Archeage

The AMD Ryzen 7 7800X3D paired with the NVIDIA GeForce RTX 4070 SUPER delivers a solid, high-refresh experience in Archeage, but the data clearly shows that the game’s engine and the CPU’s strengths dominate the performance curve. At 1080p, this combo is heavily CPU-bound, while the GPU becomes the limiting factor only as resolution climbs. This analysis breaks down the measured FPS data to explain where the bottleneck lies and how to get the most out of this pairing.

Resolution Scaling

The FPS drop from 1080p to 4K is dramatic and reveals a textbook shift in system bottleneck. At 1080p with Low settings, the combo produces 234.8 FPS, but this plummets to 156.4 FPS at 1440p and further down to 87.3 FPS at 4K. This represents a 63% reduction in frame rate from 1080p to 4K at Low settings. The pattern is consistent across all quality presets: High settings drop from 142.2 FPS at 1080p to 98.1 FPS at 1440p and 55.2 FPS at 4K, while Ultra falls from 93.5 FPS to 67.3 FPS and then 34.8 FPS.

The steep decline between 1440p and 4K is particularly telling. At 1080p, the Ryzen 7 7800X3D’s 96 MB of shared L3 cache and high boost clock of 5.00 GHz are clearly feeding the GPU enough data to max out its frame output. However, the RTX 4070 SUPER’s 12 GB of GDDR6X memory and 504.2 GB/s bandwidth become the limiting factor as pixel count increases. The 4K Ultra result of 34.8 FPS is nearly unplayable, while 4K Low at 87.3 FPS is workable but far from the high-refresh territory the CPU can enable at lower resolutions. The scaling curve suggests that 1440p is the sweet spot for this combo, as it still delivers over 98 FPS on High settings, which is close to the 1080p High result of 142.2 FPS. The data indicates that Archeage’s draw calls and world rendering are far more sensitive to CPU throughput at lower resolutions, making the 7800X3D’s single-thread strength (3dmark_single_thread score of 959) the primary driver of the 1080p results.

GPU Role

The RTX 4070 SUPER’s role in this combo is defined by its memory subsystem and clock speeds, not raw compute. With a base clock of 1980 MHz and a boost clock of 2475 MHz, the GPU is fast enough to handle Archeage’s older DirectX 11-era rendering, but its 192-bit bus width is narrow by modern standards. The 12 GB memory capacity is sufficient for this MMORPG, but the 504.2 GB/s bandwidth is the hard ceiling at 4K Ultra, where the frame rate collapses to 34.8 FPS. The GPU’s 3dmark_steel_nomad_dx12 score of 4627 and passmark_g3d score of 29995 place it in the 84th percentile of all GPUs, but Archeage is not a graphically demanding title in terms of shader complexity.

The measured data shows that the GPU’s performance ceiling is reached at 4K High, where 55.2 FPS is achieved. Dropping to Medium at 4K yields 78.7 FPS, which is a 43% improvement over High, indicating that the GPU’s shading units (7168) and TMUs (224) are being taxed by texture quality and shadow resolution. At 1080p, the GPU is rarely the bottleneck, as even Ultra settings produce 93.5 FPS. The 21 Gbps effective memory speed helps at 1440p, where High settings hit 98.1 FPS, but the GPU’s 80 ROPs are likely the limiting factor for the 4K pixel fill rate. The data suggests that the GPU’s architectural strengths are underutilized in this game, as Archeage does not leverage the RT cores (56) or Tensor cores (224) for any measurable benefit.

How This Combo Ranks

Within the benchmark database, this specific CPU-GPU pairing ranks 291st out of 1727 tested combos for Archeage, placing it in the top 17% of all systems. This is a strong result, but not exceptional, given the hardware’s capabilities. The combo’s rank is likely held back by the 4K Ultra result, which drags down the average FPS across the tested resolution/settings matrix. The CPU itself sits in the 87th percentile of all CPUs, with an average benchmark score of 31580, while the GPU sits in the 84th percentile with an average score of 42576.

Comparing the CPU to its nearest rivals, the Ryzen 7 7800X3D is essentially tied with the Intel Core i7-12700F, showing only a 0.1% delta in average score. It also leads the AMD Ryzen 9 5980HX by 0.3% and the AMD Ryzen 7 8700G by 0.6%. This tight grouping means the 7800X3D isn’t a massive leap over these alternatives in synthetic tests, but its 3D V-Cache (96 MB L3) provides a distinct advantage in MMORPGs like Archeage, which often have large, frequently accessed world data. The GPU is similarly closely matched, with the RTX 4070 SUPER trailing the NVIDIA RTX A6000 by 0.2% and the AMD Radeon RX 7650 GRE by 0.3%, while leading the AMD Radeon Pro 580X by 1.4% and the NVIDIA Tesla M40 by 1.6%. The ranking of 291st suggests that, while this combo is very capable, there are many higher-end pairings (likely with RTX 4080-class GPUs) that achieve higher average FPS in this specific game.

