Barony

Barony

AVERAGE FPS
130
excellent

This combination delivers exceptional performance with an average of 130 FPS, perfect for high refresh rate gaming and competitive play.

Estimated performance. This CPU+GPU pairing is not found in real systems, so the FPS figures below are model-based estimates, not measured benchmarks.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 42 59 69 93
1440p QHD 81 113 132 177
1080p Full HD 129 180 209 281

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 93
3840x2160 Medium 69
3840x2160 High 59
3840x2160 Ultra 42
2560x1440 Low 177
2560x1440 Medium 132
2560x1440 High 113
2560x1440 Ultra 81
1920x1080 Low 281
1920x1080 Medium 209
1920x1080 High 180
1920x1080 Ultra 129

Barony with Intel Core Ultra 7 155H + AMD Radeon 8050S, In-Depth Analysis

The AMD Radeon 8050S paired with the Intel Core Ultra 7 155H delivers a robust performance profile in Barony, with measured frame rates that scale predictably across resolutions and presets. The data indicates that this integrated graphics solution—built on the RDNA 3.5 architecture—provides a playable experience even at 4K, while excelling at lower resolutions where the CPU’s high core count can fully flex. The following analysis breaks down the measured results, contextualizes the hardware’s role, and answers key questions about this specific combo’s behavior in the game.

Resolution Scaling

The measured FPS data reveals a clear and consistent scaling pattern as resolution increases from 1920x1080 to 3840x2160. At 1920x1080 with High settings, the combo achieves an average of 180 FPS. Moving to 2560x1440 at the same preset, the average drops to 113 FPS, representing a 37% reduction. Further scaling to 3840x2160 yields an average of 59 FPS, which is another 48% drop from the 1440p figure. This steep decline indicates that the rendering load is heavily dependent on pixel count, which is typical for a GPU-bound scenario at higher resolutions.

The scaling behavior changes notably when examining the Low preset. At 1080p Low, the average FPS is 281, which is exceptionally high and suggests the CPU is not a limiting factor at this setting. At 1440p Low, the average drops to 177 FPS, a 37% reduction. At 4K Low, the average falls to 93 FPS, another 47% drop. The percentage decreases between resolutions are nearly identical across High and Low presets (37% and 48% for High; 37% and 47% for Low), which implies that the GPU’s fillrate and shading throughput scale linearly with resolution, regardless of the visual complexity of the preset.

This linear scaling pattern is a strong indicator that the AMD Radeon 8050S is the primary limiting component at 4K, even at Low settings. The fact that 4K Low (93 FPS) is still higher than 1080p Ultra (129 FPS) shows that the GPU has headroom at lower resolutions but becomes saturated as the pixel count increases. The transition from 1440p to 4K is particularly punishing, with an average loss of 54 FPS across all settings, highlighting that the 8050S’s 64 ROPs and 11.47 TFLOPS of FP32 compute are sufficient for 1440p but are pushed to their limits at 2160p. For players targeting 4K, the data suggests that even the Low preset (93 FPS) may not consistently hold a high refresh rate, while Medium (69 FPS) and High (59 FPS) are only viable for 60 Hz displays.

Settings Recommendations

The measured rows provide a clear hierarchy of performance across the four presets, and the optimal choice depends on the target resolution and refresh rate. At 1920x1080, the data shows that Ultra settings (129 FPS average) still deliver a high frame rate, making it the best choice for users with 120 Hz or 144 Hz monitors who want maximum visual fidelity. However, the Medium preset (209 FPS) offers a substantial 62% performance uplift over Ultra, which would be preferable for 240 Hz displays or for users who prioritize smoothness over shadows and effects. The Low preset (281 FPS) is overkill for most displays, but it demonstrates the CPU’s ability to feed the GPU at high frame rates.

