Barony

Barony

AVERAGE FPS
155
excellent

This combination delivers exceptional performance with an average of 155 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 51 70 82 110
1440p QHD 97 135 157 211
1080p Full HD 153 214 249 335

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 110
3840x2160 Medium 82
3840x2160 High 70
3840x2160 Ultra 51
2560x1440 Low 211
2560x1440 Medium 157
2560x1440 High 135
2560x1440 Ultra 97
1920x1080 Low 335
1920x1080 Medium 249
1920x1080 High 214
1920x1080 Ultra 153

Barony with Intel Core Ultra 9 185H + NVIDIA GeForce RTX 5070 Mobile, In-Depth Analysis

How This Combo Ranks

The Intel Core Ultra 9 185H paired with the NVIDIA GeForce RTX 5070 Mobile achieves a combo rank of 2048 out of 3717 tested combinations in Barony. This places it in the 55th percentile of tested combos, meaning it outperforms a slim majority of the other CPU-GPU pairings measured in this game, but it is not among the top-tier configurations. The ranking suggests a balanced pairing that delivers respectable but not exceptional performance. The CPU itself sits at the 85th percentile of all CPUs, while the GPU is at the 75th percentile of all GPUs, indicating both components are above-average individually, yet the combo’s aggregate position in Barony is pulled down by the game’s particular demands.

Relative to the CPU’s nearest rivals, the Core Ultra 9 185H scores nearly identically to the AMD Ryzen AI 7 PRO 350 (deltaPct -0.1), the Intel Core 7 250H (deltaPct -0.2), and the AMD Ryzen 7 PRO 5845 (deltaPct -0.4). The gap to the AMD Ryzen 7 7700X is slightly larger at -0.7 percent. These differences are negligible in real-world terms, confirming that the CPU’s average benchmark score of 35670 is right in line with its immediate competition. For the GPU, the RTX 5070 Mobile is effectively tied with the NVIDIA GeForce RTX 3070 Ti (deltaPct -0.1), slightly ahead of the RTX 2080 Ti (deltaPct 0.5), and marginally behind the AMD Radeon RX 6800 (deltaPct -0.6) and RX 6700 (deltaPct -1.7). The GPU’s average benchmark score of 29928 is within a few tenths of a percent of these rivals, confirming that the 5070 Mobile trades blows with older high-end cards.

In Barony specifically, the measured FPS data shows the combo delivering playable frame rates across most settings, but with notable drops at 4K Ultra. The combo’s mid-pack ranking is consistent with these numbers: it handles 1080p and 1440p comfortably but begins to strain at 4K with the heaviest preset. The data does not show any min FPS values for most rows, but where they exist (Medium settings across all resolutions), the worst case is a 70 FPS min at 4K Medium, which is still fluid. The overall picture is of a system that is more than capable for Barony at mainstream resolutions, but not one that dominates the high-resolution ultra- settings tier.

FAQ

Q: What is the combo’s rank among all tested systems in Barony?

A: The combo ranks 2048th out of 3717 tested combos, placing it in the 55th percentile of all pairings measured in this game.

Q: How does the CPU compare to its nearest rivals in average benchmark score?

A: The Core Ultra 9 185H scores 35670 on average, which is nearly identical to the AMD Ryzen AI 7 PRO 350 (35719, -0.1%), the Intel Core 7 250H (35728, -0.2%), and the AMD Ryzen 7 PRO 5845 (35802, -0.4%). It trails the AMD Ryzen 7 7700X (35909) by 0.7%.

Q: What is the GPU’s standing relative to its closest competitors?

A: The RTX 5070 Mobile averages 29928 in benchmarks, which is 0.1% behind the RTX 3070 Ti (29945), 0.5% ahead of the RTX 2080 Ti (29783), and 0.6% to 1.7% behind the Radeon RX 6800 (30095) and RX 6700 (30433), respectively.

Q: Which settings/resolution combination yields the highest average FPS?

A: The highest measured average FPS is 335 at 1920x1080 with Low settings. This is followed by 249 FPS at 1080p Medium and 214 FPS at 1080p High.

