Archeage

Archeage

AVERAGE FPS
122
excellent

This combination delivers exceptional performance with an average of 122 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 60 84 92
1440p QHD 69 97 148 167
1080p Full HD 98 146 221 238

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 92
3840x2160 Medium 84
3840x2160 High 60
3840x2160 Ultra 39
2560x1440 Low 167
2560x1440 Medium 148
2560x1440 High 97
2560x1440 Ultra 69
1920x1080 Low 238
1920x1080 Medium 221
1920x1080 High 146
1920x1080 Ultra 98

Archeage with AMD Ryzen 7 5800XT + AMD Radeon RX 7900 XTX, In-Depth Analysis

The AMD Ryzen 7 5800XT and AMD Radeon RX 7900 XTX combination delivers a dominant performance in Archeage, placing in the top 13% of all tested combos. This pairing produces extremely high frame rates at mainstream resolutions, with the primary bottleneck appearing only at the most demanding 4K Ultra settings.

GPU Role — VRAM, clocks, and how they relate to this game's results

The Radeon RX 7900 XTX is the dominant component in this pairing, and its specifications explain the substantial frame rate headroom observed in the data. With a boost clock of 2498 MHz and 24 GB of GDDR6 memory on a 384-bit bus, the GPU provides 960.0 GB/s of bandwidth. This memory configuration is far beyond what Archeage requires, ensuring that texture streaming and memory allocation never become limiting factors at any tested resolution or settings level.

The GPU's architecture also plays a role. Based on RDNA 3.0 with 6144 shading units and 192 ROPs, the card delivers a pixel rate of 479.6 GPixel/s. This raw throughput directly translates into the high fill rates needed for Archeage's large-scale battles and water-heavy environments. The GPU's benchmark percentile of 85 places it well above the typical graphics card, and its nearest rivals show it is closely matched with the NVIDIA GeForce RTX 4070 Ti, trailing by only 2% in average benchmark score.

The clock behavior is telling. The game clock of 2365 MHz represents the sustained performance level during typical gaming loads, while the boost clock of 2498 MHz provides the extra headroom for burst activity. The measured FPS data indicates that even at 4K, the GPU rarely operates at its performance ceiling until the Ultra preset is applied, where the 38.8 average FPS shows the card finally encountering a workload that fully engages its capabilities.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

The measured data reveals a clear performance hierarchy across resolutions and settings. At 1920x1080, the results are exceptional across the board. The Low preset achieves 238 FPS, Medium reaches 220.9 FPS, and High manages 145.6 FPS. Even the most demanding Ultra preset at 1080p produces 98.4 FPS, which is more than sufficient for smooth gameplay.

Moving to 2560x1440, the frame rates remain highly playable. Low settings deliver 166.6 FPS, Medium produces 147.8 FPS, and High achieves 97.1 FPS. The Ultra preset at this resolution drops to 69.2 FPS, still comfortably above the 60 FPS threshold for fluid motion. The scaling from 1080p to 1440p shows a predictable reduction, with Low settings dropping by approximately 30% and High settings by about 33%.

At 3840x2160, the performance curve steepens. Low settings yield 91.8 FPS, Medium produces 84.4 FPS, and High drops to 59.5 FPS. The Ultra preset falls to 38.8 FPS, which is the only configuration in the entire dataset that approaches unplayable territory. The gap between Low and Ultra at 4K is substantial, representing a 53 FPS difference that highlights the dramatic impact of the Ultra preset's additional rendering demands.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 7 5800XT provides a solid foundation with 8 cores and 16 threads based on the Zen 3 architecture. With a base clock of 3.80 GHz and a boost clock of 4.80 GHz, the processor delivers strong single-thread performance that is critical for MMORPGs like Archeage, which rely heavily on game logic and network processing. The 32 MB of L3 cache helps maintain low latency for frequently accessed game data.

The CPU's benchmark results confirm its capability. In Cinebench R23, the processor scores 23794 in multicore and 3359 in single-core tests. The PassMark single-thread score of 3538 is particularly relevant for Archeage, as the game's engine typically uses a limited number of threads for main simulation tasks. The CPU's percentile ranking of 86 places it above most processors, and its nearest rivals show it is essentially tied with the AMD Ryzen 7 PRO 5755GE, which is only 0.1% different in average score.

The data suggests that the CPU is not the limiting factor in most scenarios. At 1080p Low settings, the 238 FPS result indicates the CPU can feed the GPU adequately even at extremely high frame rates. The 3DMark 16-thread score of 7683 and single-thread score of 959 show balanced performance across workloads, with the boost clock of 4.80 GHz providing the single-thread burst performance needed for Archeage's computational hotspots.

How This Combo Ranks — use comboRankInGame vs other tested combos

This specific combination of AMD Ryzen 7 5800XT and AMD Radeon RX 7900 XTX ranks 231 out of 1727 tested combos in Archeage. This places it in the top 13.4% of all tested configurations, indicating that it outperforms the vast majority of alternatives. The ranking reflects the balance between the CPU's strong single-thread performance and the GPU's massive rendering capacity.

The rank position suggests that while this is a high-performing configuration, there are 230 other combinations that achieve better results in this specific game. These superior combos likely feature newer processors with higher boost clocks or GPUs with even greater raw throughput. However, the 231st position still represents an excellent outcome, particularly when considering that Archeage is an older title from 2014 that may not fully utilize the capabilities of this modern hardware.