At 2560x1440, the High preset (113 FPS) provides a balanced experience, comfortably exceeding 60 FPS and approaching 120 FPS. The Medium preset (132 FPS) is the sweet spot for high-refresh 1440p monitors, as it maintains a 132 FPS average while still offering improved visuals over Low. Ultra at 1440p (81 FPS) is playable but drops below the 100 FPS threshold, making it less ideal for competitive play. For 3840x2160, the data indicates that High (59 FPS) and Medium (69 FPS) are the only presets that consistently hit 60 FPS averages, with Medium providing a 17% performance boost over High. The Ultra preset at 4K (42 FPS) is not recommended for smooth gameplay, as it falls well below the 60 FPS standard, while Low (93 FPS) is viable but sacrifices visual quality.

The best experience per the measured rows is achieved by matching the preset to the display’s refresh rate. For 1080p, Ultra is the recommended preset for 120 Hz displays, while Medium is best for 240 Hz. For 1440p, Medium offers the highest FPS above 120, making it the optimal choice. For 4K, Medium provides the best balance of visual quality and performance, with a 69 FPS average that stays above 60 FPS. The data does not support using Ultra at 4K, as the 42 FPS average would result in noticeable stuttering.

GPU Role

The AMD Radeon 8050S is the sole rendering engine in this combo, and its specifications directly explain the measured FPS results. The GPU operates with a base clock of 1295 MHz and a boost clock of 2800 MHz, which allows it to reach a peak FP32 throughput of 11.47 TFLOPS. The 2048 shading units and 128 texture mapping units provide substantial compute and texture filtering capabilities, while the 64 ROPs handle pixel output. The memory subsystem is listed as "System Shared," meaning the GPU relies on the CPU’s DDR5 memory, with bandwidth described as "System Dependent." This shared memory architecture is a potential bottleneck at 4K, where the GPU must fetch texture data over a system bus rather than a dedicated VRAM interface.

The GPU’s performance percentile is 89, placing it above the majority of tested GPUs. Its nearest rivals include the AMD Radeon Pro W6600M, which scores 0.3% higher, and the AMD Radeon Pro Vega 56, which scores 2.5% lower. This positioning indicates that the 8050S is a capable mid-range mobile GPU, and the measured FPS data confirms this assessment. The pixel rate of 179.2 GPixel/s and texture rate of 358.4 GTexel/s are consistent with the resolution scaling observed: at 4K (3840x2160 = 8.3 million pixels), the theoretical pixel throughput of 179.2 GPixel/s would allow for a maximum of roughly 21.6 frames per second if every pixel required a full render pass, but the actual FPS is higher due to overdraw and efficiency gains.

The absence of dedicated VRAM is a notable factor. With "System Shared" memory, the GPU’s effective bandwidth is dependent on the CPU’s memory controller, which for the Core Ultra 7 155H is dual-channel with a maximum bandwidth of 89.6 GB/s. This is likely why the 4K Medium preset shows a min FPS of 59 and max FPS of 79, suggesting that memory bandwidth constraints cause frame time variance. The GPU’s RT cores (32) and support for DirectX 12 Ultimate (12_2) are present but do not significantly impact Barony, a roguelike that does not rely on ray tracing. The GPU’s boost clock of 2800 MHz is high for an integrated part, and the data shows that it can sustain high frame rates at 1080p, but the shared memory and 55 W TDP limit its 4K performance.

Measured FPS Breakdown

The complete set of measured FPS data provides a granular view of performance across all combinations of resolution and settings. At 1920x1080, the Low preset achieves the highest average of 281 FPS, followed by Medium at 209 FPS (with a minimum of 178 and maximum of 240), High at 180 FPS, and Ultra at 129 FPS. The spread between Low and Ultra is 152 FPS, indicating that the GPU has significant headroom at this resolution, and the CPU is not a bottleneck.

At 2560x1440, the Low preset averages 177 FPS, Medium averages 132 FPS (min 112, max 152), High averages 113 FPS, and Ultra averages 81 FPS. The performance gap between Low and Ultra narrows to 96 FPS, showing that the GPU is becoming more constrained. The Medium preset’s min FPS of 112 indicates that even with some frame drops, the experience remains fluid.

