Archeage
This combination provides smooth gameplay with an average of 65 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 24 | 28 | 44 | 48 |
| 1440p QHD | 39 | 55 | 78 | 91 |
| 1080p Full HD | 52 | 77 | 115 | 131 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 5 5600GT + AMD Radeon RX 7600, In-Depth Analysis
The AMD Ryzen 5 5600GT and AMD Radeon RX 7600 pairing delivers a playable but uneven experience in Archeage, a 2014 MMORPG. The data shows a clear pattern: performance collapses at 4K Ultra (23.6 FPS) but becomes fluid at 1080p Low (130.9 FPS). The processor’s six cores and twelve threads, based on the Zen 3 Cezanne architecture, provide strong single-threaded performance for an aging MMO. The GPU, with its 8 GB of GDDR6 memory on a 128-bit bus, handles lower resolutions well but struggles when pixel count and settings rise together. This analysis breaks down the measured frames to explain where the bottleneck shifts.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 5 5600GT is a 6-core, 12-thread processor with a base clock of 3.60 GHz and a boost clock of 4.60 GHz. It uses the Zen 3 architecture, built on a 7 nm process by TSMC, with 16 MB of L3 cache. For Archeage, an MMORPG from 2014, the single-thread performance matters more than raw core count. The CPU’s single-thread benchmark scores support this: 913 in 3dmark_single_thread, 245 in Cinebench R15 single-core, and 1023 in Cinebench R20 single-core. These numbers indicate a capable processor for games that rely on one or two main threads, as many MMOs do.
The multi-thread results show the CPU is no slouch either. Cinebench R23 multi-core scores 17272, while Geekbench multi-core reaches 7986. PassMark multithread is 20325, placing it in the 78th percentile versus all CPUs. The nearest rivals are tight: the Intel Core i7-10700 scores 20746 (0% delta), the AMD Ryzen 5 5600X scores 20680 (0.3% faster), and the Intel Core i5-12490F scores 20794 (0.3% slower). This means the 5600GT sits squarely in mid-range desktop territory. For Archeage, the 12 threads allow background tasks, voice chat, or streaming to run without starving the game’s primary threads. The 65 W TDP and AM4 socket make it an efficient choice, but the benchmark data does not show a scenario where the CPU becomes the limiting factor at 1080p.
At 1080p Low, the combo hits 130.9 FPS, which is far above the 60 FPS threshold for smooth play. Even at 1440p Low, it reaches 91 FPS. These results suggest the CPU can feed the GPU adequately at lower settings. However, at 4K Ultra, the frame rate drops to 23.6 FPS, which is far below playable. The question is whether the CPU or GPU is responsible for this collapse. The CPU’s single-thread score of 2438 in Cinebench R23 is respectable, but the game’s engine, dating from 2014, may not scale well with modern multi-core designs. The data indicates the CPU is not the primary bottleneck at high resolutions—the GPU’s workload increases exponentially with pixel count, and the RX 7600’s 8 GB VRAM becomes a constraint. The processor’s 3.60 GHz base clock and 4.60 GHz boost provide enough headroom for Archeage’s typical MMO scenes, which often have many characters but not extreme draw distances.
GPU Role — VRAM, clocks, and how they relate to this game's results
The AMD Radeon RX 7600 uses the Navi 33 chip with RDNA 3.0 architecture, built on a 6 nm TSMC process. It has 8 GB of GDDR6 memory on a 128-bit bus, delivering 288.0 GB/s of bandwidth. The base clock is 1720 MHz, boost clock is 2655 MHz, and game clock is 2250 MHz. The memory runs at 2250 MHz, or 18 Gbps effective. This GPU sits in the 63rd percentile versus all GPUs, with an average benchmark score of 20258. Its nearest rivals are the RX 7600 XT (0.6% faster), RX 460 (0.8% faster), RTX 3070 Mobile (1.3% slower), and Intel Arc B570 (1.5% slower). The RX 7600’s 2048 shading units and 64 ROPs handle pixel-heavy workloads, but the 8 GB VRAM is the critical limit.
