Archeage
This combination provides smooth gameplay with an average of 66 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 22 | 29 | 45 | 52 |
| 1440p QHD | 37 | 54 | 80 | 88 |
| 1080p Full HD | 57 | 83 | 118 | 135 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 5 9600X + AMD Radeon RX 7600 XT, In-Depth Analysis
The measured data set for Archeage pairs the AMD Ryzen 5 9600X with the AMD Radeon RX 7600 XT across three resolutions and four settings. The combo ranks 1131 out of 1727 tested combinations, while the CPU sits at the 85th percentile of all CPUs and the GPU at the 63rd percentile of all GPUs. The CPU's synthetic average is 28246; the GPU's synthetic average is 20146. The game itself is listed as an MMORPG, and the measured FPS rows are flagged as measured data.
Resolution Scaling
FPS drops steadily as resolution increases at every settings level. At Low, the averages are 134.7 at 1920x1080, 87.5 at 2560x1440, and 51.5 at 3840x2160. Medium follows the same downward path: 118.2, then 79.7, then 44.5. High goes from 83 down to 53.8 and then 29.2. Ultra begins at 56.5, falls to 36.5, and ends at 22.4 at 3840x2160.
The pattern across all four presets is consistent: 2560x1440 is a visible step down, but 3840x2160 is a much larger drop. Even Low at 3840x2160 only manages 51.5, while Low at 1920x1080 reaches 134.7. The same Low preset loses a large portion of its average FPS when moving to 4K, which suggests that rendering resolution is a heavy load for this combination. At 1440p, Low and Medium remain reasonably close together at 87.5 and 79.7, while High and Ultra fall to 53.8 and 36.5. This implies that settings still matter at 1440p, but the resolution cost is becoming the dominant factor by 3840x2160.
Because the FPS penalty is present even on Low settings, the GPU appears to be the limiting component at 3840x2160. The CPU can help produce 134.7 at 1080p Low, but that same CPU with the same GPU cannot reach that level once the resolution climbs. The data points to a configuration where 1080p offers headroom, 1440p is usable, and 4K requires Low settings to stay near playable averages.
GPU Role
The Radeon RX 7600 XT is based on RDNA 3.0 with the Navi 33 chip. It has 2048 shading units, 128 texture mapping units, 64 ROPs, and 32 RT cores. Clock speeds are listed at 1980 MHz base, 2470 MHz game, and 2755 MHz boost. The memory subsystem uses 16 GB of GDDR6 on a 128-bit bus, with memory clocks at 2250 MHz and 18 Gbps effective, producing 288.0 GB/s of bandwidth.
Those specifications sit behind the measured game results. At 1080p Low, the GPU helps reach 134.7 average FPS. At 1080p Ultra, that average drops to 56.5. At 3840x2160, even Low falls to 51.5, with Ultra all the way down to 22.4. The clock speeds are high, but the 128-bit bus and 288.0 GB/s bandwidth are part of the context for why 4K averages are so much lower.
The GPU's synthetic benchmark average is 20146, and its nearest rivals in the database are tightly clustered. The AMD Radeon RX 460 averages 20088 with a deltaPct of 0.3, the AMD Radeon RX 7600 averages 20258 with a deltaPct of -0.6, the NVIDIA GeForce RTX 2060 SUPER averages 19774 with a deltaPct of 1.9, and the NVIDIA GeForce RTX 3070 Mobile averages 20534 with a deltaPct of -1.9. The RX 7600 XT also scores 2348 in 3DMark Steel Nomad DX12, 83114 in Geekbench OpenCL, 88301 in Geekbench Vulkan, and 17132 in PassMark G3D.
The 16 GB frame buffer is notable, but the measured rows do not include VRAM usage or minimum FPS. Therefore, the data does not show whether the 16 GB capacity changes Archeage behavior directly. It simply shows that this GPU, with its clock and memory configuration, produces the average FPS values listed for each resolution and settings combination.
CPU Role
The Ryzen 5 9600X has 6 cores and 12 threads, with a base clock of 3.90 GHz and a boost clock of 5.40 GHz. It belongs to the Zen 5 Granite Ridge architecture on a 4 nm process. Cache is listed as 80 KB of L1 per core, 1 MB of L2 per core, and 32 MB of shared L3. The platform supports DDR5 dual-channel memory with 89.6 GB/s bandwidth.
The CPU's synthetic average is 28246, and its nearest rivals are close. The Intel Core i5-13490F averages 28173 with a deltaPct of 0.3, the AMD Ryzen 5 230 averages 28164 with a deltaPct of 0.3, the AMD Ryzen 7 8845HS averages 28369 with a deltaPct of -0.4, and the Intel Core i5-14500T averages 28377 with a deltaPct of -0.5. The CPU also posts strong per-thread results: Cinebench R23 single-core is 3603, Cinebench R20 single-core is 1513, Geekbench single-core is 3363, and PassMark single-thread is 4570. Multi-thread scores include Cinebench R23 multi-core 25525, Geekbench multi-core 15182, PassMark multithread 30027, and 3DMark max threads 7590.
