Archeage
This combination offers playable performance with an average of 45 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 14 | 21 | 31 | 35 |
| 1440p QHD | 25 | 37 | 55 | 61 |
| 1080p Full HD | 38 | 55 | 81 | 91 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with Intel Core i7-14700KF + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis
# Archeage Performance Analysis: Intel Core i7-14700KF + NVIDIA GeForce RTX 3050 4 GB
The Intel Core i7-14700KF paired with the NVIDIA GeForce RTX 3050 4 GB produces a revealing set of benchmark results in Archeage, a 2014 MMORPG that remains surprisingly demanding at higher settings. The measured data shows a combination that ranks in the 3247th position out of 3708 tested combos, placing it in the lower tier of systems evaluated for this title. This pairing of a high-end 20-core CPU with an entry-level 4 GB GPU creates a significant performance imbalance, one that becomes immediately apparent when examining how frame rates respond to resolution changes across the four tested quality presets.
Resolution Scaling
The FPS drop from 1080p to 4K is dramatic and tells a clear story about which component is dominating performance. At Low settings, the average frame rate falls from 91 FPS at 1920x1080 to 61 FPS at 2560x1440, a reduction of 33%, and then plummets further to 35 FPS at 3840x2160, representing a 62% loss from the 1080p baseline. This pattern of steep declines as pixel count increases is the classic signature of a GPU-bound scenario, where the rendering workload outpaces what the graphics card can deliver.
The Medium preset shows a similar trajectory: 81 FPS at 1080p, dropping to 55 FPS at 1440p (a 32% decrease), and then to 31 FPS at 4K (a 62% drop from 1080p). High settings follow the same curve with 55 FPS at 1080p, 37 FPS at 1440p, and 21 FPS at 4K — the percentage losses are consistent at roughly 33% and 62% respectively, regardless of the preset. This consistency across quality levels indicates that resolution scaling is governed by the GPU's fill rate and memory bandwidth, not by the complexity of the scene or the CPU's ability to feed the renderer.
Ultra settings exhibit the most severe degradation, starting at 38 FPS in 1080p, falling to 25 FPS at 1440p, and collapsing to 14 FPS at 4K. The 4K Ultra result is barely playable, and the gap between Ultra and High at every resolution is substantial — 31% lower at 1080p, 32% lower at 1440p, and 33% lower at 4K. The data implies that the RTX 3050's 4 GB frame buffer is likely exhausted at Ultra settings, especially at higher resolutions where texture and geometry demands multiply. The 128-bit memory bus and 192.0 GB/s bandwidth appear insufficient for the data throughput required at 4K, making the resolution scaling curve steeper than what a more capable GPU would exhibit.
GPU Role
The NVIDIA GeForce RTX 3050 4 GB operates with a base clock of 1545 MHz and a boost clock of 1740 MHz, built on the GA107 chip using Samsung's 8 nm process. Its 2048 shading units, 64 texture mapping units, and 32 ROPs provide the raw computational foundation, while 16 RT cores and 64 tensor cores offer features that Archeage, as a 2014 title, likely does not leverage. The GPU's FP32 throughput of 7.127 TFLOPS is modest by modern standards, and this shows in the measured results where even at 1080p Low, the average FPS of 91 does not reach the triple-digit territory that many competitive setups achieve.
The 4 GB GDDR6 memory operates at 1500 MHz with a 12 Gbps effective data rate, producing 192.0 GB/s of bandwidth across the 128-bit interface. In a game like Archeage, which spans large open worlds with many players on screen, texture streaming and draw call processing can consume memory rapidly. The measured FPS data suggests that the 4 GB capacity becomes a limiting factor at 1440p and above, particularly at Medium and High settings where the average frame rates of 55 and 37 respectively indicate the GPU is struggling to maintain fluidity. The pixel rate of 55.68 GPixel/s and texture rate of 111.4 GTexel/s are the theoretical ceilings, but the real-world results show that these limits are reached quickly as resolution climbs.
The GPU's 90 W TDP and dual-slot design with a single 6-pin power connector place it firmly in the entry-level segment, and the 4K results confirm this positioning. At 4K Ultra, the average of 14 FPS is a slideshow, and even at 4K Low, 35 FPS is below the threshold for comfortable gameplay. The percentileVsAllGpus score of 50 indicates this GPU sits at the median of all tested graphics cards, which aligns with the observed performance — capable at 1080p, adequate at 1440p for undemanding presets, but out of its depth at 4K.
How This Combo Ranks
The combination of the Intel Core i7-14700KF and the NVIDIA GeForce RTX 3050 4 GB achieves a rank of 3247 out of 3708 tested combos in Archeage, placing it in the 12th percentile of all system configurations evaluated. This low ranking is notable because the CPU alone is a top-tier part — the i7-14700KF holds a percentileVsAllCpus of 94, meaning it outperforms 94% of all processors in the database. The stark contrast between the CPU's high percentile and the combo's low rank underscores the extent to which the GPU drags down overall gaming performance in this title.
