Archeage

Archeage

AVERAGE FPS
31
playable

This combination offers playable performance with an average of 31 FPS, though you may want to lower settings for smoother gameplay.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 10 14 21 24
1440p QHD 17 25 37 41
1080p Full HD 25 37 55 62

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 24
3840x2160 Medium 21
3840x2160 High 14
3840x2160 Ultra 10
2560x1440 Low 41
2560x1440 Medium 37
2560x1440 High 25
2560x1440 Ultra 17
1920x1080 Low 62
1920x1080 Medium 55
1920x1080 High 37
1920x1080 Ultra 25

Archeage with Intel Core Ultra 5 235 + NVIDIA GeForce GTX 1650, In-Depth Analysis

Archeage is a 2014 MMORPG that remains sensitive to both CPU and GPU load, and the pairing of the Intel Core Ultra 5 235 with the NVIDIA GeForce GTX 1650 produces a predictable, GPU-bound experience at higher resolutions. The measured frame rates show a clear pattern: this combo is playable at 1080p on lower presets, but struggles to maintain smooth gameplay at 1440p and becomes effectively unplayable at 4K. The data indicates that the GTX 1650, which sits at the 40th percentile among all GPUs, is the primary bottleneck in almost every scenario, while the Core Ultra 5 235, ranking at the 89th percentile among all CPUs, has ample headroom for this title.

Resolution Scaling

The frame rate drops from 1080p to 4K are steep and consistent across all settings presets, revealing a classic GPU-limited scenario. At 1080p Low, the combo averages 62 FPS, but at 1440p Low, that figure falls to 41 FPS, a 34% reduction. Moving to 4K Low drops the average further to 24 FPS, which is a 61% reduction from the 1080p result. This scaling behavior is typical of a GPU that is running out of pixel throughput and memory bandwidth as the resolution increases.

The pattern holds for Medium settings, where 1080p averages 55 FPS, 1440p drops to 37 FPS (a 33% reduction), and 4K falls to 21 FPS (a 62% reduction from 1080p). High settings show a similar trajectory: 37 FPS at 1080p, 25 FPS at 1440p (down 32%), and 14 FPS at 4K (down 62%). The consistency of these percentage drops across presets strongly suggests that the limiting component is the graphics card, not the processor or memory subsystem.

Ultra settings present the worst-case scenario, with 1080p averaging 25 FPS, 1440p at 17 FPS (down 32%), and 4K at just 10 FPS (down 60%). The fact that the scaling percentages are nearly identical across all four presets—hovering around 32-34% for the 1080p to 1440p step and 60-62% for the 1440p to 4K step—confirms that resolution, not settings complexity, is the dominant factor limiting performance.

This data indicates that the GTX 1650's 4 GB of GDDR5 memory and 128-bit bus are insufficient for the demands of 4K rendering in Archeage. The 128.1 GB/s of memory bandwidth becomes a severe constraint at higher pixel counts. For a practical build, 1080p is the intended operating range for this combo; 1440p is playable only on Low settings with reduced expectations, and 4K should be avoided entirely unless the user accepts sub-25 FPS averages.

GPU Role

The NVIDIA GeForce GTX 1650 is a Turing-architecture part with 896 shading units, 56 texture mapping units, and 32 raster output units. Its base clock of 1485 MHz and boost clock of 1665 MHz are modest by modern standards, and the 2.984 TFLOPS of FP32 compute performance places it firmly in the entry-level segment. The benchmark data shows that this GPU sits at the 40th percentile of all GPUs, with an average benchmark score of 7472, putting it in direct competition with the AMD Radeon HD 8850M, Intel UHD Graphics 750, and AMD Radeon R7 350, all of which are within 0.6% of its score.

In Archeage, the GPU's role is decisive. The measured FPS at 4K Ultra (10 FPS) versus 1080p Low (62 FPS) represents a sixfold difference, which is far larger than what the CPU alone could produce. The 4 GB VRAM capacity is a significant limitation; at 4K with High or Ultra settings, the card likely exceeds its memory buffer, causing severe frame drops. The data shows that even at 1080p Ultra, the average FPS falls to 25, which is only 40% of the 1080p Low result, indicating that the GPU's shading and texture units are overwhelmed by the higher settings.

