Archeage

# Resolution Scaling

The measured FPS data for Archeage with the AMD Ryzen 9 5900X and AMD Radeon RX 9060 shows a steep performance cliff as resolution climbs. At 1080p with Low settings, the combo produces 142 FPS average. Moving to 1440p Low drops that to 95 FPS, a 33% reduction. Pushing to 4K Low yields just 55 FPS, which is 61% below the 1080p Low figure. This scaling pattern indicates that the GPU becomes the dominant bottleneck at higher resolutions, as the pixel throughput requirements outpace what the Radeon RX 9060 can deliver.

The Medium settings row provides the most complete picture, as it includes min and max FPS values at every resolution. At 1080p Medium, the average sits at 126 FPS with a range of 107 to 145 FPS. At 1440p Medium, the average falls to 85 FPS with a range of 72 to 98 FPS. At 4K Medium, the average drops to 49 FPS with a range of 41 to 56 FPS. The step from 1080p to 1440p costs 41 FPS (a 32.5% drop), while the step from 1440p to 4K costs another 36 FPS (a 42.4% drop). The increasingly steep percentage losses at higher resolutions point directly at the GPU's 8 GB memory buffer and 128-bit bus as limiting factors.

High settings tell a similar story with slightly lower absolute numbers. The 1080p High average is 86 FPS, 1440p High is 58 FPS, and 4K High is 33 FPS. The 4K High result falls below the 60 FPS threshold that many players consider playable, and even the 1440p High result is marginal for smooth gameplay on high-refresh-rate displays. The Ultra preset is the most demanding, with 1080p Ultra at 58 FPS, 1440p Ultra at 39 FPS, and 4K Ultra at just 23 FPS. This resolution scaling behavior suggests that the RX 9060 is best suited for 1080p gaming in Archeage, with 1440p viable only at lower presets.

# GPU Role

The AMD Radeon RX 9060 is built on the RDNA 4.0 architecture with the Navi 44 chip, manufactured on a 4 nm process at TSMC. The GPU packs 1,792 shading units, 112 texture mapping units, and 64 raster operation pipelines, along with 28 RT cores. Its boost clock reaches 2990 MHz, with a game clock of 2400 MHz and a base clock of 1700 MHz. The memory subsystem consists of 8 GB of GDDR6 on a 128-bit bus, delivering 288.0 GB/s of bandwidth. This configuration is modest by modern standards, and the benchmark data reflects that in Archeage's performance.

The GPU's percentile ranking among all tested GPUs is 59, placing it slightly above the median. Its average benchmark score is 16,014, which puts it in the same neighborhood as the NVIDIA GeForce RTX 3060 Ti (average score 16,129, a 0.7% delta), the AMD Radeon R9 370X (15,862, 1% delta), and the AMD Radeon RX 7700 (15,852, 1% delta). The RX 9060 sits just below the RTX 3060 Ti in raw benchmark terms, which contextualizes its Archeage performance as mid-range.

In Archeage specifically, the GPU's role becomes increasingly dominant as resolution rises. At 4K Ultra, the combo manages only 23 FPS, which is a clear indicator that the graphics card cannot sustain the pixel and shading workload at that setting. The 8 GB VRAM capacity is likely a contributing factor, as Archeage at 4K with high-detail textures can exceed that buffer, causing the GPU to rely on slower memory transfers. The 128-bit memory bus further constrains bandwidth, which is critical in an MMORPG with large open-world environments and many on-screen characters.

The measured FPS at 1440p and 1080p shows the GPU has enough headroom for medium-to-high settings at lower resolutions. At 1080p Medium, the 126 FPS average indicates the GPU is not the primary limiter, and the CPU is likely taking on more of the workload. However, at 4K any preset above Low produces sub-60 FPS, and even Low only reaches 55 FPS. This makes the RX 9060 a capable 1080p card for Archeage, a marginal 1440p card, and a poor 4K option.

# CPU Role

The AMD Ryzen 9 5900X is a 12-core, 24-thread processor from the 5000 series, based on the Zen 3 architecture with the Vermeer codename. It runs on the AMD Socket AM4 platform with a base clock of 3.70 GHz and a boost clock of 4.80 GHz. The CPU has 64 MB of L3 cache and supports dual-channel DDR4 memory with a bandwidth of 51.2 GB/s. Its 105 W TDP and 7 nm TSMC process node make it a power-efficient high-core-count part for its generation.

