Barony
This combination provides smooth gameplay with an average of 71 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 23 | 32 | 38 | 51 |
| 1440p QHD | 44 | 62 | 72 | 97 |
| 1080p Full HD | 70 | 98 | 114 | 153 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with AMD Ryzen 9 9950X3D + AMD Radeon RX 580, In-Depth Analysis
# Barony with AMD Ryzen 9 9950X3D + AMD Radeon RX 580
The pairing of AMD's flagship Ryzen 9 9950X3D processor with the aging Radeon RX 580 creates a striking bottleneck dynamic in Barony, a roguelike where the GPU becomes the decisive factor at higher resolutions. Benchmark data shows this combination ranks 3393rd out of 3717 tested combos in this game, placing it in the lower percentile of possible configurations. The RX 580, a Polaris 20 part from 2017 with 8 GB of GDDR5 memory on a 256-bit bus, struggles to keep pace with what the 16-core, 32-thread Ryzen 9 9950X3D can feed it, particularly as resolution scales upward.
Resolution Scaling
The measured FPS data reveals a dramatic resolution scaling curve that clearly identifies the GPU as the limiting component. At 1080p with Low settings, the RX 580 delivers 153 FPS average, which drops to 97 FPS at 1440p and then plummets to 51 FPS at 4K. That represents a 66.7% performance loss from 1080p to 4K at Low settings, a steep decline that points directly at the graphics card's inability to sustain pixel throughput at higher resolutions.
Moving to High settings tells a similar story with slightly different numbers. The 1080p High preset achieves 98 FPS average, falling to 62 FPS at 1440p and 32 FPS at 4K. The percentage drop from 1080p to 4K here is 67.3%, nearly identical to the Low preset scaling. This consistency across settings suggests the bottleneck is purely resolution-driven, not settings-driven, which is characteristic of a GPU that is maxed out on fill rate and memory bandwidth rather than shader work.
The Medium preset, which is the only one with complete min/max data, shows 114 FPS average at 1080p with a minimum of 97 FPS and maximum of 131 FPS. At 1440p Medium, the average falls to 72 FPS with a range of 61 to 83 FPS. At 4K Medium, the average drops to 38 FPS with a minimum of 32 FPS and maximum of 43 FPS. The scaling from 1080p to 4K at Medium settings is a 66.7% reduction, again consistent with the other presets.
Ultra settings produce the lowest frame rates across all resolutions. At 1080p Ultra, the average is 70 FPS; at 1440p Ultra, it falls to 44 FPS; and at 4K Ultra, the average bottoms out at 23 FPS. The 1080p-to-4K drop at Ultra is 67.1%, maintaining the same scaling pattern. This uniformity strongly indicates that the RX 580's 256.0 GB/s memory bandwidth and 42.88 GPixel/s pixel rate are the binding constraints, as the game's geometry and shading demands scale predictably with pixel count.
GPU Role
The AMD Radeon RX 580 operates with a base clock of 1257 MHz and a boost clock of 1340 MHz, with memory running at 2000 MHz (8 Gbps effective). Its 8 GB of GDDR5 memory across a 256-bit bus provides 256.0 GB/s of bandwidth. These specifications place the card in the 53rd percentile of all GPUs in the benchmark database, with an average benchmark score of 12928. The nearest rivals include the NVIDIA GeForce RTX 3050 Ti Mobile at 12940 (0.1% faster), the GTX 1660 SUPER at 12986 (0.4% faster), and the AMD Radeon 740M at 12870 (0.5% slower).
In Barony specifically, the RX 580's pixel rate of 42.88 GPixel/s and texture rate of 193.0 GTexel/s become the critical specifications. The game's roguelike nature typically involves tile-based environments with many small objects and effects, which can stress texture fetch and pixel fill operations. The card's 2304 shading units and 32 ROPs are modest by modern standards, and the 6.175 TFLOPS of FP32 compute is adequate for the game's geometry but insufficient for high-resolution rendering.
The 4K results are particularly telling. At 4K High, the RX 580 manages only 32 FPS average, which is below the threshold for smooth gameplay in most titles. Even at 4K Low, the 51 FPS average is borderline playable but far from ideal. The card's 8 GB VRAM is likely sufficient for Barony's texture requirements, as the game is not known for massive texture assets, but the bandwidth limitation becomes apparent when the pixel count quadruples from 1080p to 4K.
The GPU's DirectX 12 (12_0) support and Vulkan 1.3 compatibility mean it can run modern APIs, but the PassMark DirectX 12 score of 43 and DirectX 11 score of 60 indicate relatively weak API-specific performance. The Vulkan score of 45173 in Geekbench is more respectable, suggesting that the card may perform better with Vulkan-based rendering paths if Barony supports them.