In the game data, the highest measured average is 134.7 at 1080p Low. That result suggests the CPU is capable of driving high frame rates when the render load is lower. The fact that the same preset at 3840x2160 drops to 51.5 indicates that the CPU is not the main constraint at high resolution. If the 6-core/12-thread CPU were the bottleneck, the resolution change would have a smaller effect. Instead, the CPU appears to have enough performance to feed the GPU at 1080p, while the GPU struggles to maintain the same throughput as resolution rises.
How This Combo Ranks
The combo's in-game rank is 1131 out of 1727 tested combinations. That places it in the lower portion of the Archeage combo pool. This is notable because the individual components rank higher in their own synthetic categories: the CPU is at the 85th percentile, and the GPU is at the 63rd percentile.
The distance between component percentiles and the in-game rank suggests that component-level synthetic position does not automatically translate into a strong game-specific result. The CPU's nearest rivals are separated by only 0.3, 0.3, -0.4, and -0.5 deltaPct, and the GPU's nearest rivals are separated by 0.3, -0.6, 1.9, and -1.9 deltaPct. Those are tight clusters, meaning the component performance class is well defined. Still, in Archeage, this exact pairing ends up below the majority of tested combos.
The data set only includes measured FPS for this exact combo, not for the nearest rival pairings. Therefore, the rank comparison is direct: among the 1727 combos tested in this game, this one lands at 1131.
Measured FPS Breakdown
The following table reproduces the measured average FPS rows exactly as listed in the data set.
| Resolution | Settings | Average FPS |
| --- | --- | --- |
| 1920x1080 | Low | 134.7 |
| 1920x1080 | Medium | 118.2 |
| 1920x1080 | High | 83 |
| 1920x1080 | Ultra | 56.5 |
| 2560x1440 | Low | 87.5 |
| 2560x1440 | Medium | 79.7 |
| 2560x1440 | High | 53.8 |
| 2560x1440 | Ultra | 36.5 |
| 3840x2160 | Low | 51.5 |
| 3840x2160 | Medium | 44.5 |
| 3840x2160 | High | 29.2 |
| 3840x2160 | Ultra | 22.4 |
The table shows a clear hierarchy: 1080p is the strongest resolution, 1440p is a middle ground, and 4K is the weakest. The minimum and maximum FPS fields are null for every row, so the analysis relies on average FPS only.
Settings Recommendations
At 1920x1080, Low produces the highest measured average at 134.7, followed by Medium at 118.2 and High at 83. Ultra drops to 56.5. Among those rows, High is the strongest visual setting that keeps the average above the Ultra result by a wide margin. If the goal is maximum measured FPS, Low is the data-backed choice.
At 2560x1440, Low and Medium stay close at 87.5 and 79.7. High falls to 53.8 and Ultra to 36.5. The data supports Medium as a reasonable ceiling for 1440p if the user wants higher settings without falling to the High or Ultra averages. For anyone prioritizing FPS at 1440p, Low is the strongest measured option.
At 3840x2160, Low is the best measured preset at 51.5. Medium drops to 44.5, High to 29.2, and Ultra to 22.4. The measured rows indicate that 4K should be paired with Low settings if the target is the highest average FPS available at that resolution.
FAQ
Q: What average FPS does this combo produce at 1080p with Ultra settings?
A: The measured average is 56.5.
Q: Which 4K setting gives the highest average FPS?
A: Low, at 51.5. Medium is 44.5, High is 29.2, and Ultra is 22.4.
Q: What is the combo's rank in Archeage?
A: It ranks 1131 out of 1727 tested combinations.
Q: Does the data set include minimum or maximum FPS?
A: No. The minFps and maxFps fields are null for every measured row.
Q: How close are the CPU's nearest rivals in synthetic average score?
A: The Ryzen 5 9600X averages 28246. The Intel Core i5-13490F averages 28173 with a deltaPct of 0.3, the AMD Ryzen 5 230 averages 28164 with a deltaPct of 0.3, the AMD Ryzen 7 8845HS averages 28369 with a deltaPct of -0.4, and the Intel Core i5-14500T averages 28377 with a deltaPct of -0.5.
Q: What are the highest and lowest measured FPS values in the set?
A: The highest is 134.7 at 1920x1080 Low, and the lowest is 22.4 at 3840x2160 Ultra.
Hardware Specifications
AMD Ryzen 5 9600X
AMD Radeon RX 7600 XT
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 9600X + AMD Radeon RX 7600 XT in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 51.5 |
| 3840x2160 | Medium | 44.5 |
| 3840x2160 | High | 29.2 |
| 3840x2160 | Ultra | 22.4 |
| 2560x1440 | Low | 87.5 |
| 2560x1440 | Medium | 79.7 |
| 2560x1440 | High | 53.8 |
| 2560x1440 | Ultra | 36.5 |
| 1920x1080 | Low | 134.7 |
| 1920x1080 | Medium | 118.2 |
| 1920x1080 | High | 83.0 |
| 1920x1080 | Ultra | 56.5 |
Archeage with Ryzen 5 9600X + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RX 7600 XT + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 5 9600X + RX 7600 XT
Explore FPS benchmarks for other games using this same hardware combination.