In synthetic benchmarks, the 5900X performs strongly. Its Cinebench R23 multi-core score is 16,262, and its single-core score is 1,527. Geekbench results show 14,118 multi-core and 2,083 single-core. The 3DMark scores scale from 941 single-thread to 10,075 max-threads. The PassMark multi-thread score is 39,002, and the single-thread score is 3,469. The CPU's percentile ranking versus all CPUs is 87, placing it in the top 13% of processors tested. Its average benchmark score is 41,376, which is nearly identical to its nearest rivals: the Intel Core Ultra 7 366H (41,263, 0.3% delta), the Intel Core Ultra 7 356H (41,215, 0.4% delta), and the AMD Ryzen AI 5 PRO 440 (41,208, 0.4% delta). The Intel Core i7-14650HX scores slightly higher at 41,576, a -0.5% delta relative to the 5900X.

In Archeage, the CPU's high core count and strong single-thread performance matter because MMORPGs often have many NPCs, player characters, and world events that can stress the processor. The data shows that at 1080p Low, the combo reaches 142 FPS, which is the highest measured result across all resolutions and settings. This high frame rate at a low graphical load suggests the CPU is capable of driving the game engine well above 60 FPS when not constrained by the GPU. At 1080p Medium, the 126 FPS average with a minimum of 107 FPS indicates the CPU can maintain a stable frame rate even with moderate GPU load. The 5900X's 12 cores and 24 threads provide ample headroom for background tasks and game logic, though Archeage is not likely to use all cores efficiently given its 2014 release date.

The bottleneck shifts at higher resolutions, where the GPU becomes the limiting factor. At 4K Ultra, the 23 FPS result is far below what the CPU could theoretically support, confirming that the graphics card is the primary constraint in that scenario. The CPU's role is most visible at 1080p Low, where the 142 FPS average shows the processor can push the engine to high frame rates, and the GPU is not yet saturated.

# How This Combo Ranks

The combination of the AMD Ryzen 9 5900X and AMD Radeon RX 9060 ranks 1,603 out of 2,761 tested combos in Archeage. This places the pairing in the 58th percentile of all CPU-GPU combinations tested, meaning roughly 42% of tested combos perform better in this game. The rank reflects the balance between the strong CPU and mid-range GPU; the 5900X is a high-end processor, but the RX 9060's 59th percentile GPU ranking drags the overall combo down to a middle-of-the-pack position.

The gap between the CPU's 87th percentile and the GPU's 59th percentile is significant. In games like Archeage that are more GPU-bound at higher resolutions, the combo's rank is likely suppressed by the GPU's limitations. If the RX 9060 were paired with a weaker CPU, the rank might be similar or slightly worse, but the 5900X ensures that the combo never becomes CPU-limited at 1080p or 1440p. The data suggests that the combo has a higher effective ranking at 1080p, where the GPU can keep up with the CPU, and a lower effective ranking at 4K, where the GPU holds the system back.

The combo's rank of 1,603 out of 2,761 means it sits just above the median. This is consistent with the GPU's mid-range positioning, as the RX 9060's nearest rivals are all similarly performing cards. The RTX 3060 Ti, which has a 0.7% higher average benchmark score, would likely rank slightly better in Archeage, while the R9 370X and RX 7700 would rank slightly worse given their 1% lower scores. The CPU's strong performance does not fully compensate for the GPU's limitations at high resolutions, which is why the combo does not break into the top half of rankings.

# Measured FPS Breakdown

The measured FPS data covers three resolutions (1920x1080, 2560x1440, and 3840x2160) across four settings presets (Low, Medium, High, and Ultra). The Medium preset is the only one with complete min/max data at all resolutions, providing the most detailed view of performance consistency.

At 1920x1080, the results are as follows: Low averages 142 FPS, Medium averages 126 FPS with a range of 107 to 145 FPS, High averages 86 FPS, and Ultra averages 58 FPS. The step from Low to Medium costs 16 FPS (11.3% drop), from Medium to High costs 40 FPS (31.7% drop), and from High to Ultra costs 28 FPS (32.6% drop). The 1080p Low result of 142 FPS is the highest of any measured configuration, showcasing the CPU's ability to drive high frame rates. The 1080p Ultra result of 58 FPS is just below the 60 FPS threshold, making it borderline playable.