FAQ
Q: What is the best resolution to play Barony with this hardware combo?
A: Based on the measured data, 1080p is the only resolution where all presets achieve playable frame rates. Low settings hit 153 FPS average, Medium reaches 114 FPS, High achieves 98 FPS, and even Ultra maintains 70 FPS average at 1080p.
Q: Can this setup handle 4K gaming in Barony?
A: 4K performance is marginal at best. The highest settings (Ultra) produce only 23 FPS average, High preset delivers 32 FPS, Medium reaches 38 FPS, and Low tops out at 51 FPS. Only Low settings at 4K approach playability, and even then the frame rate is below 60 FPS.
Q: How does the RX 580 compare to its nearest rival GPUs?
A: The RX 580's average benchmark score of 12928 puts it 0.1% behind the RTX 3050 Ti Mobile (12940), 0.4% behind the GTX 1660 SUPER (12986), 0.5% ahead of the Radeon 740M (12870), and 0.6% ahead of the FirePro W5100 (12847). Performance is essentially neck-and-neck with these parts.
Q: Is the Ryzen 9 9950X3D bottlenecking the RX 580 in this game?
A: The data suggests the opposite. The CPU's massive compute resources (16 cores, 32 threads, 3DMark max threads score of 17184) far exceed what the RX 580 can utilize. The resolution scaling pattern shows consistent performance drops across all presets, indicating the GPU is the limiting factor.
Q: What frame rates can I expect at 1440p?
A: At 1440p, Low settings deliver 97 FPS average, Medium achieves 72 FPS, High reaches 62 FPS, and Ultra falls to 44 FPS. The Medium preset shows a minimum of 61 FPS and maximum of 83 FPS, suggesting reasonably stable performance for most settings.
Q: How does the RX 580's memory configuration affect Barony performance?
A: The 8 GB GDDR5 memory on a 256-bit bus with 256.0 GB/s bandwidth appears sufficient for capacity but limiting in throughput. The consistent ~67% performance drop from 1080p to 4K across all settings suggests memory bandwidth becomes the primary constraint at higher resolutions.
Measured FPS Breakdown
At 1920x1080, the RX 580 delivers its strongest performance in Barony. Low settings achieve 153 FPS average, representing the highest frame rate measured in any configuration. Medium settings produce 114 FPS average with a minimum of 97 FPS and maximum of 131 FPS, providing smooth gameplay with headroom. High settings reach 98 FPS average, still comfortably above 60 FPS. Ultra settings drop to 70 FPS average, which remains playable but shows the first signs of GPU limitation.
Moving to 2560x1440, performance drops noticeably across all presets. Low settings maintain 97 FPS average, which is still smooth. Medium settings deliver 72 FPS average with a range of 61 to 83 FPS, keeping gameplay fluid in most scenarios. High settings fall to 62 FPS average, right at the edge of the 60 FPS threshold. Ultra settings drop to 44 FPS average, which may cause noticeable stuttering in fast-paced roguelike encounters.
At 3840x2160, the RX 580 clearly struggles. Low settings manage 51 FPS average, which is playable but not ideal for a game that may require quick reactions. Medium settings produce 38 FPS average with a minimum of 32 FPS and maximum of 43 FPS, indicating inconsistent performance. High settings fall to 32 FPS average, which is below acceptable smoothness. Ultra settings bottom out at 23 FPS average, making the game nearly unplayable at this configuration.
The Medium preset's complete min/max data across all three resolutions provides insight into frame time consistency. At 1080p, the spread is 97 to 131 FPS (34 FPS range). At 1440p, the spread narrows to 61 to 83 FPS (22 FPS range). At 4K, the spread tightens further to 32 to 43 FPS (11 FPS range). This narrowing range at higher resolutions indicates the GPU is consistently saturated, reducing frame time variance but also capping peak performance.
Settings Recommendations
For players prioritizing smooth gameplay, the 1080p Medium preset offers the best balance in the measured data. The 114 FPS average with a minimum of 97 FPS ensures consistent frame delivery without the risk of drops below refresh rate thresholds. The 97 FPS minimum is particularly important for a roguelike where sudden enemy spawns or effects can cause frame spikes.
At 1080p High, the 98 FPS average is still excellent, but the lack of min/max data means there is some uncertainty about worst-case performance. Given that Medium shows a 97 FPS floor, High likely stays above 60 FPS but may dip lower in intense scenes. Players who prefer visual fidelity over maximum smoothness could justify High settings at 1080p.
