Barony
This combination delivers exceptional performance with an average of 294 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 98 | 137 | 159 | 208 |
| 1440p QHD | 184 | 255 | 299 | 400 |
| 1080p Full HD | 293 | 407 | 472 | 614 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with AMD Ryzen 7 5700G + NVIDIA GeForce RTX 5080, In-Depth Analysis
The AMD Ryzen 7 5700G paired with the NVIDIA GeForce RTX 5080 delivers a remarkably consistent performance profile in Barony, one that is dictated almost entirely by the graphics settings rather than the resolution. The data indicates that this combination is overwhelmingly GPU-bound at lower settings, but becomes increasingly balanced as visual fidelity increases, resulting in a wide spectrum of playable frame rates.
Resolution Scaling
The performance drop from 1080p to 4K is steep but predictable, revealing a system that scales cleanly with pixel count. At Low settings, the average frame rate falls from 614.3 FPS at 1920x1080 to 208.2 FPS at 3840x2160, a reduction of roughly 66%. This pattern persists across the preset ladder; at Medium settings, the drop is from 472.1 FPS down to 158.6 FPS, and at High settings, it falls from 406.8 FPS to 136.6 FPS.
The most telling data point comes from the Ultra preset, where the 1080p result of 293.2 FPS drops to 98.4 FPS at 4K. This demonstrates that even a flagship GPU like the RTX 5080, with its 16 GB of GDDR7 memory, is subject to the brute-force demands of 4K rendering. The scaling factor between 1440p and 4K is notably larger than between 1080p and 1440p, suggesting that the memory bandwidth and pixel throughput become the limiting factors at the highest resolution. The data shows that at 4K Ultra, the system is firmly GPU-limited, while at 1080p Low, the frame rates are so high that the CPU's single-thread performance is likely the constraining element.
GPU Role
The RTX 5080 is the dominant force in this pairing, and its specifications explain the massive headroom seen at lower resolutions. With a boost clock of 2617 MHz and 10752 shading units, the GPU is capable of immense raw throughput. Its 16 GB of GDDR7 memory across a 256-bit bus provides 960.0 GB/s of bandwidth, which is sufficient to prevent memory capacity from being a bottleneck in Barony's roguelike environments, even at 4K.
The benchmark results show that the GPU's role shifts dramatically based on settings. At 1080p Low, the average FPS of 614.3 is likely hitting a ceiling imposed by the CPU rather than the GPU, indicating the graphics card is underutilized. However, as settings increase to Ultra, the GPU's workload grows, and the frame rate settles to 293.2 FPS at 1080p, which is still exceptionally high. The RTX 5080's pixel rate of 293.1 GPixel/s and texture rate of 879.3 GTexel/s are evidently more than adequate for this game's visual style, as the card only begins to struggle when pushed to 4K Ultra, where it still maintains an average of 98.4 FPS. The GPU's 89th percentile ranking among all GPUs in the database confirms its top-tier status.
CPU Role
The AMD Ryzen 7 5700G, with its 8 cores and 16 threads, provides a solid foundation for this high-end GPU. Its base clock of 3.80 GHz and boost clock of 4.60 GHz, combined with a 16 MB L3 cache, are more than sufficient to feed the RTX 5080 in most scenarios. The CPU's benchmark scores, such as a Cinebench R23 multicore score of 20755 and a single-core score of 2930, indicate strong all-around performance.
However, the data suggests that the CPU becomes the limiting factor at the lowest settings. The jump from 1080p Low at 614.3 FPS to 1440p Low at 399.7 FPS is a significant 35% drop, which is far more than the 1.78x pixel count increase would suggest. This implies that at 1080p Low, the game is hitting a CPU-bound limit, and the GPU is waiting for the processor to supply draw calls. The Ryzen 7 5700G's single-thread performance, while respectable, is the bottleneck here. In contrast, at Ultra settings, the 1080p to 1440p drop is from 293.2 FPS to 184.3 FPS, a more linear scaling that shows the GPU is now the primary constraint. The CPU's 83rd percentile ranking among all CPUs places it in a capable tier, but its performance relative to the RTX 5080 creates an imbalance at extreme frame rates.
Settings Recommendations
The measured data clearly indicates that the High preset offers the best balance of visual fidelity and performance for this combination. At 1440p High, the system achieves 254.7 FPS, which is a comfortable margin above typical high-refresh-rate monitors. At 4K High, the average of 136.6 FPS is excellent for a roguelike, providing a smooth experience without requiring any compromises.
