Archeage

Archeage

AVERAGE FPS
98
good

This combination provides smooth gameplay with an average of 98 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 31 47 69 75
1440p QHD 57 80 116 133
1080p Full HD 83 118 173 196

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 75
3840x2160 Medium 69
3840x2160 High 47
3840x2160 Ultra 31
2560x1440 Low 133
2560x1440 Medium 116
2560x1440 High 80
2560x1440 Ultra 57
1920x1080 Low 196
1920x1080 Medium 173
1920x1080 High 118
1920x1080 Ultra 83

Archeage with Intel Core i5-14400F + AMD Radeon RX 6800 XT, In-Depth Analysis

The Intel Core i5-14400F and AMD Radeon RX 6800 XT combination delivers a playable Archeage experience, but the data reveals a clear performance ceiling dictated by the graphics card at higher resolutions. The system is exceptionally strong at 1080p, offering frame rates well above 100 FPS across most settings, but drops to sub-60 FPS territory at 4K Ultra, indicating that the RX 6800 XT, rather than the CPU, is the primary bottleneck in the most demanding scenarios.

Resolution Scaling

The performance drop from 1080p to 4K is steep and consistent, confirming that resolution scaling is heavily GPU-bound. At Low settings, the average frame rate falls from 196.2 FPS at 1920x1080 to 133.4 FPS at 2560x1440, a reduction of 32%, and then further to 74.5 FPS at 3840x2160, a 62% drop from the 1080p baseline. This pattern strongly indicates that the Radeon RX 6800 XT is the limiting component, as the workload scales directly with pixel count.

The trend is similar across other settings. At High settings, the system produces 117.7 FPS at 1080p, 79.7 FPS at 1440p, and 46.9 FPS at 4K. The 4K High result represents a 60% reduction from 1080p High. At Medium settings, the scaling is slightly less severe percentage-wise, going from 172.8 FPS at 1080p to 115.8 FPS at 1440p to 68.6 FPS at 4K. The Ultra preset shows the largest relative drop, from 82.9 FPS at 1080p to 56.9 FPS at 1440p, and finally to a demanding 31.2 FPS at 4K.

The frame rate deltas between resolutions are not uniform, which suggests that the game's engine has varying efficiency at different load levels. The gap between 1080p and 1440p is smaller than the gap between 1440p and 4K, particularly at lower settings. For instance, at Low settings, the drop from 1080p to 1440p is 62.8 FPS, while the drop from 1440p to 4K is 58.9 FPS. This indicates that while the GPU is the primary constraint, the transition to 4K introduces a disproportionately heavy load that pushes the RX 6800 XT to its limits.

Settings Recommendations

The measured rows show that the Medium preset is the most balanced choice for this hardware when targeting higher resolutions. At 2560x1440, Medium delivers 115.8 FPS, which is a 45% improvement over High's 79.7 FPS and still a very smooth experience. Even at 3840x2160, Medium maintains a playable 68.6 FPS, making it the only preset besides Low to cross the 60 FPS threshold at 4K.

For users prioritizing visual fidelity at 1440p, the High preset is viable, providing 79.7 FPS. The step from High to Ultra at 1440p is punishing, costing 22.8 FPS and bringing the average down to 56.9 FPS. This suggests that the Ultra preset's additional effects are not well optimized for this GPU at this resolution.

At 1080p, the choice is less critical. The system can handle Ultra at 82.9 FPS, but the jump to High yields 117.7 FPS, a 42% increase. The Medium preset offers 172.8 FPS, which is ideal for high-refresh-rate displays, while Low hits 196.2 FPS, nearly maxing out most 1080p monitors. For the best overall experience at 1080p, the High preset provides a strong balance of quality and speed, but competitive players may prefer Medium for its significant frame rate advantage.

