Archeage

The AMD Ryzen 5 8400F and Intel Arc B390 combination ranks near the bottom of the database for Archeage, landing at position 2453 out of 2761 tested combos. This places the pairing in the bottom 11% of all systems evaluated, a poor result that reflects the GPU’s severe performance limitations in this title. The Intel Arc B390, with its 9th percentile ranking among all GPUs, is the clear bottleneck, dragging down an otherwise competent processor into unplayable territory at higher settings and resolutions.

How This Combo Ranks

The combo’s rank of 2453 out of 2761 tested combinations signals a fundamentally unbalanced pairing for Archeage. With only 308 combos performing worse, this system sits dangerously close to the bottom of the performance pool. The data shows that the GPU’s 9th percentile standing among all graphics cards directly dictates this outcome, as the CPU’s 77th percentile ranking suggests it is capable of much more than the Arc B390 allows. In practical terms, this means the system will struggle to maintain playable frame rates even at moderate settings, and users should expect a severely compromised experience in Archeage’s large-scale battles and crowded zones.

The delta between the components is stark. The Ryzen 5 8400F averages 25005 in CPU benchmarks, placing it within 0.4% of the AMD EPYC 9474F and 0.2% ahead of the AMD Ryzen 5 7500F. Meanwhile, the Arc B390’s average benchmark score of 1482 puts it just 1.3% ahead of the NVIDIA GeForce GT 520MX and 2.7% ahead of the GeForce GT 710. This pairing combines a top-quartile processor with a bottom-decile graphics solution, creating a system where the GPU cannot possibly feed the display with enough frames to justify the CPU’s presence. The result is a combo that ranks poorly not because both parts are weak, but because one part is catastrophically underpowered relative to the other.

GPU Role

The Intel Arc B390 is an integrated graphics solution built on the Xe3-LPG architecture, manufactured on Intel’s 3 nm process. Its performance profile in the 3DMark Steel Nomad DX12 test yields a score of 1482, which places it in the 9th percentile of all GPUs — a figure that effectively marks it as entry-level at best. The GPU’s nearest rivals include the NVIDIA GeForce GT 520MX (1.3% slower), GeForce 800M (1.5% slower), GT 625 OEM (2.5% slower), and GT 710 (2.7% slower), all of which are legacy or low-end parts from a bygone era.

The Arc B390 operates with a base clock of 300 MHz and a boost clock of 2500 MHz, yet its memory configuration is the most limiting factor: it uses System Shared memory, with bandwidth described as System Dependent. This means the GPU relies entirely on the CPU’s DDR5 memory subsystem, which for the Ryzen 5 8400F provides 83.2 GB/s of dual-channel bandwidth. In Archeage, this shared memory arrangement creates a fundamental throughput problem, as the GPU must compete with the CPU for the same memory resources. The measured FPS data confirms this, with the card managing only 71 FPS at 1080p Low, dropping to 43 FPS at 1080p High, and collapsing to 17 FPS at 4K High.

The GPU’s compute specifications — 1536 shading units, 48 TMUs, 24 ROPs, and 12 ray tracing cores — yield a pixel rate of 60.00 GPixel/s and a texture rate of 120.0 GTexel/s. While these numbers appear modest on paper, the real-world impact in Archeage is devastating. At 4K Ultra, the system produces just 11 FPS, which is effectively a slideshow. The GPU’s 80 W TDP and IGP slot width indicate it is designed for portable or low-power devices, not for driving a demanding MMORPG at high resolutions.

CPU Role

The AMD Ryzen 5 8400F provides a solid foundation for gaming, though its potential is entirely wasted in this configuration. Based on the Zen 4 architecture with the Phoenix codename, this 6-core, 12-thread processor runs at a base clock of 4.20 GHz and boosts up to 4.70 GHz. It features 16 MB of shared L3 cache, 1 MB of L2 per core, and 64 KB of L1 per core, with a 65 W TDP. The processor’s 77th percentile ranking among all CPUs indicates it sits comfortably in the upper tier of desktop processors, with an average benchmark score of 25005.

In synthetic benchmarks, the 8400F demonstrates strong multi-threaded performance, scoring 20851 in Cinebench R23 multi-core and 8757 in Cinebench R20 multi-core. Single-thread performance is also respectable, with a Cinebench R23 single-core score of 2943 and a 3DMark single-thread score of 951. The processor’s nearest CPU rivals include the AMD Ryzen 5 7500F (0.2% faster), Intel Core i7-11850H (0.3% faster), Intel Core i7-13620H (0.4% faster), and AMD EPYC 9474F (0.4% slower) — all of which are statistically tied in performance.

For Archeage, an MMORPG that relies heavily on single-thread performance for game logic and network handling, the 8400F’s strong single-core results should be sufficient. However, the CPU’s capabilities are irrelevant when the GPU cannot render frames fast enough to utilize them. The data shows that at 1080p Low, the system achieves 71 FPS, which suggests the CPU can push well beyond that if the GPU allowed it. The bottleneck is so pronounced that even at 4K Low, the system only manages 28 FPS — a figure that indicates the GPU is the sole limiting factor across all settings and resolutions.