In Archeage, the VRAM usage grows with texture quality and resolution. At 1080p, the GPU has enough bandwidth and capacity to maintain high frame rates: 130.9 FPS at Low, 114.7 FPS at Medium, and 76.9 FPS at High. These numbers show the GPU scales well up to 1440p, where Low hits 91 FPS and Medium reaches 78 FPS. However, at 4K, the picture changes dramatically. High settings drop to 28.3 FPS, Medium to 44.3 FPS, and Low to 48 FPS. The 4K Ultra setting (23.6 FPS) is nearly unplayable. The 8 GB VRAM is likely insufficient for 4K textures, forcing the GPU to swap data from system memory, which the 128-bit bus cannot handle efficiently. The bandwidth of 288.0 GB/s is decent for 1080p but becomes a choke point at 4K, where the pixel fill rate (169.9 GPixel/s) is overwhelmed.
The GPU’s PassMark DirectX 11 score of 172 is relevant because Archeage uses DirectX 11. The DirectX 12 score is lower at 58, which suggests the game may not leverage newer APIs. This explains why the GPU performs well at low resolutions but fails at 4K Ultra—the engine’s draw calls and texture streaming are not optimized for high pixel counts. The RX 7600’s 32 RT cores and 21.75 TFLOPS FP32 performance are modern, but the game does not use ray tracing or advanced features. The data shows the GPU is the limiting component at 4K, while the CPU holds up at lower resolutions.
FAQ
Q: Does the AMD Ryzen 5 5600GT bottleneck the RX 7600 in Archeage?
A: No, the CPU does not bottleneck the GPU at lower resolutions. At 1080p Low, the combo achieves 130.9 FPS, and at 1440p Low, it reaches 91 FPS. The CPU’s single-thread score of 2438 in Cinebench R23 is sufficient for this 2014 MMO. The bottleneck appears only at 4K, where the GPU’s 8 GB VRAM and 128-bit bus limit performance.
Q: What is the best resolution for this combo in Archeage?
A: 1080p is the sweet spot. At Medium settings, the average FPS is 114.7, and at High, it drops to 76.9. Both are playable. At 1440p, Medium (78 FPS) is still smooth, but High (55.3 FPS) is borderline. 4K is not recommended—even Low settings only reach 48 FPS.
Q: How does the RX 7600 compare to its nearest rival, the RX 7600 XT?
A: The RX 7600 XT is 0.6% faster in average benchmark score (20146 vs 20258 for the RX 7600). This small difference means the two GPUs will perform nearly identically in Archeage. The RX 7600’s 8 GB VRAM is the same, so 4K performance would be similar.
Q: Is the 5600GT’s integrated graphics useful for this game?
A: The 5600GT includes Radeon Vega 7 integrated graphics, but the benchmark data uses the RX 7600. The integrated GPU is not relevant for gaming with a discrete card installed. The CPU’s 78th percentile ranking versus all CPUs suggests it is a strong mid-range processor.
Q: Why does 4K Ultra perform so poorly (23.6 FPS) when 1080p Low hits 130.9 FPS?
A: The 4K resolution quadruples the pixel count from 1080p, requiring the GPU to process far more fragments. The RX 7600’s 8 GB VRAM is insufficient for 4K textures, and its 288.0 GB/s bandwidth cannot keep up. The GPU’s pixel rate of 169.9 GPixel/s is overwhelmed at 3840x2160.
Q: What settings should a user avoid?
A: Avoid 4K Ultra (23.6 FPS) and 4K High (28.3 FPS). These are unplayable. At 1440p, Ultra (38.6 FPS) is also below the 60 FPS threshold. Stick to 1080p with Medium or High, or 1440p with Low or Medium.
Measured FPS Breakdown
The measured data covers three resolutions and four settings levels. At 1920x1080, the Low preset delivers the highest average FPS at 130.9. Medium follows at 114.7 FPS, High at 76.9 FPS, and Ultra drops to 52.1 FPS. This is a smooth progression—each step down in settings yields a noticeable jump in performance. The gap between Low and Medium is 16.2 FPS, while the gap between High and Ultra is 24.8 FPS. This suggests the Ultra preset introduces heavy effects like shadows and anti-aliasing that tax the GPU.
