Archeage
This combination delivers exceptional performance with an average of 124 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 40 | 58 | 85 | 96 |
| 1440p QHD | 69 | 101 | 149 | 167 |
| 1080p Full HD | 103 | 150 | 221 | 249 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 7 9700F + NVIDIA GeForce RTX 4070 Ti SUPER, In-Depth Analysis
ArcheAge, a 2014 MMORPG, remains a demanding title for modern hardware, particularly due to its large-scale world and complex rendering. This analysis examines the performance of the AMD Ryzen 7 9700F paired with the NVIDIA GeForce RTX 4070 Ti SUPER across a range of resolutions and settings. The data reveals a configuration that scales predictably, with CPU limitations becoming apparent at lower resolutions and GPU constraints dominating at 4K.
Resolution Scaling
The performance delta from 1080p to 4K is substantial and clearly illustrates the shifting bottleneck between the CPU and GPU. At 1080p with Low settings, the system achieves an average of 249 FPS, which is a very high frame rate typical of a CPU-bound scenario in an older MMORPG. Moving to 2560x1440 at the same Low preset, the average drops to 167 FPS, a significant 33% reduction. At 4K with Low settings, the average falls further to 96 FPS. This progression shows that as resolution increases, the GPU's rendering workload grows, and the frame rate becomes less dependent on the CPU's single-thread performance.
The scaling pattern for High settings is similar but with a more pronounced drop at the top end. At 1920x1080 High, the average is 150 FPS, which drops to 101 FPS at 2560x1440 High and then to 58 FPS at 3840x2160 High. The 4K High result is particularly telling, as it suggests the GPU is struggling to maintain fluid frame rates at this high fidelity. The gap between 1080p and 1440p is roughly 33%, while the gap between 1440p and 4K is roughly 43%, indicating a non-linear scaling that points to the GPU becoming the primary limiting factor at 4K, especially with higher graphical presets.
The most extreme example of this bottleneck shift is seen in the Ultra preset. At 1080p Ultra, the system averages 103 FPS, which is a playable frame rate. However, at 1440p Ultra, this drops to 69 FPS, and at 4K Ultra, it plummets to just 40 FPS. The 4K Ultra result is the lowest score in the entire dataset and indicates that this combination is not suitable for maximum settings at 4K. The data suggests that for 4K gaming, users should consider High or Medium settings to stay within a comfortable frame rate range, as the RTX 4070 Ti SUPER begins to show its limits when pushed to extreme resolutions and quality levels simultaneously.
CPU Role
The AMD Ryzen 7 9700F is an 8-core, 16-thread processor based on the Zen 5 architecture, with a base clock of 3.80 GHz and a boost clock of 5.50 GHz. In a game like ArcheAge, which is not known for utilizing many cores, the CPU's strong single-thread performance is critical. The PassMark single-thread score of 4691 is a key indicator here. This high single-thread capability is what allows the system to reach 249 FPS at 1080p Low, a scenario where the GPU is barely taxed and the CPU must feed frames as quickly as possible.
The CPU's role becomes less dominant as resolution increases. When the GPU is tasked with rendering more pixels, the frame rate drops, giving the CPU more headroom. For instance, at 4K Ultra, the average FPS is 40, which is far below the CPU's maximum output capability. This confirms that at 4K, the CPU is not the bottleneck; the GPU is. The benchmark data supports this by showing a clear divergence in performance scaling that aligns with GPU load.
Comparing the 9700F to its nearest rivals, it sits in a tight performance cluster. The data shows it is 0.2% faster than the AMD Ryzen 9 7940HX and 0.7% faster than the AMD Ryzen 9 7950X, while being 0.2% slower than the Intel Core i7-14700KF and 0.9% slower than the Intel Core i7-14700K. These deltas are negligible in real-world gaming, particularly at higher resolutions where the GPU dominates. The 9700F's 32 MB of shared L3 cache and dual-channel DDR5 memory support provide sufficient bandwidth for this workload, ensuring that the CPU does not starve the GPU of data in most scenarios.