The Ultra preset, while visually superior, exacts a heavy toll. At 4K, it drops to 98.4 FPS, which is still playable but represents a 28% performance loss compared to High. The Medium preset, on the other hand, offers diminishing returns in visual quality for a relatively modest performance gain over High; the 4K Medium result of 158.6 FPS is only 16% higher than High. The Low preset is unnecessary for this hardware, as it pushes frame rates into the 200-600 FPS range, which is far beyond what is needed for a smooth experience. The data suggests that High is the sweet spot, delivering 4K performance that is 39% faster than Ultra while maintaining a substantial visual upgrade over Medium.
How This Combo Ranks
This specific combination of the AMD Ryzen 7 5700G and NVIDIA GeForce RTX 5080 ranks 101st out of 1702 tested combos in Barony. This places the setup in the top 6% of all configurations in the database, a strong result that reflects the GPU's high-end capabilities and the CPU's sufficient support. The ranking is driven primarily by the GPU's dominance, as the RTX 5080's 89th percentile standing is significantly higher than the CPU's 83rd percentile.
The ranking indicates that while the CPU is not the absolute best match for the GPU, it does not hold the system back in a meaningful way for this specific title. The 101st place finish suggests that the combination is better than a vast majority of alternatives, but there are 100 other pairings that achieve higher average frame rates, likely featuring more powerful processors that can better exploit the RTX 5080 at lower resolutions. This pairing demonstrates that a mid-range CPU from the 5000 series can still produce top-tier results when paired with a flagship GPU in a game that is not heavily CPU-threaded.
Measured FPS Breakdown
The complete set of measured frame rates shows a consistent hierarchy across all resolutions.
At 1920x1080, the Low preset delivers 614.3 FPS, while Medium achieves 472.1 FPS. The High preset produces 406.8 FPS, and Ultra drops to 293.2 FPS. The differences between presets are substantial, with Ultra being 52% slower than Low.
At 2560x1440, the same pattern holds. Low produces 399.7 FPS, Medium achieves 299.4 FPS, and High delivers 254.7 FPS. The Ultra preset falls to 184.3 FPS. The scaling from 1080p to 1440p is roughly a 35-37% reduction across all presets, indicating consistent GPU load scaling.
At 3840x2160, the frame rates are significantly lower. Low achieves 208.2 FPS, Medium delivers 158.6 FPS, and High produces 136.6 FPS. The Ultra preset is the only one to drop below 100 FPS, with an average of 98.4 FPS. The 4K results show a 66% reduction from 1080p at Low settings, but a smaller 66% reduction at Ultra, highlighting the increasing GPU bottleneck at higher resolutions.
FAQ
Q: What is the maximum average frame rate achieved by this combo?
A: The highest measured average is 614.3 FPS, achieved at 1920x1080 with the Low preset.
Q: Can this system handle 4K gaming?
A: Yes, the data shows that at 3840x2160, the High preset delivers 136.6 FPS, and even the Ultra preset maintains 98.4 FPS.
Q: How much faster is the High preset compared to Ultra at 1440p?
A: At 2560x1440, the High preset delivers 254.7 FPS, which is 38% faster than the Ultra preset's 184.3 FPS.
Q: Is the CPU or GPU the limiting factor at 1080p Low?
A: The data suggests a CPU bottleneck, as the frame rate of 614.3 FPS at 1080p drops by 35% to 399.7 FPS at 1440p, which is a larger drop than the pixel count increase implies.
Q: What is the performance difference between Low and Ultra at 4K?
A: At 3840x2160, the Low preset achieves 208.2 FPS, while Ultra delivers 98.4 FPS, representing a 53% reduction in performance.
Q: How does the RTX 5080's benchmark ranking compare to the Ryzen 7 5700G's?
A: The GPU ranks in the 89th percentile among all GPUs, while the CPU ranks in the 83rd percentile among all CPUs, showing the GPU is the stronger component relative to its peers.
Hardware Specifications
AMD Ryzen 7 5700G
NVIDIA GeForce RTX 5080
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5700G + NVIDIA GeForce RTX 5080 in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 208.2 |
| 3840x2160 | Medium | 158.6 |
| 3840x2160 | High | 136.6 |
| 3840x2160 | Ultra | 98.4 |
| 2560x1440 | Low | 399.7 |
| 2560x1440 | Medium | 299.4 |
| 2560x1440 | High | 254.7 |
| 2560x1440 | Ultra | 184.3 |
| 1920x1080 | Low | 614.3 |
| 1920x1080 | Medium | 472.1 |
| 1920x1080 | High | 406.8 |
| 1920x1080 | Ultra | 293.2 |
Barony with Ryzen 7 5700G + Other GPUs
See how Barony performs with the same CPU but different graphics cards.
Barony with RTX 5080 + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with Ryzen 7 5700G + RTX 5080
Explore FPS benchmarks for other games using this same hardware combination.