Control
This combination provides smooth gameplay with an average of 94 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 47 | 54 | 62 | 88 |
| 1440p QHD | 71 | 82 | 94 | 133 |
| 1080p Full HD | 94 | 109 | 122 | 172 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Control with AMD Ryzen 5 5600G + AMD Radeon RX 7800 XT, In-Depth Analysis
The AMD Ryzen 5 5600G and AMD Radeon RX 7800 XT combination delivers a robust Control experience, with performance varying significantly across resolution and quality presets. The data shows a pairing where the GPU’s substantial memory and bandwidth resources are frequently the deciding factor, while the CPU provides sufficient throughput to avoid major bottlenecks in most scenarios.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 5 5600G is a 6-core, 12-thread processor based on the Zen 3 architecture, with a base clock of 3.90 GHz and a boost clock of 4.40 GHz. Its 16 MB of L3 cache and dual-channel DDR4 memory support with 51.2 GB/s of bandwidth are relevant to how it feeds the Radeon RX 7800 XT. In synthetic benchmarks, this CPU achieves a Cinebench R23 multicore score of 16758 and a single-core score of 2365, placing it in the 78th percentile of all CPUs.
The nearest rivals based on average benchmark score include the Intel Core i7-11600H, which is 0.2% ahead, and the Intel Core i7-11800H, which is 0.2% behind. This indicates the 5600G sits in a tight performance cluster. For Control, an Action Adventure title, the CPU’s 12 threads are more than adequate to manage game logic and physics. The measured frame rates show that even at 1080p Low settings, where CPU load is typically highest relative to GPU load, the combo reaches 171.6 FPS, suggesting the processor is not a limiting factor at that setting. The 3DMark max threads score of 5455 and 8-thread score of 4694 further support that the CPU can handle multi-threaded workloads without significant strain. The data indicates that the CPU’s role is to provide consistent frame pacing, allowing the GPU to be the primary driver of visual output, which is evident in the scaling of frame rates from Low to Ultra presets.
GPU Role — VRAM, clocks, and how they relate to this game's results
The AMD Radeon RX 7800 XT is the dominant component in this pairing. It features 16 GB of GDDR6 memory on a 256-bit bus, yielding 624.1 GB/s of bandwidth. Its game clock is 2124 MHz with a boost clock of 2430 MHz, and it contains 3840 shading units. The GPU’s benchmark results show a Passmark G3D score of 24176 and a Geekbench Vulkan score of 143060, placing it in the 76th percentile of all GPUs. Its nearest rivals include the AMD FirePro S9300 X2, which is 0.2% ahead, and the NVIDIA P104-100, which is 0.4% behind.
The GPU’s influence is clear when examining the measured FPS. At 1080p Ultra, the combo produces 93.5 FPS, while at 1080p Low it reaches 171.6 FPS. This 78.1 FPS difference is substantial and demonstrates that the GPU’s rendering load scales with quality settings. The 16 GB VRAM capacity is particularly relevant for Control’s high-resolution textures and complex effects. At 4K Ultra, the average FPS drops to 47, which is a significant reduction from the 93.5 FPS at 1080p Ultra. This suggests that the GPU is fully utilized at higher resolutions, with the frame rate being constrained by the GPU’s ability to process the increased pixel count and shading work. The 60 RT cores and 96 ROPs are also factors in the GPU’s ability to handle the game’s visual fidelity, though the data does not isolate their specific impact.
Settings Recommendations — which preset gives the best experience per the measured rows
The measured data provides clear guidance on settings. At 1080p, the High preset yields 109.3 FPS, which is an excellent experience for smooth gameplay. The Ultra preset at 1080p drops to 93.5 FPS, still playable but with diminishing returns. Moving to 1440p, the High preset delivers 82 FPS, which is a strong balance between visual quality and performance. The Medium preset at 1440p offers 94.4 FPS, providing a slightly higher frame rate with a modest reduction in visual fidelity.
For 4K, the data suggests that High settings are the most viable option. The High preset at 4K produces 53.6 FPS, which is close to the 60 FPS target for most displays. The Medium preset at 4K yields 61.7 FPS, which is actually superior to High and could be the preferred choice for a smoother experience. The Ultra preset at 4K drops to 47 FPS, which is below the ideal threshold for fast-paced action. Therefore, the optimal recommendation is to use High settings at 1080p or 1440p for a high-refresh-rate experience, and Medium settings at 4K to maintain frame rates above 60 FPS. The Low preset, while offering 171.6 FPS at 1080p and 87.7 FPS at 4K, sacrifices too much visual quality for this hardware combination.