FAQ
Q: What is the best resolution for high refresh rate gaming with this setup?
A: At 1920x1080, the system delivers an average of 249 FPS on Low and 150 FPS on High, making it ideal for 144Hz or even 240Hz monitors. At 2560x1440, the average on High is 101 FPS, which remains suitable for 100Hz+ displays.
Q: Can this system handle 4K gaming?
A: Yes, but with compromises. At 3840x2160, the average FPS is 96 on Low and 58 on High. For a more consistent 60 FPS experience, the Medium preset, which averages 85 FPS, is a better choice. The Ultra preset at 4K is not recommended, as it averages only 40 FPS.
Q: How does the CPU affect performance in ArcheAge?
A: The Ryzen 7 9700F's strong single-thread performance, evidenced by its PassMark score of 4691, is crucial for high frame rates at lower resolutions. At 1080p Low, the system hits 249 FPS, indicating the CPU is capable of handling the game's logic and draw calls, but this becomes less relevant at 4K where the GPU is the limiting factor.
Q: What is the performance difference between the Medium and High presets?
A: The difference is significant. At 1080p, Medium averages 221 FPS, while High averages 150 FPS, a 47% difference. At 1440p, Medium averages 149 FPS versus 101 FPS for High. At 4K, Medium averages 85 FPS versus 58 FPS for High. The jump to High settings has a substantial impact on frame rate.
Q: Is the Ultra preset worth the performance cost?
A: No. The data shows a massive drop in performance when switching from High to Ultra. At 1080p, the average FPS falls from 150 to 103. At 1440p, it falls from 101 to 69. At 4K, it falls from 58 to 40. The visual fidelity gains may not justify the frame rate losses, especially at higher resolutions.
Q: How does this system compare to others in the benchmark database?
A: The combo of the Ryzen 7 9700F and RTX 4070 Ti SUPER ranks 270th out of 2761 tested combinations for ArcheAge. The GPU itself performs 0.4% below the NVIDIA Quadro M5000 and 1.9% below the NVIDIA TITAN RTX in average benchmark scores, indicating a mid-to-high tier placement among all tested GPUs.
Measured FPS Breakdown
This section provides a detailed look at the average frame rates recorded for each resolution and settings preset.
1920x1080 (1080p):
- Low: The average FPS is 249. This is the highest score in the entire dataset and represents a CPU-bound scenario.
- Medium: The average FPS is 221, with a minimum of 188 and a maximum of 255. This shows a slight dip from Low but remains extremely high.
- High: The average FPS drops to 150. This is a significant step down from Medium, indicating a heavier GPU load.
- Ultra: The average FPS is 103. This is the lowest score at 1080p but remains perfectly playable on a standard 60Hz or 100Hz monitor.
2560x1440 (1440p):
- Low: The average FPS is 167. This is a 33% reduction from the 1080p Low score, showing the impact of increased resolution.
- Medium: The average FPS is 149, with a minimum of 127 and a maximum of 171. This is a solid result for high-refresh-rate 1440p gaming.
- High: The average FPS is 101. This remains a good result, comfortably above 60 FPS.
- Ultra: The average FPS is 69. This is a playable frame rate, but it is pushing the lower bounds for a smooth experience on a high-refresh-rate display.
3840x2160 (4K):
- Low: The average FPS is 96. This is a very good result for 4K, showing that the GPU can handle the resolution when settings are lowered.
- Medium: The average FPS is 85, with a minimum of 73 and a maximum of 98. This is the most balanced 4K preset, offering a good frame rate without excessive quality loss.
- High: The average FPS is 58. This is just below the 60 FPS threshold, which may cause noticeable stuttering for some users.
- Ultra: The average FPS is 40. This is the lowest score in the dataset and is not recommended for a smooth experience.