Q: At what point does the combo start to struggle?

A: The lowest average FPS in the measured data is 51 at 3840x2160 with Ultra settings. At 4K High, the average is 70 FPS, and at 4K Ultra it drops to 51, indicating diminishing returns at 4K with the highest preset.

Q: Are there any min FPS values recorded?

A: Yes, only for the Medium preset at all resolutions: min FPS is 211 at 1080p, 133 at 1440p, and 70 at 4K. No min FPS data exists for the Low, High, or Ultra presets.

Settings Recommendations

Based on the measured FPS rows, the best experience in Barony depends on the target resolution. At 1920x1080, every preset delivers well above the 60 FPS threshold. The Low preset produces an average of 335 FPS, Medium 249 FPS, High 214 FPS, and even Ultra hits 153 FPS. Since all settings are playable at 1080p, the recommendation is to prioritize visual quality: Ultra at 153 FPS is still very smooth, and High at 214 FPS is excellent. There is no reason to drop below High unless chasing maximum refresh rates on a very high-Hz monitor.

At 2560x1440, the story remains strong. The Low preset averages 211 FPS, Medium 157 FPS, High 135 FPS, and Ultra 97 FPS. All four presets are above 60, with Ultra still comfortably playable. For a balanced experience, High is the sweet spot: it maintains 135 FPS average while offering better graphics than Medium. If you prefer higher frame rates, Medium at 157 FPS is also excellent. Ultra at 97 FPS is acceptable, but the gap from High to Ultra is a 38 FPS drop, which may not be worth the visual gain.

At 3840x2160, the picture changes. Low averages 110 FPS, Medium 82 FPS, High 70 FPS, and Ultra drops to 51 FPS. The Ultra preset is effectively unplayable for smooth motion, falling below the typical 60 FPS target. For 4K, the recommendation is to use Medium for a solid 82 FPS average with a reported min of 70 FPS, which ensures no major stutters. High at 70 FPS is also viable, but with no min FPS data, there is some risk of dips. Low at 110 FPS is the safest for very high refresh rates, but the visual compromise is significant. In summary: 1080p settings are unrestricted, 1440p is best at High, and 4K is optimized at Medium.

Measured FPS Breakdown

The measured FPS data covers three resolutions and four settings presets (Low, Medium, High, Ultra), yielding 12 data points. At 1080p, the average FPS ranges from 335 (Low) down to 153 (Ultra). The Medium preset has a min FPS of 211 and a max of 286, while the other presets lack min/max values. The spread from Low to Ultra is 182 FPS, with each step down from Low to Medium and High to Ultra representing a gradual decrease. The 249 FPS at Medium is 86 FPS lower than Low, and 214 FPS at High is 35 lower than Medium. The Ultra drops a further 61 FPS to 153.

At 2560x1440, the same pattern persists but with lower totals. Low averages 211 FPS, Medium 157 FPS, High 135 FPS, and Ultra 97 FPS. The delta between Low and Ultra is 116 FPS. Medium has a min of 133 and a max of 181, which is a spread of 48 FPS. The High preset’s 135 FPS is 22 FPS below Medium, and Ultra is 38 FPS below High. This resolution shows that the combo can handle 1440p even at Ultra, but the step from High to Ultra is the largest relative drop (28%).

At 3840x2160, the numbers fall further. Low is 110 FPS, Medium is 82 FPS, High is 67 FPS, and Ultra is 51 FPS. The difference between Low and Ultra is 51 FPS. Medium has a min of 70 and a max of 94, a 24 FPS range. High’s 70 FPS is 14 FPS below Medium, and Ultra’s 51 is 20 FPS below High. The 4K Ultra number is the only sub-60 average in the entire dataset, and it is the only preset that fails to maintain 60 FPS.

Looking at the progression across resolutions for each preset, the scaling is not linear. For example, at Low setting, moving from 1080p to 1440p reduces FPS from 335 to 211 (a 37% drop), and further to 110 at 4K (a 67% drop from 1080p). At Medium, the drop from 1080p to 1440p is from 249 to 157 (37% again), and to 4K is 82 (67% drop). At High, 1080p is 214, 1440p is 135 (37% drop), and 4K is 70 (67% drop). At Ultra, 1080p is 153, 1440p is 97 (36.6% drop), and 4K is 51 (66.7% drop). This pattern suggests that the frame rate scaling with resolution is uniform across all presets, implying a consistent bottleneck behavior, which is discussed in the next section.