The GTX 1650's memory clock of 2001 MHz (8 Gbps effective) combined with the 128-bit bus yields 128.1 GB/s of bandwidth. This is a reasonable figure for 1080p gaming but becomes a bottleneck at higher resolutions. The measured frame times, with 1440p Medium showing a min FPS of 31 and max of 42, suggest that the card is operating at its limits, with frame pacing issues likely appearing in crowded MMORPG scenes. The GPU's 75 W TDP and lack of power connectors make it a low-power option, but that efficiency does not translate to high-end performance in this title.

FAQ

Q: Can this combo run Archeage at 4K?

A: Technically yes, but not playably. The highest 4K average is 24 FPS on Low settings, and Ultra drops to 10 FPS. The data shows that 4K is only viable for screenshots or very light use, not for actual gameplay.

Q: What is the best resolution for this CPU-GPU pairing?

A: 1920x1080 is the only resolution where the combo achieves consistently playable frame rates. The 1080p Low preset averages 62 FPS, and Medium averages 55 FPS, which are the only two configurations above the 60 FPS threshold.

Q: How does the GTX 1650 compare to its nearest rivals in this game?

A: The GTX 1650's average benchmark score of 7472 is 0.3% higher than the AMD Radeon HD 8850M and 0.4% higher than the Intel UHD Graphics 750, but 1% lower than the Intel Arc A310. These are all within a tight performance band, so the 1650 does not offer a significant advantage over its closest competitors.

Q: Is the Core Ultra 5 235 holding back the GTX 1650?

A: No, the CPU has far more performance than the GPU can utilize. The Core Ultra 5 235 scores 14769 in Cinebench R23 multicore, which places it at the 89th percentile of all CPUs, while the GPU is at the 40th percentile. The frame rates are consistently GPU-bound.

Q: What settings preset should I use at 1440p?

A: Only Low settings are viable, with an average of 41 FPS. Medium drops to 37 FPS, High to 25 FPS, and Ultra to 17 FPS. The data suggests that 1440p Low is the maximum playable configuration, and even then, expect occasional dips in heavy combat.

Q: Does the GTX 1650's 4 GB VRAM matter for Archeage?

A: Yes, it likely causes the severe performance drop at 4K. The 4 GB frame buffer is inadequate for 4K textures and effects, which is why the 4K High preset only averages 14 FPS while 1080p High averages 37 FPS.

Measured FPS Breakdown

The measured data provides a complete picture of performance across three resolutions and four settings presets. At 1920x1080, the combo achieves its best results: Low averages 62 FPS, Medium averages 55 FPS with a minimum of 47 and maximum of 63, High averages 37 FPS, and Ultra averages 25 FPS. The only preset that breaks the 60 FPS barrier is Low, which is playable but visually sparse.

At 2560x1440, the performance drops significantly. Low averages 41 FPS, Medium averages 37 FPS with a minimum of 31 and maximum of 42, High averages 25 FPS, and Ultra averages 17 FPS. None of these configurations reach 60 FPS, and only Low and Medium approach what most players would consider acceptable for an MMORPG, though the min FPS figures suggest stuttering in demanding scenes.

At 3840x2160, the results are mostly unusable. Low averages 24 FPS, Medium averages 21 FPS with a minimum of 18 and maximum of 24, High averages 14 FPS, and Ultra averages 10 FPS. The gap between Low and Ultra at 4K is only 14 FPS, which indicates that the GPU is so overwhelmed that settings changes have diminishing returns.

The frame time data for Medium settings shows a consistent pattern: at 1080p, the range is 47-63 FPS, at 1440p it narrows to 31-42 FPS, and at 4K it tightens to 18-24 FPS. This compression of the frame rate range as resolution increases further confirms that the GPU is the limiting factor, as it cannot maintain higher peak frame rates even when the scene is simple.

CPU Role

The Intel Core Ultra 5 235 is a 14-core, 14-thread processor based on the Arrow Lake architecture, built on a 3 nm process by TSMC. It has a base clock of 3.40 GHz and a boost clock of 5.00 GHz, with 24 MB of shared L3 cache. The CPU's benchmark results are strong: it scores 14769 in Cinebench R23 multicore and 2085 in single-core, with a Passmark multithread score of 37816 and a single-thread score of 4516. This places it at the 89th percentile of all CPUs, with an average benchmark score of 46062.