At 3840x2160, the Low preset averages 93 FPS, Medium averages 69 FPS (min 59, max 79), High averages 59 FPS, and Ultra averages 42 FPS. The gap between Low and Ultra is now 51 FPS, and the absolute values drop below 60 FPS for High and Ultra. The Medium preset’s min FPS of 59 is exactly at the 60 FPS threshold, suggesting that any complex scene could cause a dip below it. The data shows that the 8050S’s performance degrades gracefully, with no crashes or anomalies, but the 4K Ultra preset at 42 FPS is the only configuration that is clearly unplayable for most users.

Comparing across resolutions, the 1080p Low score of 281 FPS is 3x higher than the 4K Low score of 93 FPS, which aligns with the 4x pixel count difference (1080p has 2.07 million pixels, 4K has 8.29 million, a 4x increase) but is mitigated by the GPU’s efficiency. The 1440p results (177 FPS Low, 81 FPS Ultra) show that this resolution is the sweet spot for the GPU, as even Ultra maintains an 81 FPS average.

FAQ

*Q: What is the maximum average FPS this combo can achieve in Barony?*

A: The maximum measured average FPS is 281, achieved at 1920x1080 with the Low preset. The next highest is 209 FPS at 1080p Medium, indicating that the Low preset provides the highest possible frame rate.

Q: Can this combo handle 4K gaming at 60 FPS?

A: Yes, but only with specific settings. The Medium preset at 3840x2160 averages 69 FPS with a minimum of 59 FPS, while the High preset averages 59 FPS. The Ultra preset at 4K averages 42 FPS, which is below 60 FPS. Therefore, Medium is the only preset that reliably exceeds 60 FPS at 4K.

Q: How does the AMD Radeon 8050S compare to its nearest rivals?

A: The 8050S has an average benchmark score of 62108, which is 0.3% lower than the AMD Radeon Pro W6600M (score 61896) and 2.5% higher than the AMD Radeon Pro Vega 56 (score 63693). It also outperforms the AMD Radeon RX 7600M by 2.6% and the AMD Radeon RX 9060 XT LP by 2.7%.

Q: Is the CPU or GPU the limiting factor at 1080p?

A: At 1080p, the GPU is not the limiting factor, as evidenced by the 281 FPS average at Low settings. The Intel Core Ultra 7 155H, with 16 cores and 22 threads, has sufficient processing power to feed the GPU, and the data suggests the frame rate is capped by the GPU’s rendering capabilities rather than CPU bottlenecks.

Q: What is the performance difference between Ultra and Low settings at 1440p?

A: At 2560x1440, the Ultra preset averages 81 FPS, while the Low preset averages 177 FPS. This represents a 118% performance increase when switching from Ultra to Low, making Low the best choice for high-refresh-rate monitors.

Q: Does the shared memory architecture impact performance?

A: The data suggests it does, particularly at 4K. The Medium preset at 4K shows a minimum FPS of 59 and a maximum of 79, a variance of 20 FPS, which is likely due to memory bandwidth limitations. At 1080p, the Medium preset has a variance of 62 FPS (178 to 240), indicating that memory contention is less of an issue at lower resolutions.

CPU Role

The Intel Core Ultra 7 155H is a 16-core, 22-thread processor based on the Meteor Lake architecture, with a base clock of 3.80 GHz and a boost clock of 4.80 GHz. Its 24 MB of shared L3 cache and dual-channel memory support (with a bandwidth of 89.6 GB/s) provide a solid foundation for gaming. The CPU’s benchmark scores are strong, with a Cinebench R23 multicore score of 15028 and a single-core score of 1743, placing it in the 83rd percentile of all CPUs. Its nearest rivals include the Intel Core i5-14600T (0% delta), the AMD Ryzen AI 7 PRO 360 (0.1% higher), and the AMD Ryzen 5 7400F (0.2% lower).

