Archeage

Archeage, an MMORPG from 2014, still presents a meaningful challenge to modern hardware when pushed to its limits. The data for the AMD Ryzen 7 7800X3D and NVIDIA GeForce RTX 4070 combination shows a system that is exceptionally capable at mainstream resolutions but begins to buckle under the weight of 4K Ultra settings. The measured frames per second reveal a clear hierarchy where the settings menu has a more dramatic impact on performance than the resolution scaling alone, suggesting a complex balance between CPU and GPU load.

Resolution Scaling

The transition from 1080p to 4K demonstrates that this pairing is heavily influenced by the graphics card at higher pixel counts. At the "Low" preset, the system delivers 212.1 FPS at 1920x1080, which drops to 139.6 FPS at 2560x1440, and finally to 80.7 FPS at 3840x2160. This represents a 62% reduction in frame rate from 1080p to 4K, indicating that while the RTX 4070 is the primary bottleneck at 4K, the Ryzen 7 7800X3D is still feeding it enough data to maintain a highly playable experience. The 1080p Low figure of 212.1 FPS shows a massive headroom where the CPU is likely limiting the output, as the GPU has spare capacity.

Moving to the "Medium" preset, the scaling pattern shifts slightly. At 1080p, the system achieves 188.6 FPS, which falls to 129.2 FPS at 1440p, and then to 71.4 FPS at 4K. The drop from 1440p to 4K is a 45% reduction, which is less severe than the Low preset’s 42% drop from 1440p to 4K, but the absolute numbers are closer together. This suggests that as the graphical load increases, the GPU becomes the definitive limiting factor, and the CPU's 3D V-Cache advantage is less relevant.

The "High" preset tells a similar story with a steeper curve. Performance starts at 129.2 FPS at 1080p, declines to 87.3 FPS at 1440p, and then falls to 48.3 FPS at 4K. The 4K High result is a 63% reduction from the 1080p High result, showing that the RTX 4070 is struggling with the increased shading and texture work. The "Ultra" preset is where the system truly shows its limits, as it is the only setting where 1080p performance (88.7 FPS) is below the 1440p High result (87.3 FPS). At 4K Ultra, the average frame rate collapses to 31.4 FPS, which is a 65% drop from 1080p Ultra, clearly indicating that the GPU is overwhelmed by the combination of high resolution and maximum graphical fidelity.

The data shows that resolution scaling is not linear, and the gap between 1080p and 4K widens as the preset quality increases. At Low, the difference between the two extremes is 131.4 FPS, while at Ultra it is 57.3 FPS. This implies that at lower presets, the CPU can still push high frame rates, but the GPU’s rendering limits are exposed sooner as the resolution climbs. The 4K Low result of 80.7 FPS is still smooth, but the 4K Ultra result of 31.4 FPS is close to unplayable for a fast-paced MMORPG.

Settings Recommendations

Based on the measured rows, the optimal balance of visual fidelity and performance is found at the "High" preset for 1440p and 1080p. At 1920x1080, the High preset delivers 129.2 FPS, which is only slightly lower than the Medium preset’s 188.6 FPS but offers significantly better visual quality. The jump from High to Ultra at 1080p is a massive 31% performance loss (from 129.2 to 88.7 FPS), yet the visual improvement in an MMORPG like Archeage is often subtle. Therefore, High is the sweet spot for competitive play at 1080p, as it keeps the frame rate well above the 100 FPS threshold for smooth motion.

For 2560x1440, the High preset is again the recommended choice, providing 87.3 FPS. This is a substantial improvement over the Ultra preset’s 57.8 FPS, and the difference is more pronounced than at 1080p. The Medium preset at 1440p offers 129.2 FPS, but the visual downgrade from High is noticeable. The data suggests that users with 1440p monitors should stick to High, as it provides a playable frame rate without sacrificing the graphical details that make the game world immersive.

At 4K, the situation is more complicated. The High preset yields 48.3 FPS, which is marginally above the 45 FPS threshold for acceptable playability, but it is not ideal for fast-paced combat. The Medium preset at 4K achieves 71.4 FPS, which is a much better experience, but it requires accepting a significant reduction in texture quality and effects. The Low preset at 4K provides 80.7 FPS, but the visual quality is poor. For 4K users, the Medium preset is the recommended choice, as it is the only setting that balances a playable frame rate (71.4 FPS) with reasonable visual fidelity. The Ultra preset at 4K is not recommended, as the 31.4 FPS average is too low for consistent gameplay.

The overall recommendation is to use the High preset for 1080p and 1440p, and to drop to Medium for 4K. This approach maximizes the visual experience while maintaining a frame rate that is suitable for the game’s mechanics.

