Archeage

Resolution Scaling

The measured FPS data for ArcheAge with the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 3080 shows a clear and predictable scaling pattern as resolution increases. At 1080p with High settings, the combo delivers 122 FPS average. Moving to 1440p drops that to 82 FPS, a reduction of roughly 33%. At 4K, the average falls further to 47 FPS, which is about 61% below the 1080p figure. This steep decline indicates that the GPU becomes the primary limiting factor as pixel count rises, which is expected for a demanding MMORPG at higher resolutions.

The scaling behavior is even more pronounced at Ultra settings. At 1080p Ultra, the system averages 83 FPS. At 1440p Ultra, that number drops to 56 FPS, and at 4K Ultra, it plummets to 32 FPS. The gap between 1080p and 4K Ultra is a 61% performance loss. These numbers suggest that the RTX 3080's 10 GB of GDDR6X memory and its bandwidth are being pushed hard at 4K, especially with the highest preset enabled. The 4K Ultra result of 32 FPS is barely playable for most users, while 4K High at 47 FPS is more tolerable but still below the 60 FPS target that many gamers prefer.

At Low settings, the resolution scaling tells a different story. The combo achieves 202 FPS at 1080p, 136 FPS at 1440p, and 78 FPS at 4K. The 4K Low result is notably higher than the 4K High result, indicating that the game's graphical load at High settings is substantially heavier. The data shows that the CPU, with its 6 cores and 12 threads based on Zen 4 architecture, has enough headroom to feed the GPU at lower resolutions. At 1080p Low, the 202 FPS result suggests that the RTX 3080 is not the bottleneck; rather, the game engine or CPU limits the frame rate at that point. The drop from 202 FPS at 1080p to 136 FPS at 1440p is a 33% reduction, while the drop from 1440p to 4K is another 43% reduction. This indicates a transition from a CPU-bound scenario at 1080p to a GPU-bound scenario as resolution climbs.

How This Combo Ranks

In the benchmark database for ArcheAge, this specific combination of the AMD Ryzen 5 7500F and NVIDIA GeForce RTX 3080 ranks 1039 out of 3708 tested combos. That places it in the top 28% of all systems tested for this game. The percentile ranking for the CPU alone is 77, meaning the Ryzen 5 7500F outperforms 77% of all CPUs in the database. The GPU's percentile is 68, which is lower than the CPU's percentile, suggesting that the graphics card is the weaker link in this pairing for this particular title.

The CPU's nearest rivals in synthetic benchmarks help contextualize its performance. The AMD Ryzen 5 7500F has an average benchmark score of 24964. Its closest competitor, the Intel Core i7-11850H, scores 24935, which is just 0.1% lower. The AMD Ryzen 5 8400F scores 25005, a 0.2% advantage over the 7500F. The Intel Core i7-13620H is 0.2% behind, and the Intel Core 5 210H is 0.4% behind. These deltas are all within a fraction of a percent, meaning the 7500F sits at the center of a very tight cluster of similarly performing processors. For ArcheAge, this level of CPU performance is more than sufficient, as the game's frame rates at 1080p and 1440p are more likely limited by the GPU or engine.

The GPU's nearest rivals are less flattering. The RTX 3080 has an average benchmark score of 23172. The NVIDIA P106-100, AMD Radeon Pro Vega 16, AMD Radeon RX 6600M, and AMD Radeon R9 M290X all score within 0.4% of each other, with the RTX 3080 being slightly below them. This is an unusual grouping, as these are very different cards in terms of architecture and target market. The data suggests that the synthetic benchmark averages do not fully capture the RTX 3080's real-world gaming performance, which is typically far ahead of those older or lower-tier cards. In ArcheAge specifically, the RTX 3080's 10 GB VRAM and 760.3 GB/s bandwidth prove adequate for 1440p gaming but strain at 4K Ultra.

GPU Role

The NVIDIA GeForce RTX 3080 is built on the Ampere architecture with a GA102 chip fabricated on Samsung's 8 nm process. It contains 28,300 million transistors on a 628 mm² die. The card operates with a base clock of 1440 MHz and a boost clock of 1710 MHz. Memory runs at 1188 MHz, which translates to 19 Gbps effective on GDDR6X modules. The memory subsystem consists of 10 GB of GDDR6X on a 320-bit bus, yielding a bandwidth of 760.3 GB/s. This is a substantial amount of memory bandwidth, but ArcheAge's 4K Ultra preset appears to demand more than this card can deliver at playable frame rates.

The GPU's compute resources include 8704 shading units, 272 texture mapping units, and 96 raster output units. It also has 68 ray tracing cores and 272 tensor cores. The pixel rate is 164.2 GPixel/s, and the texture rate is 465.1 GTexel/s. The FP32 performance is rated at 29.77 TFLOPS. These raw specifications are capable of handling modern games, but ArcheAge's engine, which dates back to the game's 2014 release, may not be efficiently utilizing these resources.

In the context of ArcheAge, the RTX 3080's VRAM capacity of 10 GB is sufficient for 1080p and 1440p across all settings. At 4K, the VRAM is still adequate, but the 4K Ultra result of 32 FPS indicates that the GPU's compute throughput is the limiting factor. The boost clock of 1710 MHz is consistent across all resolutions, as the card will boost to its maximum when thermally and power limited. The data shows that the RTX 3080 is a capable card for this MMORPG at 1440p, delivering 82 FPS at High settings, but it falls below the 60 FPS threshold at 4K High and drops to 32 FPS at 4K Ultra.

