Barony

The AMD Ryzen 5 7600 paired with the NVIDIA GeForce GTX 1650 delivers a playable but heavily GPU-bound experience in Barony, with the data showing that the graphics card is the definitive bottleneck across all resolutions. While the CPU is more than capable of feeding frames, the GTX 1650's performance ceiling limits the combo to a rank of 1654 out of 1702 tested combinations in this game.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and consistent, confirming that the GTX 1650 is the limiting component rather than the CPU. At Low settings, the average frame rate falls from 134.5 FPS at 1920x1080 to 89.1 FPS at 2560x1440, a 33.8% reduction, before dropping further to 42.6 FPS at 3840x2160 — a 68.3% decline from the 1080p baseline. This scaling pattern is typical for a GPU with a 128-bit memory bus and 128.1 GB/s of bandwidth, as higher resolutions demand more memory throughput than the card can provide.

The gap between 1440p and 4K is particularly punishing. At High settings, the transition from 2560x1440 (57.7 FPS) to 3840x2160 (27.8 FPS) cuts performance by more than half, showing that the 4 GB GDDR5 frame buffer and 2.984 TFLOPS of FP32 compute are simply insufficient for 4K rendering in this title. The resolution scaling data suggests that 1080p is the intended operating range for this combo, with 1440p possible only at lower settings, and 4K being borderline unplayable except at Low presets.

The scaling from Medium to High at each resolution is also telling. At 1080p, Medium delivers 100 FPS while High drops to 88.3 FPS, a modest 11.7% penalty. However, at 4K, the same settings transition only moves performance from 33 FPS to 27.8 FPS, indicating that the GPU is already saturated and additional settings changes have diminishing returns.

How This Combo Ranks

The combo ranks 1654th out of 1702 tested configurations in Barony, placing it in the bottom 2.8% of all combinations. This low ranking is driven entirely by the GPU, as the Ryzen 5 7600 sits in the 83rd percentile among all CPUs. The pairing of a high-tier CPU with an entry-level GPU creates a severe imbalance that the benchmark data reflects clearly.

The measured FPS results reinforce this ranking. Even at the best-case scenario — 1080p Low — the combo achieves 134.5 FPS, which is competitive but not exceptional. At 4K Ultra, the 18.7 FPS average is well below the threshold for smooth gameplay. The ranking suggests that most other tested combos in this database deliver stronger performance in Barony, likely due to more balanced CPU-GPU pairings or higher-tier graphics cards.

It is notably the combo's rank is based on measured data, not synthetic estimates. The dataIsMeasured flag confirms that these are real-world results, adding credibility to the 1654/1702 position. For a roguelike title that demands quick reaction times, this ranking indicates that users should expect to compromise heavily on visual fidelity to maintain playable frame rates.

GPU Role

The NVIDIA GeForce GTX 1650 is the primary performance limiter in this configuration. Its 4 GB of GDDR5 memory, 128-bit bus, and 128.1 GB/s bandwidth are the defining characteristics that shape the measured results. The card's base clock of 1485 MHz and boost clock of 1665 MHz provide the raw compute, but the underlying TU117 chip with 896 shading units and 32 ROPs is simply not designed for high-resolution gaming.

The GPU's 43rd percentile ranking among all GPUs and its average benchmark score of 8713 position it as a decidedly entry-level part. Its nearest rivals include the NVIDIA GeForce RTX 3050 A Mobile (avg score 8746, deltaPct -0.4%), the AMD Radeon 550X (8749, -0.4%), and the NVIDIA Quadro P2200 (8671, 0.5%). These deltas are all within 0.5% of the GTX 1650's score, confirming that this card sits in a tightly contested performance band.

The 75 W TDP and lack of power connectors indicate a card designed for low-power systems, which explains its limited performance headroom. The 12 nm process node and 4,700 million transistors on a 200 mm² die are modest by modern standards, and the 2.984 TFLOPS FP32 throughput is insufficient for demanding 4K workloads. The measured results show that the GPU's memory bandwidth becomes the critical constraint as resolution increases, with the 4 GB frame buffer causing significant performance degradation at 3840x2160.

Measured FPS Breakdown

At 1920x1080, the combo delivers its best results. Low settings produce 134.5 FPS average, Medium reaches 100 FPS, High achieves 88.3 FPS, and Ultra drops to 64.9 FPS. These numbers indicate that 1080p gaming is viable across all presets, though Ultra settings approach the edge of smooth gameplay.

Moving to 2560x1440, performance drops noticeably. Low settings yield 89.1 FPS, Medium hits 67.1 FPS, High manages 57.7 FPS, and Ultra falls to 41.5 FPS. The 1440p results suggest that only Low and Medium presets provide consistently smooth experiences, with High being borderline and Ultra requiring compromises.