GPU Role

The NVIDIA GeForce RTX 4070 plays a critical role in this game’s performance, particularly at higher resolutions and settings. The GPU is equipped with 12 GB of GDDR6X memory on a 192-bit bus, providing a bandwidth of 504.2 GB/s. In Archeage, the 12 GB capacity is sufficient for the game’s textures at 1080p and 1440p, but at 4K Ultra, the memory bandwidth becomes a constraint, as evidenced by the 31.4 FPS result. The GPU’s boost clock of 2475 MHz and base clock of 1920 MHz are relatively high, and the data suggests that the card is running at its limits during 4K Ultra scenarios.

The RTX 4070’s performance in this game is not uniform across resolutions. The benchmark results show a PassMark G3D score of 26927 and a PassMark DirectX 11 score of 244, which confirms its DirectX 11 capabilities, the API that Archeage likely uses. The card’s 5888 shading units and 64 ROPs are responsible for the pixel throughput, and the measured 158.4 GPixel/s pixel rate is a key factor in the 4K performance. The fact that the 4K Low preset (80.7 FPS) is nearly identical to the 1440p High preset (87.3 FPS) shows that the GPU is not the bottleneck at low settings, but rather the CPU’s ability to feed it draw calls.

The GPU’s memory clock of 1313 MHz (21 Gbps effective) is also a factor. In the 4K Ultra test, the game is likely exceeding the 12 GB memory capacity, forcing the system to use slower memory access, which contributes to the low frame rate. The RX Vega 56 is a nearest rival with a deltaPct of -0.6, meaning the RTX 4070 scores 0.6% lower in average benchmark scores, but in this game, the RTX 4070’s architectural advantages in ray tracing and DLSS are not leveraged, so the raw rasterization performance is what matters. The data indicates that the RTX 4070 is a strong GPU for this game at 1080p and 1440p, but it is not future-proof for 4K Ultra in Archeage.

FAQ

Q: What is the average frame rate for this combo at 1440p High settings?

A: The system achieves an average of 87.3 FPS at 2560x1440 with High settings, which is a smooth experience for most players.

Q: Is the RTX 4070 enough for 4K gaming in Archeage?

A: The data shows 48.3 FPS at 4K High and 31.4 FPS at 4K Ultra. While the High preset is playable, the Ultra preset is not recommended due to the low frame rate.

Q: How does the Ryzen 7 7800X3D’s cache affect performance in this game?

A: The CPU has 96 MB of shared L3 cache, which helps in CPU-bound scenarios. At 1080p Low, the system hits 212.1 FPS, indicating the CPU is strong, but the GPU becomes the limit at higher resolutions.

Q: What is the best preset for competitive play at 1080p?

A: The High preset at 1080p delivers 129.2 FPS, which is a good balance. The Ultra preset drops to 88.7 FPS, so High is recommended to maintain high frame rates.

Q: Does the game use more than 8 cores effectively?

A: The CPU has 8 cores and 16 threads. The fact that the 1080p Low result is 212.1 FPS suggests the multi-threaded performance is sufficient, but the game’s engine likely benefits from the high single-thread performance (3dmark single-thread score of 959).

Q: How does this combo rank compared to all other tested combos?

A: It ranks 417 out of 1727 total tested combinations, placing it in the top 24% of all tested pairs.

How This Combo Ranks

The AMD Ryzen 7 7800X3D and NVIDIA GeForce RTX 4070 combination holds a rank of 417 out of 1727 tested combos in Archeage. This places it in the 76th percentile of all tested systems, which is a strong showing for a mid-range to high-end pairing. The rank is determined by the average performance across all resolutions and settings, and the data shows that this combo excels at 1080p and 1440p but loses ground at 4K Ultra. The CPU’s percentileVsAllCpus of 87 indicates it is in the top 13% of all CPUs, while the GPU’s percentileVsAllGpus of 81 shows it is in the top 19% of all GPUs. This means the CPU is relatively stronger than the GPU in this pairing.

The rank of 417 suggests that there are many combos with more powerful GPUs (like the RTX 4080 or RX 7900 series) that can handle 4K Ultra better, but for 1080p and 1440p gaming, this combo is very competitive. The nearest CPU rivals, such as the Intel Core i7-12700F (deltaPct 0.1) and AMD Ryzen 9 5980HX (deltaPct 0.3), show that the Ryzen 7 7800X3D is only slightly ahead in synthetic benchmarks, but the 3D V-Cache provides a tangible benefit in this MMORPG, which is often latency-sensitive. The GPU rivals, including the AMD Radeon RX Vega 56 (deltaPct -0.6) and NVIDIA GeForce RTX 4080 Mobile (deltaPct -2.2), are not directly comparable in desktop performance, but the RTX 4070’s position is solid. Overall, this combo is well-suited for Archeage players who prioritize high refresh rates at 1080p or 1440p, and the rank reflects that it is a top-tier choice for that use case, even if it cannot dominate at 4K Ultra.