Settings Recommendations

The measured data provides a clear hierarchy for optimal settings. At 1080p, Medium settings deliver 210.7 FPS, which is 77% higher than Ultra’s 93.5 FPS and only slightly below Low’s 234.8 FPS. For competitive play, Low is the best choice, but for general gameplay, Medium is the recommended preset because it offers a massive frame rate boost over High (142.2 FPS) while presumably retaining most visual quality. Ultra at 1080p is playable at 93.5 FPS, but the 55% drop from Medium suggests it imposes a heavy cost for marginal visual gains.

At 1440p, Medium provides 139.9 FPS, which is the best balance of speed and fidelity. High at 98.1 FPS is also excellent, and it may be preferable for players who want better shadows and textures. Ultra at 67.3 FPS is the edge of playability for a 60Hz monitor, but it is not recommended for high-refresh displays. At 4K, the choices are limited: Low (87.3 FPS) is the only preset that sustains a smooth frame rate, while Medium (78.7 FPS) is acceptable. High (55.2 FPS) and Ultra (34.8 FPS) are too inconsistent for a stable experience. The best experience per the measured rows is 1440p Medium, as it offers 139.9 FPS, which is close to the 1080p High result while providing higher resolution.

FAQ

Q: What is the best resolution for this combo to maintain above 100 FPS?

A: Based on the measured data, 1440p with Medium settings achieves 139.9 FPS, and 1080p with Medium settings achieves 210.7 FPS. 1440p High also stays above 98 FPS, making 1440p the highest resolution that consistently delivers high frame rates.

Q: Is Ultra settings ever viable with this setup?

A: At 1080p, Ultra yields 93.5 FPS, which is playable. At 1440p, Ultra drops to 67.3 FPS, and at 4K, it falls to 34.8 FPS. Ultra is only recommended at 1080p for a single-player experience, not for competitive play.

Q: How much faster is Low vs Ultra at the same resolution?

A: At 1080p, Low (234.8 FPS) is 151% faster than Ultra (93.5 FPS). At 1440p, Low (156.4 FPS) is 132% faster than Ultra (67.3 FPS). At 4K, Low (87.3 FPS) is 151% faster than Ultra (34.8 FPS).

Q: Does the CPU or GPU bottleneck this game at 1080p?

A: The data indicates a CPU bottleneck at 1080p, as frame rates are extremely high (up to 234.8 FPS), and the GPU is not fully taxed. The Ryzen 7 7800X3D’s single-thread performance drives these results.

Q: What is the combo’s rank among all tested systems?

A: This specific pairing ranks 291st out of 1727 tested combos for Archeage, placing it in the top 17% of all systems in the database.

Q: How does the RTX 4070 SUPER compare to its nearest rival, the RTX A6000?

A: The RTX 4070 SUPER scores 42576 on average, which is 0.2% lower than the RTX A6000’s average score of 42653. They are effectively tied in synthetic benchmarks.

CPU Role

The Ryzen 7 7800X3D is the star of this combo in Archeage, and its specifications explain why. With 8 cores and 16 threads based on the Zen 4 architecture, it has a base clock of 4.20 GHz and a boost clock of 5.00 GHz. The 96 MB of shared L3 cache is the defining feature, providing an enormous pool of fast memory for the game’s world data. The CPU’s 3dmark_single_thread score of 959 and passmark_single_thread score of 3759 are strong, but its 3dmark_8_threads score of 6539 is more relevant for MMORPGs, which often have multiple background threads. The Cinebench R23 multicore score of 29149 shows it can handle heavy loads, but Archeage is not a heavily threaded title.

The CPU’s percentile of 87% versus all CPUs, and its average benchmark score of 31580, places it just ahead of the Intel Core i7-12700F (31543, delta 0.1%) and AMD Ryzen 9 5980HX (31495, delta 0.3%). The 7800X3D’s advantage in this game comes from the L3 cache, which reduces memory latency when accessing the game world’s entities and textures. The measured FPS data supports this: at 1080p Low, the CPU is pushing 234.8 FPS, which is a massive output that relies on the cache to feed the GPU efficiently. The CPU’s memory bandwidth of 83.2 GB/s via dual-channel DDR5 is also sufficient, as the game does not require extreme memory throughput. In summary, the 7800X3D’s high single-thread speed and massive cache are perfectly suited for Archeage’s engine, making it the primary reason this combo performs so well at lower resolutions.