At 2560x1440, Low averages 95 FPS, Medium averages 85 FPS with a range of 72 to 98 FPS, High averages 58 FPS, and Ultra averages 39 FPS. The drop from 1080p to 1440p at each preset is: Low loses 47 FPS (33.1% drop), Medium loses 41 FPS (32.5% drop), High loses 28 FPS (32.6% drop), and Ultra loses 19 FPS (32.8% drop). The consistent percentage drop across presets indicates a uniform resolution scaling factor, pointing to the GPU's fill rate and memory bandwidth as the main constraints. The 1440p High result of 58 FPS matches the 1080p Ultra result, showing that resolution and settings have roughly equivalent performance costs.

At 3840x2160, Low averages 55 FPS, Medium averages 49 FPS with a range of 41 to 56 FPS, High averages 33 FPS, and Ultra averages 23 FPS. The drop from 1440p to 4K at each preset is: Low loses 40 FPS (42.1% drop), Medium loses 36 FPS (42.4% drop), High loses 25 FPS (43.1% drop), and Ultra loses 16 FPS (41.0% drop). The 4K Medium average of 49 FPS is the only 4K result that approaches playable territory, but the minimum of 41 FPS suggests noticeable stutter in busy scenes. The 4K High result of 33 FPS and 4K Ultra result of 23 FPS are both well below acceptable playability for a smooth experience.

# FAQ

Q: What is the best resolution for this combo in Archeage?

A: The data shows 1920x1080 as the strongest resolution, with Low at 142 FPS, Medium at 126 FPS, High at 86 FPS, and Ultra at 58 FPS. All 1080p presets except Ultra exceed 60 FPS, making this resolution the most playable.

Q: How does the RX 9060 compare to its nearest GPU rivals?

A: The RX 9060 has an average benchmark score of 16,014, which is 0.7% below the NVIDIA GeForce RTX 3060 Ti (16,129) and 1% above both the AMD Radeon R9 370X (15,862) and AMD Radeon RX 7700 (15,852). Its percentile ranking is 59 among all GPUs.

Q: Is the Ryzen 9 5900X a bottleneck at 4K?

A: No. At 4K Ultra, the combo produces 23 FPS, which is far below what the CPU can support. The 5900X's Cinebench R23 multi-core score of 16,262 and 87th percentile ranking indicate it is not the limiting factor at 4K; the GPU is.

Q: What is the highest FPS measured for this combo?

A: The highest average FPS is 142, achieved at 1920x1080 with Low settings. The maximum FPS recorded in any row is 145, which appears in the 1080p Medium result alongside a minimum of 107.

Q: How does the combo rank among all tested combinations?

A: The combo ranks 1,603 out of 2,761 tested combos in Archeage. This places it in the 58th percentile, meaning 42% of tested combos perform better in this game.

Q: Can this combo handle Ultra settings at any resolution?

A: At 1080p Ultra, the average is 58 FPS, which is near the 60 FPS threshold. At 1440p Ultra, the average drops to 39 FPS, and at 4K Ultra, it falls to 23 FPS. Only 1080p Ultra is marginally playable.

# Settings Recommendations

Based on the measured FPS data, the optimal settings preset depends on the target resolution and desired frame rate. For 1920x1080, the High preset at 86 FPS average offers a strong balance between visual quality and smoothness, while the Medium preset at 126 FPS provides a significant frame rate boost with only a moderate reduction in visual fidelity. The Ultra preset at 58 FPS is playable but sits just below the 60 FPS mark, so players prioritizing frame rate consistency should stick with High.

At 2560x1440, the Medium preset at 85 FPS average is the recommended choice, as it delivers smooth gameplay with a minimum of 72 FPS. The High preset at 58 FPS is borderline, and players with 144 Hz displays will notice the difference. The Low preset at 95 FPS is an option for competitive play, but the visual trade-off is substantial. The Ultra preset at 39 FPS is not recommended for any scenario.

At 3840x2160, no preset delivers a fully smooth experience. The Low preset at 55 FPS is the closest to playable, but the Medium preset at 49 FPS with a minimum of 41 FPS may cause noticeable hitches in crowded areas. The High and Ultra presets at 33 and 23 FPS respectively are not viable for active gameplay. For 4K, the data suggests dropping to 1440p Medium or 1080p High for a better experience.

The best overall experience per the measured rows is 1080p High at 86 FPS, which balances visual quality with a comfortable frame rate margin. For players who prefer maximum smoothness, 1080p Medium at 126 FPS is the superior choice, with the minimum of 107 FPS ensuring minimal drops. The 1440p Medium preset at 85 FPS is the best option for higher-resolution displays, provided the user accepts a slight reduction in visual details compared to High.