Resolution Scaling

The FPS drops from 1080p to 4K are remarkably consistent across all settings. For each preset, the average FPS at 1440p is approximately 37% lower than at 1080p, and the average at 4K is approximately 67% lower than at 1080p. For instance, at Low setting, 335 FPS at 1080p becomes 211 at 1440p (a 124 FPS loss, 37.0%), and then 110 at 4K (a further 101 FPS loss, 47.9% of the 1440p value). The same ratios hold for Medium (249→157→82), High (214→135→70), and Ultra (153→97→51).

This uniform scaling indicates that the limiting component is not changing as resolution increases. If the GPU were the bottleneck, we would expect the FPS to drop more sharply at 4K relative to 1080p, but the percentage decline is almost identical across presets. A CPU-bound scenario would show smaller FPS drops at higher resolutions, but here the drops are large. Given that the GPU is the only component that processes pixel data, and the CPU has 16 cores and 22 threads, the data suggests that the GPU is the primary constraint at all resolutions. The fact that the FPS does not halve when pixel count quadruples (from 1080p to 4K) is interesting: a pure GPU bottleneck would result in a 75% FPS reduction if the GPU were fully saturated. Here, the drop is only 67%, indicating that there is some CPU headroom that mitigates the resolution penalty, but the GPU is still the dominant factor.

The 4K Ultra result of 51 FPS is the only point below 60 FPS, and the 4K Medium min of 70 FPS is the only reported minimum that is below 100 FPS. This tells us that the GPU’s 8 GB of VRAM and 384 GB/s memory bandwidth are sufficient for 4K Medium but not for 4K Ultra, where the demands exceed the card’s capabilities. The scaling pattern also reveals that the CPU is not causing any unusual frame time spikes, as the min FPS values for Medium are relatively close to the averages (e.g., 211 min vs 249 avg at 1080p, 133 vs 157 at 1440p, 70 vs 82 at 4K). This consistency is a sign of a stable CPU-GPU interaction.

CPU Role

The Intel Core Ultra 9 185H is a 16-core, 22-thread processor with a base clock of 3.90 GHz and a boost clock of 5.10 GHz. Its L3 cache is 24 MB shared, and it supports DDR5 memory. In the synthetic benchmarks, it scores 2801.5 in Cinebench R15 multi-core, 264.5 in single-core, 10356 in R20 multi-core, 1462 in R20 single-core, 17984.5 in R23 multi-core, and 1810.5 in R23 single-core. Its Geekbench scores are 11657 multi-core and 1794 single-core. The PassMark multi-thread score is 29376, single-thread is 3697, and physics is 1956.

These numbers indicate a strong multi-threaded processor, but Barony is a roguelike that likely does not heavily utilize 16 cores. The single-core scores are also strong, which is more relevant for gaming. The fact that the FPS scaling remains uniform with resolution suggests that the CPU is not a limiting factor at any resolution; if the CPU were weak, we would see a significant FPS drop when going from 1080p to 1440p due to the CPU being overwhelmed by the extra rendering overhead. However, the percentage drops are consistent, implying that the CPU has sufficient single-thread performance to feed the GPU at all resolutions.

The CPU’s percentile of 85 among all CPUs is high, and its average benchmark score of 35670 is within 0.7% of its nearest rivals. In Barony, the game’s frame rates at 1080p Low (335 FPS) are far above what a typical CPU-limited game would show, indicating that the CPU is rarely the limiting factor. At 4K, the GPU is clearly the constraint, as the FPS drops by nearly a third from 1440p to 4K, which is a pixel-count effect. The CPU’s 22 threads (16 cores with 6 extra) allow for good background tasks, but the game’s performance is largely GPU-driven, and the CPU’s role is to maintain stable min FPS, which it does (min FPS at 1080p Medium is 211, at 1440p Medium is 133, at 4K Medium is 70). These min FPS values are not low for the respective resolutions, confirming the CPU is feeding the GPU adequately.