In Archeage, the CPU's role is secondary to the GPU. The game is not particularly demanding on processors, and the Core Ultra 5 235 has far more compute headroom than the GTX 1650 can feed. The CPU's nearest rivals—the AMD Ryzen AI 9 HX 375, Intel Core i9-13900HX, AMD EPYC 4364P, and AMD EPYC 7303—are all within 0.2% of its average score, meaning that swapping to any of these would not change the frame rates in this game, as the GPU would still be the bottleneck.

The CPU's 14 cores and 14 threads (no hyperthreading) are sufficient for Archeage's MMO workloads, which typically involve a few heavily loaded threads for game logic and rendering, plus background tasks for networking and audio. The high single-thread performance of 2085 in Cinebench R23 is more relevant than the multicore score, as MMO performance often depends on single-threaded frame rendering. The 5.00 GHz boost clock ensures that the CPU can keep up with the GTX 1650's output at 1080p, but at higher resolutions, the CPU is effectively idle relative to the GPU's workload.

The data confirms that the CPU is not a limiting factor. The consistent frame rate drops across resolutions mirror the GPU's scaling characteristics, not the CPU's. If the CPU were the bottleneck, we would see less variance between 1080p and 4K results, but the 62 FPS to 24 FPS drop at Low settings is entirely attributable to the GPU's inability to render at higher pixel counts.

Settings Recommendations

Based on the measured data, the optimal configuration for this combo is 1920x1080 with Medium settings, which averages 55 FPS with a minimum of 47 FPS. This offers a balance between visual quality and smoothness, staying above the 30 FPS minimum that most players consider playable for an MMORPG. The Medium preset at 1080p is the highest settings level that maintains an average above 50 FPS.

For players who prioritize frame rate over visuals, 1080p Low is the best choice, averaging 62 FPS and providing a smooth experience in crowded areas. This is the only configuration that consistently exceeds 60 FPS, which is important for competitive play or for users with high refresh rate monitors. The jump from Low to Medium costs only 7 FPS on average (62 to 55), so Medium is a worthwhile upgrade if the user can tolerate the slight reduction in smoothness.

At 1440p, the only acceptable preset is Low, averaging 41 FPS. This is playable for casual exploration and questing, but the minimum frame rates are likely to dip below 30 FPS in large-scale battles, which could cause frustration. Medium at 1440p (37 FPS) is not recommended, as the 4 FPS gain from Low is negligible, but the visual improvement is minimal at this resolution on a 4 GB GPU.

The 4K resolution should be avoided entirely. Even the highest average of 24 FPS at Low settings is below the threshold for comfortable gameplay, and the Ultra preset at 10 FPS is unplayable. If a user must run at 4K, Low settings are the only option, but the experience will be marred by frequent stuttering and low frame rates.

In summary, the data recommends 1080p Medium as the default setting for this pairing, with 1080p Low as a fallback for high-refresh-rate play. The Ultra preset is not viable at any resolution, as the 1080p Ultra average of 25 FPS is worse than 1440p Medium, and the visual benefits do not justify the performance cost. This combo is best suited for 1080p gaming, and users should not expect to leverage the Core Ultra 5 235's full potential in Archeage, as the GTX 1650 is the definitive performance ceiling.

Hardware Specifications

Intel Core Ultra 5 235

Cores / Threads 14 / 14
Base Clock 3400 MHz
Boost Clock 5000 MHz
TDP 65W
Socket Intel Socket 1851
View Full CPU Details →

NVIDIA GeForce GTX 1650

VRAM 4 GB GDDR5
Base Clock —
Boost Clock 1665 MHz MHz
TDP 75 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 5 235 + NVIDIA GeForce GTX 1650 in Archeage

Resolution Settings Avg FPS
3840x2160 Low 24.0
3840x2160 Medium 21.0
3840x2160 High 14.0
3840x2160 Ultra 10.0
2560x1440 Low 41.0
2560x1440 Medium 37.0
2560x1440 High 25.0
2560x1440 Ultra 17.0
1920x1080 Low 62.0
1920x1080 Medium 55.0
1920x1080 High 37.0
1920x1080 Ultra 25.0

Archeage with iUltra 5 235 + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with GTX 1650 + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with iUltra 5 235 + GTX 1650

Explore FPS benchmarks for other games using this same hardware combination.