FAQ

Q: Is the AMD Ryzen 5 8400F a good match for the Intel Arc B390 in Archeage?

A: No. The CPU ranks in the 77th percentile of all processors, while the GPU ranks in the 9th percentile. This massive disparity creates a system where the GPU cannot keep up with the CPU, resulting in a combo rank of 2453 out of 2761 tested systems.

Q: What are the best frame rates achievable with this combo?

A: The highest average FPS recorded is 71 at 1080p with Low settings. At 1080p Medium, the average drops to 64 FPS, and at 1080p High it falls to 43 FPS. At 4K Ultra, the system manages only 11 FPS.

Q: How does the GPU compare to its closest rivals?

A: The Intel Arc B390 scores 1482 in 3DMark Steel Nomad DX12, which is 1.3% ahead of the NVIDIA GeForce GT 520MX, 1.5% ahead of the GeForce 800M, 2.5% ahead of the GT 625 OEM, and 2.7% ahead of the GT 710. All of these are legacy low-end parts.

Q: How does the CPU compare to its nearest rivals?

A: The Ryzen 5 8400F’s average benchmark score of 25005 is 0.2% behind the AMD Ryzen 5 7500F, 0.3% behind the Intel Core i7-11850H, 0.4% behind the Intel Core i7-13620H, and 0.4% ahead of the AMD EPYC 9474F.

Q: What is the best resolution for this combo in Archeage?

A: 1080p is the only resolution that produces playable frame rates. At 1080p Low, the system averages 71 FPS, and at 1080p Medium it averages 64 FPS. At 1440p, even Low settings only reach 48 FPS, and at 4K, all settings produce sub-30 FPS results.

Q: Does the GPU’s shared memory configuration affect performance?

A: Yes. The Intel Arc B390 uses System Shared memory with System Dependent bandwidth, meaning it relies on the CPU’s DDR5 memory. This creates contention for memory resources and severely limits performance in memory-intensive scenes common in MMORPGs.

Resolution Scaling

The performance drop from 1080p to 4K reveals a GPU that is completely overwhelmed by higher resolutions. At 1080p Low, the system achieves 71 FPS, which drops to 48 FPS at 1440p Low (a 32% decrease) and then to 28 FPS at 4K Low (a 61% decrease from 1080p). This scaling pattern is characteristic of a GPU that has exhausted its pixel throughput capabilities well before reaching 4K.

The medium settings tell a similar story: 64 FPS at 1080p, 43 FPS at 1440p, and 25 FPS at 4K. The high settings show 43 FPS at 1080p, 29 FPS at 1440p, and 17 FPS at 4K. Across all settings, the 4K results are 60-75% lower than the 1080p results, indicating that the Arc B390’s 24 ROPs and 60.00 GPixel/s pixel rate are simply insufficient for 4K rendering. The data shows that the GPU is the limiting component at every resolution, as the CPU’s performance headroom is never the constraint.

The ultra settings present the most extreme case, with 29 FPS at 1080p, 20 FPS at 1440p, and 11 FPS at 4K. These figures demonstrate that the GPU’s fixed function units are saturated even at 1080p when image quality is maximized. The scaling from 1080p to 4K at ultra settings (a 62% drop) mirrors the low settings drop (61%), confirming that resolution, not settings, is the primary factor determining performance. The limiting component is unequivocally the GPU, as the Ryzen 5 8400F’s strong single-thread and multi-thread scores would easily support higher frame rates if the graphics card could render them.

Settings Recommendations

For this combo, the data supports only one viable configuration for a playable experience: 1080p with Low settings. The 71 FPS average at this setting is the only result that clears the 60 FPS threshold commonly considered smooth for MMORPG gameplay. At 1080p Medium, the average drops to 64 FPS, which remains playable but shows the system is already straining. The 1080p Medium results include a minimum FPS of 54 and a maximum of 73, indicating noticeable frame time variance that could cause stuttering in busy areas.

At 1080p High, the average falls to 43 FPS, which is below the 60 FPS target and likely to feel sluggish in Archeage’s combat scenarios. The 1440p resolution is not recommended, as even Low settings produce only 48 FPS, and Medium drops to 43 FPS. The 4K resolution is entirely unsuitable, with all settings producing an average below 30 FPS. The measured data shows that the optimal settings preset is Low at 1080p, as it provides the highest frame rate and the most headroom for the game’s dynamic environments where player counts and effects can cause performance to fluctuate.

Users who prioritize visual quality over frame rate might consider 1080p Medium as a compromise, accepting the 64 FPS average and the risk of dips to 54 FPS. However, the 71 FPS at Low settings offers the best balance of responsiveness and stability, especially given that the GPU’s 9th percentile ranking suggests it has no additional performance reserves. The recommendation is clear: run Archeage at 1080p with Low settings to achieve the smoothest experience this hardware can deliver.