At 2560x1440, the pattern shifts. Low averages 91 FPS, Medium 78 FPS, High 55.3 FPS, and Ultra 38.6 FPS. The drop from Low to Medium is 13 FPS, but from Medium to High, it is 22.7 FPS. The High preset at 1440p is the first point where the frame rate falls below 60 FPS, indicating the GPU’s limits. Ultra at this resolution is 38.6 FPS, which is playable only for turn-based or slow-paced content.
At 3840x2160, performance collapses. Low averages 48 FPS, Medium 44.3 FPS, High 28.3 FPS, and Ultra 23.6 FPS. The difference between Low and Medium is only 3.7 FPS, showing that the GPU is already saturated. High and Ultra are both below 30 FPS, making them unplayable for most users. The data suggests that 4K is not viable for this combo in Archeage, regardless of settings.
The full table is as follows: 1080p Low (130.9), 1080p Medium (114.7), 1080p High (76.9), 1080p Ultra (52.1), 1440p Low (91), 1440p Medium (78), 1440p High (55.3), 1440p Ultra (38.6), 4K Low (48), 4K Medium (44.3), 4K High (28.3), 4K Ultra (23.6). These numbers are measured, not estimated, and they reveal a GPU that excels at 1080p but fails at 4K.
Resolution Scaling
The FPS drop from 1080p to 4K is stark. At Low settings, the average FPS goes from 130.9 at 1080p to 91 at 1440p (a 30.5% drop) and then to 48 at 4K (a 63.3% drop from 1080p). At Medium settings, the progression is 114.7 to 78 to 44.3, with the 4K value being 61.4% lower than 1080p. At High, the numbers are 76.9, 55.3, and 28.3—the 4K value is 63.2% lower. At Ultra, 52.1 drops to 38.6 and then 23.6, a 54.7% total decline.
These scaling patterns indicate the GPU is the limiting component. If the CPU were the bottleneck, the frame rates would stay relatively flat across resolutions, but they do not. The RX 7600’s bandwidth of 288.0 GB/s and 8 GB VRAM cannot sustain 4K. The pixel fill rate of 169.9 GPixel/s is also insufficient for 3840x2160. The data shows that the drop from 1440p to 4K is steeper than from 1080p to 1440p—for example, at High settings, the drop is 27 FPS (55.3 to 28.3) versus 21.6 FPS (76.9 to 55.3). This nonlinear scaling points to a VRAM or bandwidth wall at 4K.
At 1080p, the CPU and GPU are well-balanced—the frame rates are high enough that neither component is clearly starving the other. At 1440p, the GPU starts to strain, but the frame rates remain playable at Low and Medium. At 4K, the GPU is overwhelmed, and the CPU’s performance is irrelevant because the GPU cannot render frames fast enough. The resolution scaling analysis suggests that Archeage’s engine, from 2014, does not scale efficiently to 4K with this hardware.
Settings Recommendations
The best experience per the measured rows is 1080p Medium,
Hardware Specifications
AMD Ryzen 5 5600GT
AMD Radeon RX 7600
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5600GT + AMD Radeon RX 7600 in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 48.0 |
| 3840x2160 | Medium | 44.3 |
| 3840x2160 | High | 28.3 |
| 3840x2160 | Ultra | 23.6 |
| 2560x1440 | Low | 91.0 |
| 2560x1440 | Medium | 78.0 |
| 2560x1440 | High | 55.3 |
| 2560x1440 | Ultra | 38.6 |
| 1920x1080 | Low | 130.9 |
| 1920x1080 | Medium | 114.7 |
| 1920x1080 | High | 76.9 |
| 1920x1080 | Ultra | 52.1 |
Archeage with Ryzen 5 5600GT + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RX 7600 + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 5 5600GT + RX 7600
Explore FPS benchmarks for other games using this same hardware combination.