Archeage

Archeage

AVERAGE FPS
91
good

This combination provides smooth gameplay with an average of 91 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 29 42 62 70
1440p QHD 51 74 109 122
1080p Full HD 75 110 162 182

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 70
3840x2160 Medium 62
3840x2160 High 42
3840x2160 Ultra 29
2560x1440 Low 122
2560x1440 Medium 109
2560x1440 High 74
2560x1440 Ultra 51
1920x1080 Low 182
1920x1080 Medium 162
1920x1080 High 110
1920x1080 Ultra 75

Archeage with AMD Ryzen 9 9900X3D + NVIDIA GeForce RTX 3070 Ti, In-Depth Analysis

The AMD Ryzen 9 9900X3D and NVIDIA GeForce RTX 3070 Ti pairing in Archeage presents a clear picture of a system where the graphics card becomes the limiting factor as resolution scales up. The data shows a dramatic performance curve: at 1080p the combo delivers high frame rates that are typical of a strong CPU-driven result, but at 4K the frame rates collapse to levels that are barely playable on High settings. This is a classic case of a processor that has far more headroom than the GPU can exploit, particularly in a title like Archeage where the 12-core, 24-thread Ryzen 9 9900X3D with its 128 MB of L3 cache is overkill for the game's threading demands. The RTX 3070 Ti, with its 8 GB of GDDR6X memory on a 256-bit bus, is the component that determines the ceiling here, and the measured FPS numbers across all resolutions make that bottleneck unmistakable.

Resolution Scaling

The FPS drop from 1080p to 4K is severe and indicates a GPU-bound scenario at higher resolutions. At 1080p High settings, the combo averages 110 FPS, which is a solid number for an MMORPG. Moving to 1440p High, the average drops to 74 FPS, a 33% reduction. At 4K High, the average is just 42 FPS, which is another 43% drop from 1440p. This pattern is the signature of a graphics card that is being overwhelmed by pixel count; the RTX 3070 Ti's 608.3 GB/s of memory bandwidth and 21.75 TFLOPS of FP32 compute are sufficient for 1080p, but they fall short as the pixel workload quadruples at 4K.

The scaling is even more telling when looking at the Low preset. At 1080p Low, the system hits 182 FPS, which is excellent and suggests the CPU is not holding things back. At 1440p Low, it still manages 122 FPS, but at 4K Low it drops to 70 FPS. The fact that 4K Low (70 FPS) is slower than 1080p High (110 FPS) shows that even reducing graphical fidelity cannot compensate for the raw pixel count at 4K. The RTX 3070 Ti simply runs out of steam, and the Ryzen 9 9900X3D, which has a single-thread score of 1269 in 3DMark and a Cinebench R23 single-core score of 6739, is not the limiting factor in any of these scenarios.

The data suggests that this combo is best suited for 1080p or 1440p gaming in Archeage. At 1080p, all presets except Ultra are above 100 FPS, with Medium hitting 162 FPS. At 1440p, the Low and Medium presets are still respectable at 122 FPS and 109 FPS respectively, but High drops to 74 FPS. The 4K results are consistently poor, with even the Medium preset only achieving 62 FPS with a minimum of 53 FPS, which is below the threshold for smooth gameplay in a competitive MMO setting. The gap between 1080p and 4K is roughly 77% at High settings, which is a stark reminder of how much pixel throughput matters.

FAQ

Q: Is the Ryzen 9 9900X3D the bottleneck in Archeage at 4K?

A: No. The data shows that at 4K High the average FPS is 42, while at 1080p High it is 110. If the CPU were the bottleneck, the 1080p and 4K scores would be closer together. The CPU's Cinebench R23 multicore score of 47737 and 3DMark max threads score of 13795 indicate it has ample headroom, so the RTX 3070 Ti's pixel processing limits are the cause of the low 4K frame rates.

Q: What is the best resolution for this combo in Archeage?

A: Based on the measured FPS, 1440p Medium provides a balanced experience with an average of 109 FPS and a minimum of 93 FPS. This is above the 60 FPS threshold and keeps the system from being overly GPU-bound. 1080p is better for high refresh rates, with Medium hitting 162 FPS, but 1440p offers a sharper image without sacrificing playability.

Q: How does the RTX 3070 Ti compare to its nearest rivals in terms of average benchmark score?

A: The RTX 3070 Ti has an average benchmark score of 29945, which places it 0.5% behind the AMD Radeon RX 6800 (30095) and 0.1% ahead of the NVIDIA GeForce RTX 5070 Mobile (29928). It is also 0.5% ahead of the RTX 2080 Ti (29783). These differences are negligible in real-world gaming, so the performance profile in Archeage is likely similar across these cards.

