanding title. The data indicates that the GPU is saturated before the CPU can even begin to flex its muscles. The 5700X3D’s 96 MB of shared L3 cache and 16 threads provide ample headroom for game logic and physics, but the GTX 1050 Ti simply cannot render frames fast enough to take advantage of it. This is a textbook case of a CPU being wasted in a system with a mismatched, weaker GPU.

How This Combo Ranks

The combo's standing in the global database is dire. It ranks 1632 out of 1636 tested combinations for this game, placing it in the bottom 0.2% of all systems. This rank is a direct consequence of the GPU's limitations, as the CPU is a top-tier part. The GPU, by contrast, sits in the 30th percentile of all GPUs, with an average benchmark score of 5316. Its nearest rivals include the NVIDIA GeForce 930A (deltaPct 0), the NVIDIA GeForce 940M (deltaPct 0.4), and the AMD Radeon R7 240 (deltaPct 0.7), which are all entry-level or mobile-class parts.

This pairing is a mismatch of generations and capabilities. The CPU is a recent release (2024) designed for high-performance gaming, while the GPU is an end-of-life product from 2016. The result is that the combo's overall performance is dragged down to the level of much weaker systems. The data suggests that any GPU upgrade would yield a dramatic improvement in frame rates, as the CPU is ready to support a far more powerful graphics card. The 1632nd place ranking is a clear indicator that this configuration is not viable for a smooth gaming experience in Control.

Measured FPS Breakdown

The measured FPS data provides a complete picture of the system's performance across different settings and resolutions. At 1920x1080, the best average frame rate is achieved with Low settings at 42.8 FPS. This is the only setting that approaches playability. Medium settings yield 34.5 FPS, High settings drop to 27.1 FPS, and Ultra settings fall to 25.3 FPS. None of these are smooth, but Low is the least objectionable.

Stepping up to 2560x1440, the frame rates become more challenging. Low settings produce an average of 33.0 FPS, Medium produces 26.1 FPS, High produces 21.7 FPS, and Ultra produces 18.1 FPS. At this resolution, even Low settings are not comfortably playable for a fast-paced action game. At 3840x2160, the situation is even worse. Low settings manage only 20.8 FPS, High settings drop to 16.4 FPS, Ultra settings hit 16.1 FPS, and Medium settings are the lowest at 13.5 FPS. The 4K results are uniformly unplayable, regardless of the chosen detail level.

GPU Role

The NVIDIA GeForce GTX 1050 Ti is based on the Pascal architecture and the GP107 chip, manufactured on a 14 nm process. It has 768 shading units, 48 TMUs, and 32 ROPs, with a base clock of 1291 MHz and a boost clock of 1392 MHz. The card features 4 GB of GDDR5 memory on a 128-bit bus, providing a memory bandwidth of 112.1 GB/s. Its FP32 performance is rated at 2.138 TFLOPS. These are modest specifications for a modern game, and the benchmark results confirm this.

The GPU is the sole reason for the combo's poor performance. Its 4 GB of VRAM is likely insufficient for the high-resolution textures in Control, and its raw compute power is too low to maintain high frame rates. The benchmark data shows that the GPU is the bottleneck at every resolution, as evidenced by the consistent frame rate drops when increasing resolution. The card's 30th percentile ranking among all GPUs places it in the entry-level segment, and its nearest rivals are all similarly weak parts. The GTX 1050 Ti is simply outclassed by the demands of this game, making it the clear limiting factor in this system.

FAQ

Q: What is the best average frame rate this combo can achieve in Control?

A: The highest average FPS recorded is 42.8, which occurs at 1920x1080 resolution with Low settings.

Q: Is this system capable of playing Control at 1440p?

A: Not at playable frame rates. At 1440p, the best average is 33.0 FPS with Low settings, and it drops to 18.1 FPS at Ultra settings.

Q: How does the CPU's performance compare to the GPU's performance?

A: The CPU ranks in the 82nd percentile of all CPUs, while the GPU ranks in the 30th percentile of all GPUs. The CPU is a high-end part, while the GPU is entry-level.

Q: Which component is the bottleneck for this game?

A: The GPU is the clear bottleneck. Frame rates drop significantly with increasing resolution, which is a sign of GPU limitation, while the CPU has ample headroom.

Q: What is the combo's overall rank among all tested systems for this game?

A: The combination ranks 1632 out of 1636 total combos, placing it in the bottom fraction of all tested systems.

Q: How does the GTX 1050 Ti compare to its nearest rivals in benchmark scores?

A: It is essentially tied with the NVIDIA GeForce 930A (0% delta), and is only 0.4% ahead of the NVIDIA GeForce 940M and 0.7% ahead of the AMD Radeon R7 240.

Hardware Specifications

AMD Ryzen 7 5700X3D

Cores / Threads 8 / 16
Base Clock 3000 MHz
Boost Clock 4100 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce GTX 1050 Ti

VRAM 4 GB GDDR5
Base Clock —
Boost Clock 1392 MHz MHz
TDP 75 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5700X3D + NVIDIA GeForce GTX 1050 Ti in Control

Resolution Settings Avg FPS
3840x2160 Low 20.8
3840x2160 High 16.4
3840x2160 Ultra 16.1
3840x2160 Medium 13.5
2560x1440 Low 33.0
2560x1440 Medium 26.1
2560x1440 High 21.7
2560x1440 Ultra 18.1
1920x1080 Low 42.8
1920x1080 Medium 34.5
1920x1080 High 27.1
1920x1080 Ultra 25.3

Control with Ryzen 7 5700X3D + Other GPUs

See how Control performs with the same CPU but different graphics cards.

Control with GTX 1050 Ti + Other CPUs

See how Control performs with the same GPU but different processors.

Other Games with Ryzen 7 5700X3D + GTX 1050 Ti

Explore FPS benchmarks for other games using this same hardware combination.