Archeage
This combination provides smooth gameplay with an average of 79 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 25 | 37 | 54 | 61 |
| 1440p QHD | 44 | 65 | 95 | 107 |
| 1080p Full HD | 65 | 96 | 141 | 159 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 5 9600X + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis
Archeage, a 2014 MMORPG, places distinct demands on the AMD Ryzen 5 9600X and NVIDIA GeForce RTX 3060 Ti pairing. The measured data from this combination reveals a system that scales predictably with resolution and settings, though the performance ceiling varies significantly based on the workload. This analysis walks through the benchmark results to characterize the system's behavior within this specific title.
Resolution Scaling
The transition from 1080p to 4K demonstrates a classic shift in system bottleneck. At 1920x1080 with Low settings, the combo achieves 159 FPS, which drops to 107 FPS at 2560x1440 and further to 61 FPS at 3840x2160. This represents a 33% reduction in frame rate when moving from 1080p to 1440p, and a further 43% reduction when moving from 1440p to 4K. The scaling pattern indicates that at 1080p, the system is not fully constrained by the GPU, allowing the CPU and memory subsystem to push higher frame rates.
The High settings preset tells a similar story with different magnitudes. At 1080p High, the system produces 96 FPS. This falls to 65 FPS at 1440p, a 32% drop, and then to 37 FPS at 4K, a 43% drop from the 1440p figure. The consistency of these percentage reductions across Low and High settings suggests the rendering pipeline scales linearly with pixel count, which is typical for a game like Archeage where the GPU workload is primarily pixel-bound.
The Medium preset provides the only complete min/max data in the set. At 1080p Medium, the average is 141 FPS with a minimum of 120 FPS and maximum of 162 FPS. At 1440p Medium, the average drops to 95 FPS, with a minimum of 81 FPS and maximum of 109 FPS. At 4K Medium, the average falls to 54 FPS, with a minimum of 46 FPS and maximum of 63 FPS. The frame time consistency, as indicated by the min/max spread, remains relatively stable across resolutions, with the spread being roughly 30% of the average in each case.
The most demanding configuration, Ultra at 4K, yields only 25 FPS. This is a 61% reduction from the High preset at the same resolution, which itself only manages 37 FPS. The scaling from Medium to High at 4K shows a 31% performance hit, while High to Ultra shows a 32% hit. This suggests that the Ultra preset introduces disproportionately heavy effects that strain the GPU's resources.
What the resolution scaling reveals is that the RTX 3060 Ti becomes the limiting component as pixel count rises. At 1080p, the frame rates are high enough to suggest headroom in the GPU, allowing the CPU to feed frames efficiently. By 4K, the GPU is clearly saturated, as evidenced by the sub-60 FPS averages across all settings except Low. The 8 GB of VRAM and 448.0 GB/s of memory bandwidth are sufficient for 1080p and 1440p but become taxed at 4K, particularly with higher quality textures and effects.
How This Combo Ranks
Within the database of tested combinations for Archeage, this pairing of the Ryzen 5 9600X and RTX 3060 Ti ranks 1848 out of 3708 total combinations. This places it in the 50th percentile of all tested systems, indicating a mid-pack performance profile for this specific game. The rank is not a reflection of absolute hardware capability but rather how this particular pairing performs within the context of Archeage's engine and its demands.
The CPU component of this pairing sits in the 81st percentile among all tested CPUs, which is a strong showing. The Ryzen 5 9600X, with its 6 cores and 12 threads, demonstrates solid compute performance that rivals the AMD Ryzen 7 PRO 5755GE (0.2% faster), AMD Ryzen 7 7840H (0.5% slower), AMD Ryzen 7 5800XT (0.6% slower), and AMD Ryzen 7 8845HS (0.8% slower) in average benchmark scores. This places the CPU in a competitive tier, but the game's overall combination rank of 1848 suggests that the GPU is the primary constraint on final performance.
The GPU itself ranks in the 59th percentile among all tested GPUs. Its nearest rivals in average benchmark score include the AMD Radeon RX 9060 (0.7% faster), AMD Radeon Pro 5600M (1.4% slower), AMD Radeon RX 5700 XT (1.4% slower), and AMD Radeon R9 370X (1.7% faster). The RTX 3060 Ti's position in the lower-middle of the GPU distribution, combined with the CPU's upper-middle position, results in a system that is balanced but not exceptional for Archeage.
The data indicates that the combination rank is heavily influenced by the GPU's performance ceiling. At 1080p, where the CPU has more influence, the system achieves frame rates that would likely place it higher in the rankings. However, at 4K, where the GPU is fully saturated, the system's rank is dragged down by the GPU's inability to maintain high frame rates at higher resolutions. The rank of 1848 out of 3708 reflects this mixed performance profile, with strong CPU-driven results at lower resolutions and GPU-limited results at higher resolutions.