The gap between this combo and the top performers is not enormous based on the FPS data. At 1080p Ultra, the 98.4 FPS result shows headroom for higher refresh rate monitors. The fact that this combo sits in the top 13% while using a 2024-released CPU and a 2022-released GPU demonstrates that the hardware generation combination works effectively together for this game's engine.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The resolution scaling data reveals which component becomes the bottleneck at different settings. At Low settings, the frame rate drops from 238 FPS at 1080p to 166.6 FPS at 1440p, then to 91.8 FPS at 4K. This represents a 61% reduction from 1080p to 4K, indicating that the GPU is becoming progressively more loaded as resolution increases.

The High settings show a similar pattern with a steeper decline. From 145.6 FPS at 1080p, the frame rate falls to 97.1 FPS at 1440p and 59.5 FPS at 4K. This 59% reduction from 1080p to 4K suggests that the GPU is the primary limiter at these higher resolutions, as the CPU maintains adequate frame delivery even at 1080p.

The Ultra settings reveal the most dramatic scaling. The 98.4 FPS at 1080p drops to 69.2 FPS at 1440p and then collapses to 38.8 FPS at 4K. The 61% reduction from 1080p to 4K at Ultra settings confirms the GPU is the limiting component across all resolutions. The CPU's capability is demonstrated by the fact that even at 1080p, the Ultra preset does not achieve the high frame rates seen at Low settings, indicating that GPU rendering demands, not CPU limitations, are constraining performance.

Settings Recommendations — which preset gives the best experience per the measured rows

The data indicates that the High preset offers the most balanced experience across all resolutions. At 1080p, High delivers 145.6 FPS, which exceeds the refresh rate of most standard monitors. At 1440p, High produces 97.1 FPS, providing smooth gameplay on high refresh rate displays. Even at 4K, High maintains 59.5 FPS, which is just below the 60 FPS threshold but still playable for most users.

For users prioritizing maximum frame rates, the Low preset at 1440p provides 166.6 FPS, which is ideal for competitive play on 165Hz or 240Hz monitors. The Medium preset at 1440p offers 147.8 FPS, representing a reasonable middle ground between visual quality and performance. However, the visual quality difference between Low and High in Archeage is substantial, and the High preset's 97.1 FPS at 1440p is likely the better overall choice.

The Ultra preset is not recommended at any resolution due to its significant performance cost. At 4K, the 38.8 FPS result falls below acceptable playability standards. At 1440p, the 69.2 FPS is playable but the visual improvement over High does not justify the 28 FPS reduction. The data clearly shows that High settings provide the best balance, with 4K users accepting the 59.5 FPS result or dropping to 1440p for higher frame rates.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the best resolution and settings combination for this hardware in Archeage?

A: The High preset at 2560x1440 provides 97.1 FPS, offering an excellent balance of visual quality and smooth performance. For maximum frame rates, Low at 1920x1080 achieves 238 FPS, while 4K High delivers 59.5 FPS for users prioritizing resolution.

Q: How does this combo rank compared to other tested configurations?

A: This combination ranks 231 out of 1727 tested combos, placing it in the top 13.4% of all tested configurations for Archeage. This represents a strong result, though 230 combos achieve higher frame rates.

Q: Is the CPU or GPU the limiting factor in this game?

A: The GPU is the limiting component across all settings and resolutions. The frame rate drops from 238 FPS at 1080p Low to 91.8 FPS at 4K Low, and from 98.4 FPS at 1080p Ultra to 38.8 FPS at 4K Ultra, showing consistent GPU-bound scaling.

Q: What is the frame rate difference between Low and Ultra settings at 1440p?

A: At 2560x1440, Low settings achieve 166.6 FPS while Ultra settings produce 69.2 FPS. This represents a 97.4 FPS difference, indicating that Ultra settings impose a significant performance penalty of roughly 58% compared to Low.

Q: Can this hardware run Archeage at 4K with playable frame rates?

A: Yes, at 4K with High settings the average FPS is 59.5, which is marginally below the 60 FPS standard but still playable. Medium settings at 4K achieve 84.4 FPS, providing a more comfortable margin for smooth gameplay.

Q: How does the GPU compare to its nearest rival in average benchmark score?

A: The Radeon RX 7900 XTX has an average benchmark score of 44019, which is 2% lower than the NVIDIA GeForce RTX 4070 Ti at 44900. It also trails the AMD Radeon Pro 580 by 0.4% but leads the NVIDIA GeForce RTX 4090 Mobile by 0.8%.

Hardware Specifications

AMD Ryzen 7 5800XT

Cores / Threads 8 / 16
Base Clock 3800 MHz
Boost Clock 4800 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

AMD Radeon RX 7900 XTX

VRAM 24 GB GDDR6
Base Clock —
Boost Clock 2498 MHz MHz
TDP 355 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5800XT + AMD Radeon RX 7900 XTX in Archeage

Resolution Settings Avg FPS
3840x2160 Low 91.8
3840x2160 Medium 84.4
3840x2160 High 59.5
3840x2160 Ultra 38.8
2560x1440 Low 166.6
2560x1440 Medium 147.8
2560x1440 High 97.1
2560x1440 Ultra 69.2
1920x1080 Low 238.0
1920x1080 Medium 220.9
1920x1080 High 145.6
1920x1080 Ultra 98.4

Archeage with Ryzen 7 5800XT + Other GPUs

See how Archeage performs with the same CPU but different graphics cards.

Archeage with RX 7900 XTX + Other CPUs

See how Archeage performs with the same GPU but different processors.

Other Games with Ryzen 7 5800XT + RX 7900 XTX

Explore FPS benchmarks for other games using this same hardware combination.