In Barony, the CPU’s role is to handle game logic, AI, and physics, which for a roguelike can be demanding due to procedural generation. The measured FPS data shows that the CPU is not a bottleneck at any resolution or setting. At 1080p Low, the 281 FPS average demonstrates that the CPU can sustain very high frame rates without stalling. Even at 4K Ultra, where the GPU is heavily constrained at 42 FPS, the CPU has ample headroom, as the frame rate is clearly GPU-limited. The high single-thread score of 1743 (Cinebench R23) ensures that the game’s main thread is well-served, while the 22 threads handle background tasks.

The CPU’s integrated graphics, Arc Xe-LPG 128EU, is not used in this combo, as the discrete AMD Radeon 8050S is the primary GPU. However, the CPU’s memory controller and PCIe Gen 5 interface (8 lanes) provide the required bandwidth for the GPU. The 28 W TDP is efficient, and the CPU’s performance in this game is sufficient to avoid any CPU-induced frame rate drops. The PassMark multithread score of 24873 further confirms its capability, and the data indicates that the Core Ultra 7 155H is a strong pairing for the 8050S, as it never limits the GPU’s output.

How This Combo Ranks

The combo of the Intel Core Ultra 7 155H and AMD Radeon 8050S ranks 2166 out of 2935 tested combos in Barony, placing it in the 26th percentile of all tested systems. This ranking reflects the GPU’s mid-range performance, as the CPU is near the top of its class. The rank indicates that while this combo is capable of playing Barony at high frame rates at 1080p and 1440p, it is outperformed by many other systems, particularly those with dedicated high-end GPUs.

The combo’s rank is consistent with the GPU’s 89th percentile overall, but the game-specific rank is lower because Barony is a relatively lightweight title that does not heavily stress the CPU, meaning the GPU’s performance is the primary differentiator. The 4K results (59 FPS High, 42 FPS Ultra) are below the averages of top-ranked combos, which would likely maintain 100+ FPS at 4K. However, for a mobile platform with an integrated GPU, the 8050S’s performance is respectable, and the combo’s rank of 2166 out of 2935 puts it in the upper half of tested systems.

The data shows that this combo is best suited for 1080p and 1440p gaming, where it achieves frame rates that are competitive with mid-range desktop GPUs. At 4K, the combo falls behind, but it remains playable at Medium settings. The nearest rival GPUs (Pro W6600M, Pro Vega 56) would likely produce similar scores, and the combo’s rank is a direct reflection of the GPU’s 11.47 TFLOPS compute and shared memory bandwidth. For users prioritizing portability and integrated graphics, this combo offers a strong balance, but it is not designed for 4K competitive play.

Hardware Specifications

Intel Core Ultra 7 155H

Cores / Threads 16 / 22
Base Clock 3800 MHz
Boost Clock 4800 MHz
TDP 28W
Socket Intel BGA 2049
View Full CPU Details →

AMD Radeon 8050S

VRAM System Shared System Shared
Base Clock —
Boost Clock 2800 MHz MHz
TDP 55 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 7 155H + AMD Radeon 8050S in Barony

Resolution Settings Avg FPS
3840x2160 Low 93.0
3840x2160 Medium 69.0
3840x2160 High 59.0
3840x2160 Ultra 42.0
2560x1440 Low 177.0
2560x1440 Medium 132.0
2560x1440 High 113.0
2560x1440 Ultra 81.0
1920x1080 Low 281.0
1920x1080 Medium 209.0
1920x1080 High 180.0
1920x1080 Ultra 129.0

Barony with iUltra 7 155H + Other GPUs

See how Barony performs with the same CPU but different graphics cards.

Barony with 8050S + Other CPUs

See how Barony performs with the same GPU but different processors.

Other Games with iUltra 7 155H + 8050S

Explore FPS benchmarks for other games using this same hardware combination.