Measured FPS Breakdown

The measured FPS data for ArcheAge with this combo covers four settings presets across three resolutions. At 1080p, the Low preset delivers an average of 202 FPS. The Medium preset yields 180 FPS with a minimum of 153 FPS and a maximum of 206 FPS. High settings produce 122 FPS average, while Ultra drops to 83 FPS. The progression from Low to Ultra at 1080p shows a 59% performance loss, which is significant but leaves the game very playable at all settings on a 1080p monitor.

At 1440p, the Low preset averages 136 FPS. Medium settings achieve 121 FPS with a minimum of 103 FPS and a maximum of 139 FPS. High settings produce 82 FPS, and Ultra drops to 56 FPS. The 1440p results indicate that this combo is well-suited for high-refresh-rate 1440p gaming at Low or Medium settings, and it can still maintain above 80 FPS at High. The Ultra preset at 56 FPS is borderline for competitive play but acceptable for casual gaming.

At 4K, the Low preset averages 78 FPS. Medium settings achieve 69 FPS with a minimum of 59 FPS and a maximum of 80 FPS. High settings produce 47 FPS, and Ultra drops to 32 FPS. The 4K results show that the RTX 3080 can handle ArcheAge at 4K only when settings are lowered. The Low preset at 78 FPS is playable, and Medium at 69 FPS is also reasonable. However, High and Ultra fall below the 60 FPS threshold, making them less desirable for smooth gameplay on a 4K display.

The Medium preset data is notable for having min and max FPS values recorded, which provide insight into frame time consistency. At 1080p Medium, the range from 153 to 206 FPS shows a variance of 53 FPS. At 1440p Medium, the range is 103 to 139 FPS, a variance of 36 FPS. At 4K Medium, the range is 59 to 80 FPS, a variance of 21 FPS. This tightening of the frame rate range at higher resolutions suggests that the GPU is more consistently loaded, reducing the CPU-induced spikes and dips that occur at lower resolutions.

FAQ

Q: What is the best resolution for this combo in ArcheAge?

A: The data shows that 1440p High settings deliver 82 FPS, which is above the 60 FPS threshold for smooth gameplay. At 1080p, all settings exceed 83 FPS, making it the most flexible resolution. For 4K, only Low and Medium settings stay above 60 FPS, with 78 FPS and 69 FPS respectively.

Q: How does the Ultra preset perform compared to High?

A: At 1080p, Ultra yields 83 FPS versus 122 FPS on High, a 32% reduction. At 1440p, Ultra gives 56 FPS versus 82 FPS on High, a 32% reduction. At 4K, Ultra gives 32 FPS versus 47 FPS on High, a 32% reduction. The relative penalty is consistent across resolutions.

Q: Is the CPU or GPU the bottleneck at 1080p?

A: At 1080p Low, the combo achieves 202 FPS, which is higher than at any other resolution. This suggests the GPU is not fully saturated at 1080p, and the CPU or game engine is likely the limiting factor at that resolution and settings combination.

Q: What is the combo's rank among all tested systems?

A: The combo ranks 1039 out of 3708 tested combinations for ArcheAge, placing it in the top 28% of all systems in the database.

Q: How much VRAM does the RTX 3080 have, and is it enough?

A: The RTX 3080 has 10 GB of GDDR6X memory. The measured FPS data shows that this capacity is sufficient for all tested settings and resolutions, as the game runs even at 4K Ultra, albeit at 32 FPS. No VRAM-related crashes or stalls were recorded.

Q: What is the average FPS at 1440p Medium settings?

A: At 1440p Medium, the average FPS is 121, with a minimum of 103 FPS and a maximum of 139 FPS. This makes it a strong choice for high-refresh-rate 1440p monitors.

Settings Recommendations

Based on the measured FPS data, the optimal settings depend on the target display resolution and frame rate preference. For 1080p gaming, the Ultra preset at 83 FPS is entirely playable and provides the best visual fidelity without dropping below the 60 FPS threshold. However, the High preset at 122 FPS offers a significant boost in smoothness while still maintaining high visual quality. For players with 144Hz or higher refresh rate monitors, the Medium preset at 180 FPS is the best choice, as it maximizes frame rate while keeping visuals acceptable. The Low preset at 202 FPS offers marginal gains over Medium and is only recommended for competitive play where maximum frame rate is paramount.

For 1440p displays, the High preset at 82 FPS provides the best balance of visual quality and performance. It stays comfortably above 60 FPS, making it suitable for most gaming scenarios. The Medium preset at 121 FPS is ideal for high-refresh-rate 1440p monitors, as it delivers a smooth experience without sacrificing too much visual detail. The Ultra preset at 56 FPS is borderline and should only be used if visual fidelity is prioritized over frame rate consistency. The Low preset at 136 FPS is viable for competitive play, but the visual downgrade is noticeable.

For 4K displays, the Medium preset at 69 FPS is the recommended choice, as it is the only preset that stays above 60 FPS while providing decent visual quality. The Low preset at 78 FPS is also playable and offers a higher frame rate, but the visual compromise is significant. The High preset at 47 FPS and Ultra at 32 FPS are not recommended for smooth gameplay, as both fall below the 60 FPS threshold and will result in noticeable stuttering and input lag. Players with 4K monitors should either accept Medium settings or consider lowering the resolution to 1440p for a better experience. The data clearly indicates that this combo is best suited for 1080p and 1440p gaming in ArcheAge, with 4K playable only at reduced settings.