GPU Role

The AMD Radeon RX 6800 XT, with its 16 GB of GDDR6 memory on a 256-bit bus, provides a substantial 512.0 GB/s of bandwidth. This memory configuration is likely a key factor in maintaining playable frame rates at 4K, where the game's textures and assets require significant data throughput. The GPU's 4608 shading units and 128 ROPs are tasked with the heavy lifting of pixel processing, and the benchmark results show a clear correlation between the GPU's load and frame rate drops at higher resolutions.

The GPU's clock speeds are also relevant. The base clock is 1825 MHz, with a game clock of 2015 MHz and a boost clock of 2250 MHz. These clocks, combined with the RDNA 2.0 architecture, allow the card to achieve a pixel rate of 288.0 GPixel/s and a texture rate of 648.0 GTexel/s. These specifications translate into raw throughput that is sufficient for 1080p and 1440p gaming, but the 4K Ultra result of 31.2 FPS indicates that the card's compute capacity is overwhelmed when all visual effects are enabled at maximum pixel count.

The GPU's passmark_g3d score of 24980 places it in the 87th percentile of all GPUs, and its performance is closely matched by rivals like the Intel Arc A550M, which has an average score of 49737, just 0.5% behind. This context shows that the RX 6800 XT is a high-tier component, yet the game's demands at 4K Ultra still exceed its capabilities. The near parity with the NVIDIA GeForce RTX 4070 Ti SUPER, which is 2.6% slower in average score, reinforces that this is a top-tier card struggling with an extreme workload.

FAQ

Q: Can this system run Archeage at 4K smoothly?

A: At 4K with Medium settings, the system achieves an average of 68.6 FPS, which is playable. At High settings, it drops to 46.9 FPS, and at Ultra it falls to 31.2 FPS, so smooth 4K gaming is only possible on lower presets.

Q: What is the best resolution for this combo?

A: The data shows that 2560x1440 offers the best balance. At Medium settings, it delivers 115.8 FPS, and at High it provides 79.7 FPS, both of which are smooth experiences without the extreme performance penalty seen at 4K.

Q: How much faster is Low settings compared to Ultra at 1080p?

A: At 1920x1080, the Low preset produces 196.2 FPS, which is 113.3 FPS higher than the Ultra preset's 82.9 FPS. This represents a 137% increase in average frame rate.

Q: Is the CPU or GPU the bottleneck in this game?

A: Based on the resolution scaling data, the GPU is the clear bottleneck. The frame rate drops significantly as resolution increases, from 196.2 FPS at 1080p Low to 74.5 FPS at 4K Low, indicating that the Radeon RX 6800 XT is the limiting factor.

Q: Does the Ultra preset offer a worthwhile performance gain over High?

A: No. At 1440p, the drop from High to Ultra is 22.8 FPS, a 29% reduction. At 4K, the drop is 15.7 FPS, a 33% reduction. The performance cost is substantial relative to the visual upgrade.

Q: How does this GPU compare to its nearest rival in synthetic benchmarks?

A: In the PassMark G3D benchmark, the RX 6800 XT scores 24980, which is 0.5% higher than the Intel Arc A550M's 49737 score. It also leads the NVIDIA GeForce RTX 4070 Ti SUPER by 2.6%.

How This Combo Ranks

This specific combination of the Intel Core i5-14400F and AMD Radeon RX 6800 XT ranks 580th out of 1727 tested combos for Archeage. This places it in the 66th percentile of all tested systems, indicating that it is a solidly above-average configuration for this title. The ranking suggests that while the hardware is powerful, the game's engine does not fully utilize the system's potential, as evidenced by the significant frame rate drops at 4K.

The rank is likely held back by the GPU's performance at extreme settings. The CPU is in the 88th percentile of all processors with an average benchmark score of 32508, and the GPU is in the 87th percentile with an average score of 49982. Both components are high-tier, yet the combo's rank of 580 out of 1727 suggests that other combinations of similarly powerful parts achieve better results in Archeage specifically. This could be due to the game's engine favoring certain architectures or clock speeds.