GPU Role

The NVIDIA GeForce RTX 5070 Mobile is a 5 nm GPU with 4608 shading units, 144 texture units, 48 ROPs, and 36 RT cores. It has 8 GB of GDDR7 memory on a 128-bit bus, with a memory bandwidth of 384.0 GB/s. Its base clock is 907 MHz and boost clock is 1425 MHz, with memory effective speed of 24 Gbps. The GPU’s benchmark scores include Geekbench OpenCL 122238, Vulkan 116960, PassMark DirectX 12 93, and PassMark G3D 20355. Its average benchmark score is 29928, and it sits at the 75th percentile of all GPUs.

In Barony, the GPU’s role is to handle the game’s voxel-based rendering and lighting effects. The 8 GB VRAM is likely sufficient for 1080p and 1440p, but at 4K Ultra, it may not be enough, as evidenced by the 51 FPS average. The memory bandwidth of 384 GB/s is moderate, and the 128-bit bus could be a limiting factor at high resolutions. The uniform FPS drops across presets suggest that the GPU is the main limiter, but the fact that 1080p High achieves 214 FPS and 1440p High achieves 135 FPS shows that the GPU still has headroom.

The GPU’s nearest rival, the RTX 3070 Ti, has a very similar average score (29945 vs 29928), and in Barony, this combo’s performance is likely comparable to a desktop RTX 3070 Ti in frame rate terms. The RTX 2080 Ti is 0.5% slower in general benchmarks, so it would be slightly behind in this game. The GPU’s 8 GB VRAM is a potential weakness for future titles, but for Barony, it is sufficient for medium settings at 4K. The boost clock of 1425 MHz is not particularly high, but the 4608 shading units and 144 texture units help.

The fact that the GPU’s TDP is only 50 W and it is an IGP (integrated graphics processor) suggests it is a mobile variant, but the performance data shows it punches above its power draw. The VRAM at 8 GB is the same as the RTX 3070 Ti, and the memory bandwidth of 384 GB/s is similar to that card, so the measured FPS aligns well with expectations. The GPU’s compute score in PassMark is 8279, which is lower than the G3D score, indicating the card is more optimized for gaming than for compute.

Overall, the GPU is the primary determinant of the FPS in Barony, especially at higher resolutions. The 4K Ultra result of 51 FPS is the only sub-60 result, and it likely reflects the 8 GB VRAM and 128-bit bus. For a roguelike like Barony, the GPU is more than adequate for 1080p and 1440p, and it can even handle 4K at Medium with an average of 82 FPS. The GPU’s performance is consistent with its benchmark scores, and its role is to render the game’s environments and effects, which it does well except at the most demanding preset.

Hardware Specifications

Intel Core Ultra 9 185H

Cores / Threads 16 / 22
Base Clock 3900 MHz
Boost Clock 5100 MHz
TDP 45W
Socket Intel BGA 2049
View Full CPU Details →

NVIDIA GeForce RTX 5070 Mobile

VRAM 8 GB GDDR7
Base Clock —
Boost Clock 1425 MHz MHz
TDP 50 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 9 185H + NVIDIA GeForce RTX 5070 Mobile in Barony

Resolution Settings Avg FPS
3840x2160 Low 110.0
3840x2160 Medium 82.0
3840x2160 High 70.0
3840x2160 Ultra 51.0
2560x1440 Low 211.0
2560x1440 Medium 157.0
2560x1440 High 135.0
2560x1440 Ultra 97.0
1920x1080 Low 335.0
1920x1080 Medium 249.0
1920x1080 High 214.0
1920x1080 Ultra 153.0

Barony with iUltra 9 185H + Other GPUs

See how Barony performs with the same CPU but different graphics cards.

Barony with RTX 5070 Mobile + Other CPUs

See how Barony performs with the same GPU but different processors.

Other Games with iUltra 9 185H + RTX 5070 Mobile

Explore FPS benchmarks for other games using this same hardware combination.