GPU Role
The NVIDIA GeForce RTX 3060 Ti is built on the Ampere architecture using an 8 nm process at Samsung. The GA104 chip contains 17,400 million transistors on a 392 mm² die, with a transistor density of 44.4M per mm². The GPU operates with a base clock of 1410 MHz and a boost clock of 1665 MHz, with memory running at 1750 MHz (14 Gbps effective). The 8 GB of GDDR6 memory is paired with a 256-bit bus, providing 448.0 GB/s of memory bandwidth.
In Archeage, the GPU's role is clearly demonstrated through the resolution scaling data. At 1080p Low, the GPU is not the limiting factor, allowing the system to reach 159 FPS. However, as resolution increases, the GPU becomes progressively more saturated. The gap between Low and Ultra settings at each resolution shows how the GPU handles increasing graphical loads. At 1080p, the difference between Low and Ultra is 94 FPS (159 vs 65), while at 4K, the difference narrows to 36 FPS (61 vs 25). This narrowing indicates that at higher resolutions, the GPU is already near its limit even at Low settings, leaving less headroom for additional graphical features.
The GPU's memory configuration plays a role in the performance at higher resolutions. With 8 GB of GDDR6 memory, the card has enough capacity for 1080p and 1440p gaming, but 4K with High or Ultra settings can approach the memory limit. The 448.0 GB/s bandwidth is adequate for the pixel throughput required at 1440p but becomes a constraint at 4K where texture fetching and frame buffer operations increase significantly.
The RTX 3060 Ti's compute capabilities, including 4864 shading units, 152 TMUs, and 80 ROPs, are exercised differently across settings. The pixel rate of 133.2 GPixel/s and texture rate of 253.1 GTexel/s determine how quickly the GPU can fill the screen with rendered pixels and apply textures. At 4K, the pixel rate becomes a bottleneck, as the GPU must output over 8 million pixels per frame, and the measured frame rates reflect this limitation.
FAQ
Q: What is the best resolution for this combo in Archeage?
A: The data shows 1920x1080 as the most playable resolution, with all settings except Ultra achieving above 96 FPS. At 2560x1440, the system still performs well with 65-107 FPS depending on settings, while 3840x2160 only reaches playable frame rates on Low settings (61 FPS).
Q: How does the Ryzen 5 9600X compare to its nearest rivals?
A: The Ryzen 5 9600X has an average benchmark score of 29713, which is 0.2% higher than the AMD Ryzen 7 PRO 5755GE, 0.5% higher than the AMD Ryzen 7 7840H, 0.6% higher than the AMD Ryzen 7 5800XT, and 0.8% higher than the AMD Ryzen 7 8845HS.
Q: What is the frame rate difference between Medium and High settings?
A: At 1080p, Medium averages 141 FPS while High averages 96 FPS, a 45 FPS difference. At 1440p, Medium averages 95 FPS while High averages 65 FPS, a 30 FPS difference. At 4K, Medium averages 54 FPS while High averages 37 FPS, a 17 FPS difference.
Q: Is the GPU or CPU the limiting factor at 4K?
A: The data indicates the GPU is the limiting factor at 4K. The frame rates drop below 61 FPS for all settings except Low, and the RTX 3060 Ti's 59th percentile ranking among GPUs suggests it cannot sustain high performance at this resolution.
Q: What is the performance difference between Low and Ultra at 1440p?
A: At 2560x1440, Low settings produce 107 FPS while Ultra produces 44 FPS, a difference of 63 FPS. This represents a 59% reduction in frame rate when moving from the lowest to the highest preset.
Q: How does the RTX 3060 Ti's benchmark score compare to its nearest rival?
A: The RTX 3060 Ti has an average benchmark score of 16129. The AMD Radeon RX 9060 scores 0.7% higher, the AMD Radeon Pro 5600M scores 1.4% lower, the AMD Radeon RX 5700 XT scores 1.4% lower, and the AMD Radeon R9 370X scores 1.7% higher.
Measured FPS Breakdown
At 1920x1080, the system demonstrates its highest performance. The Low preset achieves an average of 159 FPS, which is the maximum average frame rate across all tested configurations. The Medium preset delivers 141 FPS with a minimum of 120 FPS and maximum of 162 FPS, showing consistent frame delivery. High settings produce 96 FPS, while Ultra drops to 65 FPS. The 1080p results show a clear hierarchy where each settings increase brings a measurable performance cost.
Moving to 2560x1440, the performance scales down proportionally. Low settings maintain a strong 107 FPS average, ensuring smooth gameplay. Medium settings average 95 FPS, with a minimum of 81 FPS and maximum of 109 FPS, indicating some frame time variability but still within playable ranges. High settings produce 65 FPS, which is acceptable for most players. Ultra settings drop to 44 FPS, which may feel less smooth in fast-paced scenarios. The 1440p results show that the system can handle this resolution well at lower settings but struggles with the highest preset.