How This Combo Ranks — use comboRankInGame vs other tested combos
This specific combination of the AMD Ryzen 5 5600G and AMD Radeon RX 7800 XT ranks 610th out of 1636 tested combos in Control. This places it in the upper-middle tier of all tested systems, indicating that it is a capable pairing. The ranking reflects the balance between the CPU’s mid-range performance and the GPU’s high-end capabilities. The CPU’s 78th percentile and GPU’s 76th percentile scores are relatively aligned, suggesting a well-matched system.
However, the ranking also shows that there are many combos that outperform it. The 610th position out of 1636 means that roughly 62% of tested configurations achieve higher average frame rates. This is likely due to CPUs with higher single-thread performance or GPUs with more raw compute power. The data does not provide specific rival combo scores for direct comparison, but the percentile rankings of the individual components suggest that a CPU in a higher percentile (e.g., 90th) would likely push this combo higher in the rankings. The combo’s rank is a holistic measure that incorporates all tested resolutions and settings, so the strong 1080p performance is balanced against the weaker 4K Ultra performance in the overall ranking.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The resolution scaling data is instructive for identifying the bottleneck. At High settings, the FPS drops from 109.3 at 1080p to 82 at 1440p, a decrease of 27.3 FPS or roughly 25%. From 1440p to 4K, the FPS drops from 82 to 53.6, a decrease of 28.4 FPS or about 35%. This pattern shows a consistent and significant drop as resolution increases, which is characteristic of a GPU-bound scenario. The GPU is responsible for rendering more pixels, and its performance scales accordingly.
At Low settings, the FPS drops from 171.6 at 1080p to 133.2 at 1440p, a 38.4 FPS decrease, and then to 87.7 at 4K, a 45.5 FPS drop. The absolute FPS drops are larger at Low settings because the starting frame rate is higher, but the percentage drops are similar, further confirming the GPU’s role as the primary limiter. The CPU’s performance does not change with resolution, so if the CPU were the bottleneck, the FPS would remain flat across resolutions. Since the FPS drops sharply at every resolution step, the data conclusively shows that the Radeon RX 7800 XT is the limiting component. The 16 GB VRAM is sufficient even at 4K, so the limitation is the GPU’s compute and memory bandwidth throughput, not capacity.
FAQ
Q: What is the best resolution for this combo to achieve over 100 FPS on High settings?
A: At 1920x1080 with High settings, the combo achieves 109.3 FPS. At 2560x1440 on High, it drops to 82 FPS.
Q: Does the CPU bottleneck the GPU at 4K?
A: No. The FPS drops from 53.6 at 4K High to 87.7 at 4K Low, showing the GPU’s workload scales with settings, indicating a GPU bottleneck.
Q: How does the Ryzen 5 5600G compare to its nearest rival, the Intel Core i7-11600H?
A: The Intel Core i7-11600H has an average benchmark score 0.2% higher than the Ryzen 5 5600G, indicating near-identical synthetic performance.
Q: What is the frame rate difference between Medium and Ultra settings at 1440p?
A: At 1440p, the Medium preset achieves 94.4 FPS, while the Ultra preset achieves 70.7 FPS, a difference of 23.7 FPS.
Q: Is the RX 7800 XT’s memory bandwidth sufficient for 4K gaming?
A: Yes, the 624.1 GB/s bandwidth supports 4K High at 53.6 FPS, though Ultra settings drop to 47 FPS.
Q: What is the combo’s overall rank among all tested configurations?
A: The combo ranks 610th out of 1636 tested combinations in Control.
Hardware Specifications
AMD Ryzen 5 5600G
AMD Radeon RX 7800 XT
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5600G + AMD Radeon RX 7800 XT in Control
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 87.7 |
| 3840x2160 | Medium | 61.7 |
| 3840x2160 | High | 53.6 |
| 3840x2160 | Ultra | 47.0 |
| 2560x1440 | Low | 133.2 |
| 2560x1440 | Medium | 94.4 |
| 2560x1440 | High | 82.0 |
| 2560x1440 | Ultra | 70.7 |
| 1920x1080 | Low | 171.6 |
| 1920x1080 | Medium | 121.9 |
| 1920x1080 | High | 109.3 |
| 1920x1080 | Ultra | 93.5 |
Control with Ryzen 5 5600G + Other GPUs
See how Control performs with the same CPU but different graphics cards.
Control with RX 7800 XT + Other CPUs
See how Control performs with the same GPU but different processors.
Other Games with Ryzen 5 5600G + RX 7800 XT
Explore FPS benchmarks for other games using this same hardware combination.