GPU Role
The NVIDIA GeForce RTX 4070 Ti SUPER is a powerful graphics card with 16 GB of GDDR6X memory on a 256-bit bus, providing a memory bandwidth of 672.3 GB/s. It has a base clock of 2340 MHz and a boost clock of 2610 MHz. This hardware is well-suited for high-resolution gaming, but the data shows that its limits are reached at 4K Ultra settings in ArcheAge. The 44.10 TFLOPS of FP32 performance is substantial, yet the game's engine seems to place a heavy load on the GPU at maximum settings.
The GPU's performance relative to its rivals is interesting. In the database, it scores 0.4% lower than the NVIDIA Quadro M5000 and 0.4% lower than the NVIDIA GRID M60-1Q, while being 1.4% lower than the NVIDIA RTX PRO 4500 Blackwell and 1.9% lower than the NVIDIA TITAN RTX. These are all very close scores, indicating that the 4070 Ti SUPER is a consistent performer within its class. The 16 GB VRAM is a significant asset, especially for 4K gaming, as it prevents memory-related stuttering in a large-world MMORPG like ArcheAge.
The GPU's role as the primary bottleneck at 4K is clear. The frame rate drop from 1440p High (101 FPS) to 4K High (58 FPS) is a 43% reduction, which is more severe than the drop from 1080p High (150 FPS) to 1440p High (101 FPS) at 33%. This suggests that as the pixel count increases, the GPU's shading units and texture rate (689.0 GTexel/s) are pushed to their limits. The RTX 4070 Ti SUPER is a capable 4K card, but the Ultra preset in ArcheAge is too demanding for it, requiring a drop to High or Medium settings for a smooth experience.
Settings Recommendations
For a balance of visual quality and performance, the Medium preset is the most consistent choice across all resolutions. At 1080p, it offers an excellent 221 FPS average, making it ideal for competitive play. At 1440p, it delivers 149 FPS, which is perfect for high-refresh-rate monitors. Even at 4K, it maintains an 85 FPS average, which is a very playable frame rate for a game of this type. The Medium preset provides a significant performance boost over High, with only a modest reduction in visual fidelity.
The High preset is a good option for users who prioritize visual quality and have a 60Hz to 100Hz monitor. At 1440p, it averages 101 FPS, which is an excellent result. At 4K, it averages 58 FPS, which is just shy of the 60 FPS target. Users with a 60Hz 4K monitor may find this acceptable, but those who are sensitive to frame pacing might prefer the Medium preset. The Ultra preset is not recommended for any resolution due to its steep performance cost. The data shows a 31% drop in average FPS from High to Ultra at 1080p, a 32% drop at 1440p, and a 31% drop at 4K. The visual gains from Ultra are unlikely to justify these frame rate losses, especially in a fast-paced MMORPG environment. For the best overall experience, Medium at 4K or High at 1440p are the sweet spots for this hardware combination.
Hardware Specifications
AMD Ryzen 7 9700F
NVIDIA GeForce RTX 4070 Ti SUPER
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 9700F + NVIDIA GeForce RTX 4070 Ti SUPER in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 96.0 |
| 3840x2160 | Medium | 85.0 |
| 3840x2160 | High | 58.0 |
| 3840x2160 | Ultra | 40.0 |
| 2560x1440 | Low | 167.0 |
| 2560x1440 | Medium | 149.0 |
| 2560x1440 | High | 101.0 |
| 2560x1440 | Ultra | 69.0 |
| 1920x1080 | Low | 249.0 |
| 1920x1080 | Medium | 221.0 |
| 1920x1080 | High | 150.0 |
| 1920x1080 | Ultra | 103.0 |
Archeage with Ryzen 7 9700F + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RTX 4070 Ti SUPER + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 7 9700F + RTX 4070 Ti SUPER
Explore FPS benchmarks for other games using this same hardware combination.