Examining the CPU's nearest rivals provides context for the processor's capability. The AMD Ryzen 7 9700F scores 69996 on average, a mere 0.2% lower than the i7-14700KF's 70163, while the AMD Ryzen 9 7940HX is 0.4% behind. The AMD Ryzen 9 7950X trails by 0.9%, and the Intel Core Ultra 7 265K actually leads by 1% with a score of 70879. These marginal differences of less than one percentage point indicate that the CPU is not the bottleneck in this system — any of these processors would deliver nearly identical frame rates when paired with the same RTX 3050. The ranking data suggests that the 3247th position is primarily a function of GPU capability, not CPU processing power.
The combo's rank implies that a large majority of tested systems — 461 combos in total — achieve better performance in Archeage, many likely pairing mid-range GPUs with older or less powerful CPUs. This inverse relationship between CPU strength and combo rank serves as a cautionary tale about balanced system building. The data shows that the i7-14700KF's considerable multi-threading capabilities, evidenced by its 44167 score in Cinebench R23 multi-core, are largely irrelevant when the graphics card cannot keep pace with the game's rendering demands.
Measured FPS Breakdown
The measured frame rates span three resolutions and four quality settings, providing a comprehensive view of the system's capabilities. At 1920x1080, the results range from a playable 91 FPS on Low to a marginal 38 FPS on Ultra. The Medium preset delivers 81 FPS with a minimum of 69 and a maximum of 93, indicating relatively stable performance within a 24 FPS variance. High settings at 1080p produce 55 FPS average, which is acceptable for casual play but not ideal for competitive scenarios where higher frame rates provide a tangible advantage.
Moving to 2560x1440, the performance drops are noticeable but not catastrophic for lighter presets. Low settings maintain 61 FPS, which remains smooth, while Medium achieves 55 FPS with a minimum of 46 and maximum of 63 — the 17 FPS range suggests occasional dips that could be felt during intense moments. High settings fall to 37 FPS, which is borderline for an MMORPG where combat responsiveness matters, and Ultra drops to 25 FPS, making it difficult to recommend for anything beyond screenshot purposes.
At 3840x2160, the picture becomes grim. Low settings manage 35 FPS, Medium achieves 31 FPS with a minimum of 27 and maximum of 36, High drops to 21 FPS, and Ultra bottoms out at 14 FPS. None of these 4K results reach the 30 FPS threshold that many consider the minimum for playable performance, and the Ultra preset's 14 FPS is effectively unplayable. The Medium preset's data at 4K is the only one with min/max values, showing a 9 FPS spread between the 27 FPS minimum and 36 FPS maximum, which indicates the GPU is operating at its limits with little headroom for scene complexity variations.
The progression across presets at each resolution follows a consistent pattern: Low to Medium costs roughly 11-13% of frame rate, Medium to High costs 32-33%, and High to Ultra costs 31-32%. This consistent step-down suggests that the Ultra preset imposes a specific set of rendering features that the RTX 3050 cannot handle efficiently, likely related to shadow quality, draw distance, or post-processing effects that tax the GPU's limited resources.
Settings Recommendations
Based on the measured data, the optimal experience for this hardware combination depends heavily on the target resolution. At 1920x1080, the Medium preset with an average of 81 FPS and a minimum of 69 provides the best balance of visual fidelity and smooth gameplay. The 69 FPS minimum ensures that even in crowded areas or during large-scale battles, the frame rate should remain above the 60 FPS threshold for fluid motion. High settings at 55 FPS are workable but leave less margin for drops, and the jump to Ultra at 38 FPS sacrifices too much smoothness for the visual improvements.
At 2560x1440, the Low preset's 61 FPS is the only option that achieves consistently smooth performance, while Medium at 55 FPS with a 46 FPS minimum may cause noticeable stuttering during busy scenes. The data suggests that 1440p users should either accept Low settings for 60+ FPS gameplay or tolerate Medium for improved visuals knowing that dips below 50 FPS are possible. High at 37 FPS and Ultra at 25 FPS are not recommended for active gameplay, as the responsiveness required for MMORPG combat would be compromised.
For 3840x2160, the data indicates that this GPU cannot deliver a satisfactory experience at any preset. The highest average is 35 FPS at Low settings, which falls below the 60 FPS standard and barely reaches the 30 FPS minimum playability threshold. The Medium preset's 31 FPS average with a 27 FPS minimum means that frame pacing will be inconsistent, and the 21 FPS High and 14 FPS Ultra results are simply not viable. Users with 4K displays should consider lowering the resolution to 1440p or 1080p for this game, as the performance at native 4K is uniformly inadequate.
The most balanced overall recommendation from the measured rows is 1080p Medium, which delivers 81 FPS average with a 69 FPS minimum and 93 FPS maximum. This configuration provides the headroom needed for stable performance during demanding gameplay situations while maintaining a reasonable level of visual quality. For players who prioritize frame rate above all else, 1080p Low at 91 FPS is the fastest option, though the visual compromise may detract from the game's atmosphere.