At 3840x2160, the system's limitations become apparent. Low settings are the only preset to achieve an average above 60 FPS, with 61 FPS. Medium settings average 54 FPS, with a minimum of 46 FPS and maximum of 63 FPS, showing significant frame time variation. High settings drop to 37 FPS, which is below the threshold for smooth gameplay in most situations. Ultra settings produce only 25 FPS, making this configuration impractical for 4K gaming. The 4K results highlight the GPU's constraints at this resolution.
The complete dataset across all resolutions and settings provides a clear picture of the system's capabilities. The best performance is found at 1080p Low with 159 FPS, while the worst is at 4K Ultra with 25 FPS. The Medium preset at 1080p offers the best balance of performance and visual quality, with 141 FPS average and a tight min/max range of 120-162 FPS.
CPU Role
The AMD Ryzen 5 9600X is a 6-core, 12-thread processor from the 9000 series, built on the Zen 5 architecture with the Granite Ridge codename. It operates with a base clock of 3.90 GHz and a boost clock of 5.40 GHz, with a 65 W TDP. The CPU supports DDR5 memory in a dual-channel configuration, providing 89.6 GB/s of memory bandwidth. The 32 MB shared L3 cache and 1 MB L2 cache per core support the CPU's ability to handle game logic and physics calculations.
In Archeage, the CPU's role is most apparent at lower resolutions where the GPU is not the bottleneck. At 1080p Low, the system achieves 159 FPS, which is likely near the engine's maximum frame rate for this CPU. The Ryzen 5 9600X's single-thread performance, as indicated by a 3dmark single-thread score of 1253 and Cinebench R23 single-core score of 2183.5, is crucial for MMORPGs like Archeage, which often have significant single-threaded game logic. The CPU's 81st percentile ranking among all tested CPUs confirms its strong performance in this area.
The multi-threaded capabilities of the CPU, demonstrated through Cinebench R23 multicore score of 17528.5 and Geekbench multicore score of 14438, help maintain frame rates when multiple AI agents, players, or environmental effects are active. The 3dmark tests show scaling from 2456 (2 threads) to 7590 (max threads), indicating the CPU can effectively utilize additional threads when needed. This scalability is important for MMORPGs where crowded areas can create high CPU demand.
At higher resolutions, the CPU's influence diminishes as the GPU becomes the limiting factor. The frame rates at 4K are consistent with GPU-bound scenarios, where the CPU can supply frames faster than the GPU can render them. However, the CPU's performance ensures that the system does not introduce additional bottlenecks at any resolution, allowing the GPU to operate at its full potential. The data shows that the Ryzen 5 9600X is more than capable of supporting the RTX 3060 Ti in this game.
Settings Recommendations
The measured data provides clear guidance for optimal settings based on resolution. At 1920x1080, the Medium preset offers the best experience, delivering 141 FPS average with a minimum of 120 FPS. This provides a significant performance buffer above the 60 FPS threshold while maintaining visual quality. The High preset at 96 FPS is also viable for players who prefer higher visual fidelity, though the 45 FPS difference from Medium may be noticeable in fast-paced combat.
For 2560x1440, Medium settings provide a strong 95 FPS average, with a minimum of 81 FPS ensuring smooth gameplay in most situations. The Low preset at 107 FPS offers additional headroom for players with high refresh rate monitors, while High at 65 FPS remains playable but with less margin for performance drops. Ultra at 44 FPS is not recommended for this resolution due to the risk of frame rate drops below smooth gameplay thresholds.
At 3840x2160, the options are more limited. Low settings at 61 FPS are the only preset that maintains an average above 60 FPS, making it the recommended choice for 4K gaming. Medium at 54 FPS is borderline playable but may experience noticeable stuttering during intense scenes. High and Ultra settings at 37 FPS and 25 FPS respectively are not recommended for 4K, as they fall below acceptable playability standards.
For the best overall experience, the Medium preset at 1080p provides the optimal balance of performance and visual quality. Players with high refresh rate monitors should consider the Low preset at 1080p for maximum frame rates, while those prioritizing visual fidelity at lower resolutions can use High settings. The data consistently shows that the Ultra preset offers diminishing returns in visual quality relative to its significant performance cost across all resolutions.
Hardware Specifications
AMD Ryzen 5 9600X
NVIDIA GeForce RTX 3060 Ti
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 9600X + NVIDIA GeForce RTX 3060 Ti in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 61.0 |
| 3840x2160 | Medium | 54.0 |
| 3840x2160 | High | 37.0 |
| 3840x2160 | Ultra | 25.0 |
| 2560x1440 | Low | 107.0 |
| 2560x1440 | Medium | 95.0 |
| 2560x1440 | High | 65.0 |
| 2560x1440 | Ultra | 44.0 |
| 1920x1080 | Low | 159.0 |
| 1920x1080 | Medium | 141.0 |
| 1920x1080 | High | 96.0 |
| 1920x1080 | Ultra | 65.0 |
Archeage with Ryzen 5 9600X + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RTX 3060 Ti + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 5 9600X + RTX 3060 Ti
Explore FPS benchmarks for other games using this same hardware combination.