Barony

The pairing of AMD’s Ryzen 5 5600G with NVIDIA’s GeForce RTX 5090 D presents a curious case of extreme generational and tier disparity. The data reveals a system capable of extraordinary frame rates in Barony, but the performance scaling patterns expose a fascinating dynamic between a 6-core Zen 3 processor and a flagship Blackwell GPU. This analysis examines the measured FPS rows to determine which component truly dictates the experience at various resolutions and settings.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

Observing the measured data, the performance drop from 1080p to 4K is dramatic but not uniform across settings, offering clear insight into where bottlenecks emerge. At High settings, the average FPS falls from 462 at 1920x1080 to 292 at 2560x1440, a reduction of 170 FPS, before settling at 152 at 3840x2160. This trajectory shows that while the GPU is being pushed harder at higher resolutions, the CPU is still keeping pace to allow for these massive frame rates.

The Low settings data tells an even more revealing story. At 1080p Low, the system achieves a staggering 593 FPS average. Dropping to 1440p Low yields 457 FPS, and 4K Low still manages 239 FPS. The fact that 1080p Low cannot break the 600 FPS barrier suggests a hard ceiling imposed by the processor’s single-thread throughput, as the RTX 5090 D is clearly capable of far more work than this frame rate demands. This is a classic sign of a CPU-bound scenario at the lowest resolution.

Medium settings provide the most complete picture with min and max FPS values. At 1080p Medium, the average is 531 FPS with a minimum of 452, indicating that even when the GPU is under more load, the CPU can still feed it enough data to avoid severe frame time spikes. Scaling up to 1440p Medium drops the average to 340 FPS, and 4K Medium brings it to 178 FPS. The scaling factor from 1080p to 4K at Medium is roughly 3x slower, which aligns closely with the pixel count increase, suggesting a transition from CPU dominance to GPU dominance as resolution climbs.

At Ultra settings, the frame rates are the lowest across the board, with 331 FPS at 1080p, 209 FPS at 1440p, and 109 FPS at 4K. This is where the RTX 5090 D’s raw power is most evident, as the gap between 1080p and 1440p narrows to a 122 FPS difference, and the 4K figure remains comfortably above 60 FPS. The data implies that the Ryzen 5 5600G is the primary limiter at 1080p and 1440p, particularly on Low and Medium presets, while the 4K results show the GPU finally becoming the significant factor in determining performance.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 5600G brings 6 cores and 12 threads based on the Zen 3 architecture, with a base clock of 3.90 GHz and a boost clock of 4.40 GHz. These specifications, combined with a 16 MB L3 cache, define its capability to process game logic and draw calls. In a roguelike such as Barony, the CPU’s single-thread performance is often critical for handling the simulation and entity updates, and this processor’s 3dmark_single_thread score of 872 and passmark_single_thread score of 3177 suggest a solid foundation for high frame rates.

The benchmark results for this CPU place it in the 74th percentile among all tested processors, with an average benchmark score of 21088. Its nearest rivals include the Intel Core i3-1220P with a deltaPct of 0.1 and the Intel Core Ultra 7 256V with a deltaPct of -0.1, indicating that the 5600G sits in a crowded performance tier. However, the measured FPS in Barony shows it driving frame rates that far exceed what typical CPUs in this class would manage, solely because the RTX 5090 D is able to render frames so quickly that the CPU’s limits are only reached at extreme frame rates.

The Cinebench R23 multicore score of 10551 and Geekbench multicore score of 8428 highlight that this is not a high-end workstation chip, but its 12 threads are sufficient for a game that likely does not scale perfectly across many cores. The data suggests that the CPU’s 4.40 GHz boost clock is the key enabler for the high FPS values seen at 1080p, as the single-core performance allows for rapid frame generation. The 7 nm process node and 65 W TDP indicate an efficient design, but the architecture is dated compared to the GPU’s Blackwell 2.0 design, creating a significant imbalance in theoretical throughput.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 5090 D is a monolithic powerhouse with 32 GB of GDDR7 memory on a 512-bit bus, providing a bandwidth of 1.79 TB/s. Its boost clock of 2407 MHz and 21760 shading units give it immense raw compute capability, reflected in its passmark_g3d score of 44065 and 3dmark_steel_nomad_dx12 score of 14326. This GPU sits in the 92nd percentile of all tested GPUs, with an average benchmark score of 77712, placing it ahead of rivals like the AMD Radeon RX 6850M XT by a deltaPct of -1.6.

In Barony, the GPU’s role becomes more pronounced as resolution increases. The 32 GB VRAM is far more than this game would ever require, but the sheer fill rate and pixel throughput allow for the high average FPS observed. At 4K Ultra, the GPU achieves 109 FPS, which reflects its ability to handle the increased pixel count without becoming a severe bottleneck. The 104.8 TFLOPS FP32 performance and 423.6 GPixel/s pixel rate are the specifications that enable this consistent performance.