CPU Role
The Intel Core i7-14700KF is a 20-core, 28-thread processor based on the Raptor Lake architecture, manufactured on Intel's 10 nm process with a die size of 257 mm². Its base clock of 3.40 GHz and boost clock of 5.60 GHz, combined with a 33 MB shared L3 cache, make it one of the most powerful consumer CPUs available. The Cinebench R23 multi-core score of 44167 and single-core score of 6235 place it among the top processors, and its Passmark single-thread score of 4480 confirms strong per-core performance that is essential for games that rely on a few heavily loaded threads.
However, the measured FPS data in Archeage reveals that the CPU's capabilities are not the limiting factor in this system. The consistent frame rate drops across resolution changes — from 91 FPS at 1080p Low to 35 FPS at 4K Low — indicate that the GPU is saturated well before the CPU reaches its capacity. An MMORPG like Archeage, released in 2014, likely cannot utilize all 20 cores effectively, and the game's engine probably depends on a few primary threads. The i7-14700KF's high single-thread performance should excel in this scenario, but the RTX 3050's modest rendering throughput prevents the CPU's advantages from manifesting in higher frame rates.
The CPU's memory support for both DDR4 and DDR5 across a dual-channel bus provides flexibility, but the game's performance is unlikely to be memory-bandwidth constrained given the GPU bottleneck. The 125 W TDP and unlocked multiplier indicate a processor designed for enthusiast overclocking, yet such tuning would have minimal impact on Archeage's frame rates when the graphics card is the limiting component. The benchmark data strongly suggests that upgrading the GPU would yield far greater performance gains than any CPU adjustment, as the processor's 94th percentile ranking vastly exceeds the combo's 12th percentile game ranking.
FAQ
Q: Can this system run Archeage at 4K resolution?
A: The measured data shows that 4K performance is poor across all settings. The highest average FPS at 3840x2160 is 35 on Low, dropping to 31 on Medium, 21 on High, and 14 on Ultra. None of these results meet the 60 FPS standard, and only Low and Medium marginally exceed the 30 FPS minimum playability threshold.
Q: What is the best settings preset for 1080p gameplay?
A: At 1920x1080, the Medium preset delivers 81 FPS average with a minimum of 69 FPS and maximum of 93 FPS. This provides the best combination of visual quality and smooth performance, as High drops to 55 FPS and Ultra falls to 38 FPS.
Q: How does the RTX 3050 4 GB's memory capacity affect performance?
A: The 4 GB GDDR6 memory with a 128-bit bus and 192.0 GB/s bandwidth appears to be a limiting factor at higher resolutions. The steep FPS drops from 1440p to 4K suggest that the frame buffer is exhausted, particularly at High and Ultra settings where texture and geometry demands increase substantially.
Q: Why does this combo rank so low despite having a powerful CPU?
A: The combo ranks 3247th out of 3708 tested configurations, while the i7-14700KF alone outperforms 94% of all CPUs. This discrepancy is due to the RTX 3050's median GPU performance (50th percentile), which constrains frame rates and prevents the CPU's high-end capabilities from being utilized effectively in this game.
Q: Is the CPU or GPU the bottleneck in this system for Archeage?
A: The data clearly indicates the GPU is the bottleneck. Frame rates scale consistently with resolution changes (e.g., 91 FPS at 1080p Low versus 35 FPS at 4K Low), which is characteristic of GPU-bound performance. The CPU's nearest rivals all score within 1% of its average benchmark score, confirming that processor differences would not meaningfully change game FPS.
Q: What are the minimum FPS values for Medium settings?
A: The measured data provides minimum FPS only for the Medium preset at each resolution: 69 FPS at 1920x1080, 46 FPS at 2560x1440, and 27 FPS at 3840x2160. These minimum values indicate the worst-case frame rates during gameplay, which are critical for assessing stutter and responsiveness.
Hardware Specifications
Intel Core i7-14700KF
NVIDIA GeForce RTX 3050 4 GB
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-14700KF + NVIDIA GeForce RTX 3050 4 GB in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 35.0 |
| 3840x2160 | Medium | 31.0 |
| 3840x2160 | High | 21.0 |
| 3840x2160 | Ultra | 14.0 |
| 2560x1440 | Low | 61.0 |
| 2560x1440 | Medium | 55.0 |
| 2560x1440 | High | 37.0 |
| 2560x1440 | Ultra | 25.0 |
| 1920x1080 | Low | 91.0 |
| 1920x1080 | Medium | 81.0 |
| 1920x1080 | High | 55.0 |
| 1920x1080 | Ultra | 38.0 |
Archeage with RTX 3050 4 GB + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with ii7-14700KF + RTX 3050 4 GB
Explore FPS benchmarks for other games using this same hardware combination.