Q: Does the Ryzen 9 9900X3D's 128 MB of L3 cache help in Archeage?

A: The CPU's 128 MB of L3 cache is a standout feature, but the benchmark data does not isolate its impact on this specific game. The CPU's percentile rank of 91 against all CPUs and its 3DMark single-thread score of 1269 suggest strong per-core performance, which is what matters most for an MMORPG. However, the FPS drops at higher resolutions are clearly tied to the GPU, not the cache.

Q: Is the Ultra preset worth using in Archeage?

A: No. At 1080p Ultra, the average FPS is 75, which is playable but not ideal. At 1440p Ultra, it drops to 51 FPS, and at 4K Ultra it is only 29 FPS. The performance cost of Ultra over High is steep; at 1080p, High is 110 FPS versus Ultra's 75 FPS, a 32% penalty. Given these numbers, High is the more sensible choice for maintaining higher frame rates.

Q: What is the role of the CPU's clock speed in these results?

A: The Ryzen 9 9900X3D has a base clock of 4.40 GHz and a boost clock of 5.50 GHz. Its 3DMark 2-thread score of 2512 and Cinebench R15 single-core score of 679 show it is strong in lightly-threaded tasks. In Archeage, where the CPU is not the bottleneck at any resolution above 1080p, these clocks are sufficient to feed the GPU without causing frame drops.

How This Combo Ranks

The combo ranks 1330 out of 3708 tested combinations in Archeage, placing it in the 36th percentile of all tested systems. This is a mid-pack result that reflects the RTX 3070 Ti's age and position in the GPU hierarchy, rather than a deficiency in the CPU. The Ryzen 9 9900X3D is a top-tier processor, with a percentile rank of 91 among all CPUs and an average benchmark score of 54762, but the GPU's percentile rank of 75 among all GPUs drags the overall combo ranking down.

When compared to other combos, the ranking indicates that many systems with newer or higher-end GPUs outperform this pairing in Archeage. The RTX 3070 Ti's nearest rivals, such as the RTX 2080 Ti (deltaPct of 0.5%) and the RX 6800 (deltaPct of -0.5%), have similar average scores, so combos using those cards would likely rank in the same vicinity. The CPU's nearest rivals, like the Intel Core Ultra 5 245KF (deltaPct of -0.6%) and the Intel Core i7-14700F (deltaPct of 2.1%), show that the 9900X3D is competitive with other modern processors, but the overall system performance is capped by the GPU.

The rank of 1330 out of 3708 means there are 2378 combos that rank below this one, but also 1329 that rank above. This is not a top-tier gaming rig for Archeage, but it is far from the bottom. The data suggests that the CPU is a future-proofing investment, while the GPU is the current weak link. Upgrading the GPU would likely move this combo significantly higher in the rankings, as the CPU has the headroom to support a more powerful graphics card.

Measured FPS Breakdown

At 1920x1080, the system delivers its best performance. With Low settings, the average FPS is 182, which is excellent for fast-paced gameplay. Medium settings reduce that to 162 FPS, with a minimum of 138 FPS and a maximum of 186 FPS, showing good frame consistency. High settings drop to 110 FPS, which is still smooth, but Ultra settings fall to 75 FPS, which is a notable penalty for the extra visual fidelity. The 1080p results show that the CPU and GPU can handle this resolution without breaking a sweat, and the frame times are likely tight given the narrow range between min and max on Medium.

At 2560x1440, the performance becomes more moderated. Low settings still deliver a strong 122 FPS average, but Medium drops to 109 FPS with a minimum of 93 FPS and a maximum of 125 FPS. High settings are playable at 74 FPS, but Ultra dips below the 60 FPS threshold to 51 FPS. The 1440p data indicates that the RTX 3070 Ti is starting to feel the load, as the step from Low to Medium costs 13 FPS, and the step from Medium to High costs 35 FPS. The gap between 1080p and 1440p at High settings is 36 FPS, which is a 33% reduction.

At 3840x2160, the results are the weakest. Low settings only manage 70 FPS, which is barely playable for an MMO. Medium settings drop to 62 FPS with a minimum of 53 FPS, which is below the 60 FPS target for smoothness. High settings fall to 42 FPS, and Ultra is unplayable at 29 FPS. The 4K numbers confirm that this GPU is not suited for 4K gaming in Archeage, as even the lowest settings cannot maintain a consistent 60 FPS. The performance cliff between 1440p and 4K is steep, with the High preset losing 32 FPS (43%) when moving from 1440p to 4K.