At 3840x2160, the data shows severe limitations. Low settings average 42.6 FPS, Medium drops to 33 FPS, High falls to 27.8 FPS, and Ultra plummets to 18.7 FPS. These 4K numbers are largely unplayable for a roguelike that requires precise input timing, with even the lowest preset struggling to maintain 60 FPS.

The settings scaling at each resolution follows a predictable pattern: Low to Medium costs roughly 25% performance, Medium to High costs another 10-15%, and High to Ultra costs an additional 25-30%. This consistent degradation suggests that the GPU is uniformly stressed by each settings tier, with no single setting causing an anomalous performance cliff.

FAQ

Q: Can this combo run Barony at 60 FPS in 1080p?

A: Yes, at 1080p Low (134.5 FPS), Medium (100 FPS), and High (88.3 FPS) settings, the average frame rate exceeds 60 FPS. Ultra settings at 64.9 FPS also remain above the 60 FPS threshold, making 1080p playable across all presets.

Q: What is the best resolution for this combination?

A: The data indicates 1920x1080 is the optimal resolution, with all four settings presets achieving average frame rates above 60 FPS. At 2560x1440, only Low (89.1 FPS) and Medium (67.1 FPS) exceed 60 FPS, while 3840x2160 fails to reach 60 FPS on any preset.

Q: How does the GTX 1650 compare to its closest rivals?

A: The GTX 1650's average benchmark score of 8713 is within 0.5% of the NVIDIA GeForce RTX 3050 A Mobile (8746), AMD Radeon 550X (8749), and NVIDIA Quadro P2200 (8671). The performance deltas range from -0.4% to 0.5%, indicating these GPUs perform nearly identically.

Q: Is the Ryzen 5 7600 holding back the GTX 1650?

A: No, the CPU is not the bottleneck. The Ryzen 5 7600 ranks in the 83rd percentile among all CPUs with an average benchmark score of 26617, while the GPU only reaches the 43rd percentile. The frame rate drops with resolution confirm that the GPU is the limiting factor.

Q: What frame rate can I expect at 1440p Ultra?

A: At 2560x1440 with Ultra settings, the measured average frame rate is 41.5 FPS. This is below the 60 FPS threshold for smooth gameplay but may be acceptable for slower-paced sections of the roguelike.

Q: How does the combo rank among all tested configurations?

A: The combination ranks 1654th out of 1702 tested combos in Barony, placing it in the bottom 2.8% of all configurations. This low ranking is primarily due to the GPU's entry-level performance class.

Settings Recommendations

Based on the measured frame rates, the optimal settings for this combo depend on the target resolution. At 1920x1080, High settings at 88.3 FPS provide the best balance of visual quality and performance, as the 12 FPS gain from dropping to Medium (100 FPS) is less significant than the visual fidelity loss. Ultra at 64.9 FPS is also viable, but the 23.4 FPS penalty over High makes it a less attractive option.

For 2560x1440, Medium settings at 67.1 FPS are the recommended choice. Low settings (89.1 FPS) offer marginal performance gains but noticeably reduced visuals, while High (57.7 FPS) and Ultra (41.5 FPS) fall below the 60 FPS threshold. The Medium preset provides the best compromise between smoothness and visual quality at this resolution.

At 3840x2160, Low settings at 42.6 FPS are the only reasonable option, though even this does not achieve 60 FPS. The 33 FPS at Medium and 27.8 FPS at High are too choppy for a fast-paced roguelike, and Ultra at 18.7 FPS is effectively unplayable. Users seeking 4K performance would need a more powerful GPU.

CPU Role

The AMD Ryzen 5 7600 is a 6-core, 12-thread processor from the 7000 series, built on the Zen 4 architecture with a 5 nm process node. Its base clock of 3.80 GHz and boost clock of 5.10 GHz provide strong single-threaded performance, as evidenced by its Cinebench R23 single-core score of 3246 and multi-core score of 22992. The CPU's 32 MB of shared L3 cache and 83.2 GB/s memory bandwidth ensure that it is never the limiting factor in this game.

The CPU's average benchmark score of 26617 places it in the 83rd percentile of all processors, with its nearest rivals being the AMD Ryzen 7 5800X3D (26574, deltaPct 0.2%), Intel Core i9-12900HK (26672, -0.2%), AMD EPYC 8024P (26555, 0.2%), and Intel Core i9-11900K (26546, 0.3%). These deltas are all within 0.3% of the Ryzen 5 7600's score, indicating that the CPU is competitively positioned.

In the context of Barony, the CPU's role is to maintain consistent frame pacing and avoid bottlenecking the GPU. The measured data shows that the Ryzen 5 7600 easily keeps up with the GTX 1650's output, as frame rates scale predictably with resolution and settings rather than exhibiting CPU-related stutters or inconsistencies. The 12 threads and high boost clock are more than sufficient for this roguelike's workload, confirming that the GPU is the sole performance constraint in this pairing.