The rank indicates that users can expect a very capable system for most gaming scenarios, but for Archeage, the performance ceiling is reached at 1440p. The data suggests that to improve the rank, a more powerful GPU would be necessary, as the current card is the primary bottleneck in the most demanding resolutions.

CPU Role

The Intel Core i5-14400F plays a supporting role in this game's performance, as the frame rate data indicates a GPU bottleneck. The CPU has 10 cores and 16 threads, with a base clock of 2.50 GHz and a boost clock of 4.70 GHz. This configuration provides strong single-thread and multi-thread performance, with a Cinebench R23 multi-core score of 21914 and a single-core score of 3093.

The CPU's performance is sufficient to feed the GPU at 1080p and 1440p, as evidenced by the high frame rates at those resolutions. At 1080p Low, the system achieves 196.2 FPS, which is a strong indicator that the CPU is not limiting the frame rate. The CPU's 20 MB of shared L3 cache and support for DDR4 and DDR5 memory help reduce latency and ensure smooth data flow to the GPU.

Compared to its nearest rivals, the Core i5-14400F performs nearly identically. It is within 0.2% of the AMD Ryzen 5 PRO 7645 and the AMD Ryzen 7 250, and it matches the Intel Core i7-13705H's average score. This parity suggests that any of these CPUs would yield similar results in Archeage when paired with the same GPU. The CPU's role becomes more critical at lower resolutions and settings, but in this data, the GPU's limitations are the dominant factor. The 65W TDP and Intel Socket 1700 compatibility make it a standard, efficient choice, but the benchmark results clearly show that the RX 6800 XT is the component that determines the overall frame rate ceiling.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates. Low settings produce an average of 196.2 FPS, Medium produces 172.8 FPS, High produces 117.7 FPS, and Ultra produces 82.9 FPS. The scaling from Low to Ultra shows a 113.3 FPS drop, which is a 58% reduction in performance.

At 2560x1440, the frame rates are still high but show a clear step down. Low settings average 133.4 FPS, Medium averages 115.8 FPS, High averages 79.7 FPS, and Ultra averages 56.9 FPS. The drop from Low to Ultra is 76.5 FPS, a 57% reduction, mirroring the percentage decline seen at 1080p.

At 3840x2160, the system begins to struggle. Low settings average 74.5 FPS, Medium averages 68.6 FPS, High averages 46.9 FPS, and Ultra averages 31.2 FPS. The gap between Medium and High is 21.7 FPS, and the gap between High and Ultra is 15.7 FPS. The Ultra setting at 4K is the only configuration that falls below 32 FPS, making it the least playable option. Across all resolutions, the Low preset consistently offers the highest frame rates, while the Ultra preset offers the lowest, with the relative differences between presets remaining consistent.

Hardware Specifications

Intel Core i5-14400F

Cores / Threads 10 / 16
Base Clock 2500 MHz
Boost Clock 4700 MHz
TDP 65W
Socket Intel Socket 1700
View Full CPU Details →

AMD Radeon RX 6800 XT

VRAM 16 GB GDDR6
Base Clock —
Boost Clock 2250 MHz MHz
TDP 300 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-14400F + AMD Radeon RX 6800 XT in Archeage

Resolution Settings Avg FPS
3840x2160 Low 74.5
3840x2160 Medium 68.6
3840x2160 High 46.9
3840x2160 Ultra 31.2
2560x1440 Low 133.4
2560x1440 Medium 115.8
2560x1440 High 79.7
2560x1440 Ultra 56.9
1920x1080 Low 196.2
1920x1080 Medium 172.8
1920x1080 High 117.7
1920x1080 Ultra 82.9

Archeage with ii5-14400F + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with RX 6800 XT + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with ii5-14400F + RX 6800 XT

Explore FPS benchmarks for other games using this same hardware combination.