The benchmark results show the GPU’s nearest rivals include the NVIDIA Tesla P100 PCIe 12 GB with a deltaPct of -2.1, which is a professional-grade card, highlighting how far ahead the RTX 5090 D is in the consumer space. However, the data in Barony reveals that the GPU is often underutilized, especially at 1080p Low where the 593 FPS average is likely constrained by the CPU. The GPU’s 575 W TDP and 950 W suggested PSU indicate its power requirements, but the performance it delivers at 4K justifies this for enthusiasts seeking maximum frame rates in this roguelike.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combination of the AMD Ryzen 5 5600G and NVIDIA GeForce RTX 5090 D achieves a combo rank of 48 out of 2935 tested combos in Barony. This places it in the top 1.6% of all system configurations tested, which is an impressive feat given the CPU’s mid-range positioning. The rank suggests that despite the potential CPU bottleneck, the overall system performance is exceptionally high due to the GPU’s dominance.

This ranking is notable because the CPU’s individual percentile is only 74, while the GPU sits at 92. The combination’s rank of 48 indicates that the GPU’s strengths more than compensate for the CPU’s limitations in this specific game. The data implies that for a roguelike like Barony, which may not be heavily multithreaded, the 6-core CPU is sufficient to allow the RTX 5090 D to shine.

Compared to other combos, this pairing outperforms the vast majority of systems, likely including those with more balanced CPU-GPU pairings. The high rank is driven by the exceptional 1080p and 1440p results, where the GPU’s raw speed pushes frame rates to levels that most CPUs would bottleneck. The fact that this combo ranks 48th overall suggests that only a handful of systems with even faster CPUs or more optimized configurations can beat it, making it a top-tier choice for high-refresh-rate gaming in Barony.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured FPS data, the Medium preset offers the most balanced experience across all resolutions. At 1080p Medium, the average FPS of 531 with a minimum of 452 and maximum of 611 shows excellent consistency, ensuring smooth gameplay without the risk of significant frame drops. This is the sweet spot where the CPU and GPU work in harmony, providing high frame rates without pushing the CPU to its absolute limit.

For 1440p gaming, the Medium preset again proves optimal with an average of 340 FPS, a minimum of 289, and a maximum of 391. These figures indicate that the system can maintain high refresh rates on capable monitors, and the minimum FPS staying above 240 suggests a fluid experience even in demanding scenes. The High preset at 1440p drops to 292 FPS average, which is still excellent, but Medium offers a safer margin for consistent performance.

At 4K, the Medium preset yields 178 FPS average with a minimum of 151 and maximum of 204, which is more than sufficient for any high-refresh-rate 4K display. The High preset at 4K delivers 152 FPS, which is also viable, but Ultra drops to 109 FPS, which may be preferred for visual fidelity on slower panels. The data suggests that Medium is the recommended choice for players prioritizing frame rate consistency, while Ultra is only advisable for those with 60 Hz displays who want maximum visual quality.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the maximum average FPS this combo achieves in Barony?

A: The highest average FPS recorded is 593, achieved at 1920x1080 resolution with Low settings.

Q: How does the combo rank compare to other tested configurations?

A: This combo ranks 48th out of 2935 total tested combos in Barony, placing it in the top 1.6% of all systems.

Q: What is the performance difference between Low and Ultra settings at 4K?

A: At 3840x2160, the Low preset averages 239 FPS, while the Ultra preset averages 109 FPS, representing a significant 130 FPS drop for higher visual quality.

Q: Is the CPU or GPU more likely to be the bottleneck at 1080p?

A: The data indicates the CPU is the primary limiter at 1080p, as the frame rates cap at 593 FPS on Low settings, which is far below the GPU’s potential output.

Q: What are the minimum FPS figures for the Medium preset at each resolution?

A: The Medium preset shows minimum FPS of 452 at 1080p, 289 at 1440p, and 151 at 4K.

Q: What is the GPU’s percentile ranking among all tested GPUs?

A: The NVIDIA GeForce RTX 5090 D is in the 92nd percentile of all tested GPUs, with an average benchmark score of 77712.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

At 1920x1080, the system delivers its highest frame rates across all settings. The Low preset achieves an average of 593 FPS, the Medium preset averages 531 FPS with a minimum of 452 and maximum of 611, the High preset averages 462 FPS, and the Ultra preset averages 331 FPS. These figures demonstrate that at this resolution, the CPU is the limiting factor, as even the most demanding Ultra setting still produces over 300 FPS.

Moving to 2560x1440, the performance scales down but remains exceptionally high. The Low preset averages 457 FPS, the Medium preset averages 340 FPS with a minimum of 289 and maximum of 391, the High preset averages 292 FPS, and the Ultra preset averages 209 FPS. The drop from 1080p to 1440p is roughly 20-30% across settings, showing that the GPU is starting to take on more work while the CPU still provides sufficient headroom.

At 3840x2160, the GPU’s workload becomes the dominant factor. The Low preset averages 239 FPS, the Medium preset averages 178 FPS with a minimum of 151 and maximum of 204, the High preset averages 152 FPS, and the Ultra preset averages 109 FPS. The scaling from 1440p to 4K is more pronounced, with the Ultra setting dropping below 120 FPS, indicating that the RTX 5090 D is finally being pushed to its limits. The data shows that even at 4K Ultra, the system maintains playable frame rates, but the Medium preset offers the best balance of visual quality and performance for high-refresh-rate displays.