For 1440p users, Medium settings at 72 FPS average with a 61 FPS minimum provide the most reliable experience. The 61 FPS floor barely stays above 60 FPS, but the average of 72 FPS gives adequate headroom. High settings at 62 FPS average would work for less demanding scenarios, but the lack of min/max data makes Medium the safer choice.
At 4K, Low settings at 51 FPS average are the only viable option for playable frame rates. Medium settings at 38 FPS average may be acceptable for turn-based or slower-paced roguelike gameplay, but the 32 FPS minimum could cause issues during rapid sequences. Ultra and High settings at 4K are not recommended given the sub-35 FPS averages.
The Ultra preset provides diminishing returns across all resolutions. At 1080p, Ultra's 70 FPS average is 44 FPS lower than Medium's 114 FPS, a 38.6% performance penalty for what is typically marginal visual improvement. At 1440p, the Ultra preset's 44 FPS average falls below the 60 FPS threshold, making it unsuitable for fast-paced gameplay.
CPU Role
The AMD Ryzen 9 9950X3D is a Zen 5 architecture processor on the Granite Ridge codename, built on TSMC's 4 nm process with 16,630 million transistors across a 2x 70.6 mm² die size. It features 16 cores and 32 threads with a base clock of 4.30 GHz and boost clock of 5.70 GHz. The processor's 128 MB of L3 cache is particularly relevant for gaming workloads, providing ample capacity for Barony's procedural generation and game state data.
The CPU's benchmark scores demonstrate its exceptional compute capability. It achieves a Cinebench R23 multicore score of 42018 and a single-core score of 2259. The Geekbench multicore score of 26736 and single-core score of 3064 further confirm its dominance. In 3DMark, the processor scores 17184 at max threads, 16374 at 16 threads, 9259 at 8 threads, 4963 at 4 threads, 2549 at 2 threads, and 1292 at single-thread. This scaling from single-thread to max-threads shows excellent multi-threading efficiency.
In Barony, the CPU's role appears minimal given the GPU bottleneck. The 3DMark single-thread score of 1292 and PassMark single-thread score of 4737 indicate strong per-core performance that can handle the game's logic and physics. The 128 MB L3 cache likely reduces memory latency for game state lookups, which is beneficial for a roguelike with procedurally generated levels and numerous entity interactions.
The Ryzen 9 9950X3D's 95th percentile ranking among all CPUs, with an average benchmark score of 75779, places it in elite territory. Its nearest rivals are the AMD Ryzen 7 PRO 9755 at 75738 (0.1% slower), Ryzen 7 PRO 9755X3D at 75716 (0.1% slower), EPYC 8224P at 75582 (0.3% slower), and Intel Core Ultra 9 285 at 75488 (0.4% slower). This tight grouping at the top of the CPU hierarchy means the processor is never the limiting factor in this game.
The PassMark physics score of 5670 and floating-point math score of 159724 suggest the CPU can handle any physics calculations Barony might throw at it. The data compression score of 908421 and integer math score of 243209 indicate strong general-purpose performance that benefits game logic and procedural generation. The processor's 89.6 GB/s dual-channel DDR5 memory bandwidth provides ample data throughput for the game's memory access patterns.
Given the measured FPS data, the CPU's contribution to Barony performance is essentially unconstrained. The consistent ~67% performance drop from 1080p to 4K across all settings presets is the signature of a GPU bottleneck. The RX 580's 53rd percentile GPU ranking versus the CPU's 95th percentile ranking creates a massive imbalance that pure CPU headroom cannot compensate for at higher resolutions. Players seeking higher frame rates would need to either reduce resolution to 1080p or upgrade the graphics card to better match the CPU's capabilities.
Hardware Specifications
AMD Ryzen 9 9950X3D
AMD Radeon RX 580
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 9950X3D + AMD Radeon RX 580 in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 51.0 |
| 3840x2160 | Medium | 38.0 |
| 3840x2160 | High | 32.0 |
| 3840x2160 | Ultra | 23.0 |
| 2560x1440 | Low | 97.0 |
| 2560x1440 | Medium | 72.0 |
| 2560x1440 | High | 62.0 |
| 2560x1440 | Ultra | 44.0 |
| 1920x1080 | Low | 153.0 |
| 1920x1080 | Medium | 114.0 |
| 1920x1080 | High | 98.0 |
| 1920x1080 | Ultra | 70.0 |
Barony with Ryzen 9 9950X3D + Other GPUs
See how Barony performs with the same CPU but different graphics cards.
Barony with RX 580 + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with Ryzen 9 9950X3D + RX 580
Explore FPS benchmarks for other games using this same hardware combination.