Settings Recommendations

The best experience for this combo in Archeage is at 1440p with Medium settings. This preset achieves an average of 109 FPS with a minimum of 93 FPS, which provides a smooth and responsive feel for an MMORPG where reaction time matters in PvP scenarios. The 1440p Medium setting offers a good balance between visual quality and performance, as the frame rate is well above the 60 FPS mark and the minimum does not dip into stutter territory. The 1080p Medium preset is also viable, hitting 162 FPS, but it does not offer the same visual clarity as 1440p.

For players who prioritize maximum frame rates, 1080p Low is the best choice, delivering 182 FPS. This is ideal for competitive play where every frame counts, and the low settings reduce visual clutter. However, for a more immersive experience with better shadows and textures, 1440p High at 74 FPS is acceptable, but the frame rate is close to the edge of what is considered smooth. The Ultra preset is not recommended at any resolution, as it costs too much performance for the visual gains; at 1080p it only gets 75 FPS, and at 1440p it drops to 51 FPS.

If you must play at 4K, the Low preset is the only one that approaches playability at 70 FPS, but it sacrifices significant visual fidelity. The Medium preset at 4K, with an average of 62 FPS and a minimum of 53 FPS, is risky for competitive play because the minimum frame rate can cause noticeable hitches. The data clearly shows that the RTX 3070 Ti is not a 4K card for this game, so sticking to 1440p or below is the practical choice. For most users, 1440p Medium is the sweet spot, offering a high refresh rate experience without the need to drop to the lowest settings.

CPU Role

The AMD Ryzen 9 9900X3D is a 12-core, 24-thread processor based on the Zen 5 architecture (Granite Ridge), built on a 4 nm process by TSMC. It has a base clock of 4.40 GHz and a boost clock of 5.50 GHz, with a TDP of 120 W. Its cache configuration is substantial: 80 KB of L1 per core, 1 MB of L2 per core, and a massive 128 MB of L3 cache, which is a hallmark of the X3D series. The CPU's benchmark scores are impressive, with a Cinebench R23 multicore score of 47737 and a single-core score of 6739, indicating strong performance in both multi-threaded and single-threaded workloads.

In Archeage, the CPU's role is primarily to feed the GPU with draw calls and handle game logic, but the data shows that it is not a bottleneck. At 1080p Low, the system hits 182 FPS, which is near the upper limit of what the GPU can output, and the frame rate is likely limited by the RTX 3070 Ti's fill rate rather than the CPU's instruction throughput. The CPU's 3DMark single-thread score of 1269 and 2-thread score of 2512 suggest that it can handle the lightly-threaded nature of an MMORPG engine, which often relies on a few fast cores rather than many slower ones.

The 128 MB of L3 cache is a key feature, as it can reduce memory latency for frequently accessed data. However, the measured FPS data does not show a distinct advantage over other CPUs in this specific game, as the GPU is the limiting factor. The CPU's percentile rank of 91 against all CPUs means it is in the top 9% of processors, and its average benchmark score of 54762 is competitive with its nearest rivals, such as the Intel Core Ultra 5 245KF (55093) and the Intel Core i7-14700F (53620). This indicates that the CPU has plenty of headroom for future GPU upgrades, and it will not hold back a more powerful graphics card in Archeage or other titles. The 24 threads and 12 cores are overkill for this game, but they ensure that the CPU is never the cause of frame drops, even in crowded areas with many players.

Hardware Specifications

AMD Ryzen 9 9900X3D

Cores / Threads 12 / 24
Base Clock 4400 MHz
Boost Clock 5500 MHz
TDP 120W
Socket AMD Socket AM5
View Full CPU Details →

NVIDIA GeForce RTX 3070 Ti

VRAM 8 GB GDDR6X
Base Clock —
Boost Clock 1770 MHz MHz
TDP 290 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 9 9900X3D + NVIDIA GeForce RTX 3070 Ti in Archeage

Resolution Settings Avg FPS
3840x2160 Low 70.0
3840x2160 Medium 62.0
3840x2160 High 42.0
3840x2160 Ultra 29.0
2560x1440 Low 122.0
2560x1440 Medium 109.0
2560x1440 High 74.0
2560x1440 Ultra 51.0
1920x1080 Low 182.0
1920x1080 Medium 162.0
1920x1080 High 110.0
1920x1080 Ultra 75.0

Archeage with Ryzen 9 9900X3D + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with RTX 3070 Ti + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with Ryzen 9 9900X3D + RTX 3070 Ti

Explore FPS benchmarks for other games using this same hardware combination.