Archeage

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured FPS data for ArcheAge with the AMD Ryzen 5 5600G and NVIDIA GeForce RTX 4080 reveals a predictable yet telling pattern as resolution climbs. At 1080p with Low settings, the combo delivers 211 FPS, but stepping up to 1440p drops that to 181 FPS, and 4K Low further reduces it to 104 FPS. That is a substantial 107 FPS difference between 1080p and 4K at the lowest preset, representing roughly a 49% reduction in frame rate. The scaling is consistent across presets: at High settings, the drop from 163 FPS at 1080p to 110 FPS at 1440p, then to 63 FPS at 4K, shows the GPU becoming progressively more burdened as pixel count rises.

The pattern strongly indicates that the RTX 4080 is the limiting component at higher resolutions, particularly at 4K Ultra where the combo only manages 43 FPS. At 1080p, however, the data tells a different story. The relatively small gaps between Low (211 FPS), Medium (203 FPS), and High (163 FPS) at 1080p suggest that the CPU may be constraining performance even at this resolution, since a GPU-limited scenario would typically show larger differences between settings at the same resolution. The RTX 4080, with its 48.74 TFLOPS FP32 performance and 716.8 GB/s memory bandwidth, is clearly capable of far higher frame rates than what the 5600G can feed it at 1080p.

The jump from 1440p Medium (161 FPS) to 4K Medium (92 FPS) represents a 43% drop, while the equivalent jump at Ultra settings shows a 43% drop as well (75 to 43 FPS). This consistency across presets reinforces that resolution scaling is the dominant factor here, with the GPU's rendering load scaling nearly linearly with pixel count. The 4K Ultra result of 43 FPS is particularly telling — it suggests that ArcheAge's Ultra preset includes effects that are extremely demanding on the RTX 4080's 16 GB of GDDR6X memory, pushing the combo to its limits.

How This Combo Ranks — use comboRankInGame vs other tested combos

The AMD Ryzen 5 5600G paired with the NVIDIA GeForce RTX 4080 achieves a combo rank of 363 out of 3,708 tested combinations in ArcheAge. This places it in the top 10% of all combos tested for this game, which is a strong showing given the CPU's mid-range positioning. The Ryzen 5 5600G ranks in the 74th percentile among all CPUs, while the RTX 4080 sits in the 86th percentile among all GPUs. The combination of a 74th-percentile CPU with an 86th-percentile GPU results in a combo that outperforms the vast majority of systems tested, though it does not crack the top 100.

The data suggests that the 5600G is the weaker link in this pairing. The CPU's nearest rivals include the Intel Core i3-1220P (0.1% higher average score), the Intel Core Ultra 7 256V (0.1% lower), the AMD Ryzen 5 7530U (0.2% lower), and the Intel Core Ultra 7 155U (0.4% lower). These are all mobile or low-power processors, which underscores that the 5600G's desktop 65W TDP and Zen 3 architecture provide competitive performance but not top-tier muscle. The 6-core, 12-thread configuration with a 3.90 GHz base and 4.40 GHz boost clock delivers solid multithreaded results, as evidenced by its Cinebench R23 multicore score of 10,551, but it trails far behind higher-end desktop CPUs.

On the GPU side, the RTX 4080's nearest rivals are remarkably close in average score: the RTX 4080 SUPER (0.1% higher), the AMD Radeon Pro W5700X (1.1% higher), the AMD Radeon RX 6750 GRE 12 GB (2.6% higher), and the AMD Radeon 8060S (2.7% higher). This clustering indicates that the RTX 4080 is well-positioned among high-end GPUs, but the differences are minimal. The GPU's 86th percentile ranking reflects its strong but not absolute top-tier status. In ArcheAge specifically, the combo rank of 363 suggests that while the GPU dominates most scenarios, certain CPU-bound situations — likely in crowded MMORPG zones — prevent this combo from climbing higher.

FAQ

Q: What is the best resolution for this combo in ArcheAge?

A: The data shows 1440p High provides 110 FPS, which is well above the 60 FPS threshold for smooth gameplay. At 4K High, the combo drops to 63 FPS, which is still playable but noticeably lower. For maximum visual quality while maintaining high frame rates, 1440p represents the sweet spot.

Q: Is the RTX 4080 being held back by the Ryzen 5 5600G?

A: Benchmark results indicate yes, particularly at 1080p. The difference between 1080p Low (211 FPS) and 1440p Low (181 FPS) is only 30 FPS, which is smaller than expected if the GPU were fully utilized. At 4K, the gaps between settings widen significantly, suggesting the GPU becomes the primary limiter at higher resolutions.

Q: How does the 5600G's single-thread performance impact ArcheAge?

A: The CPU's single-thread score of 872 in 3DMark and 1,409 in Cinebench R23 is moderate. MMORPGs like ArcheAge often rely on single-thread performance for game logic and networking. The 4.40 GHz boost clock helps, but the data shows the CPU's overall 74th percentile ranking, which may cause occasional frame drops in crowded areas.

Q: What is the FPS difference between Low and Ultra settings at 1440p?

A: At 1440p, Low settings produce 181 FPS, while Ultra settings drop to 75 FPS. This 106 FPS difference represents a 59% reduction from Low to Ultra, indicating that Ultra settings impose a significant rendering load on the RTX 4080.

Q: Does the 16 GB VRAM of the RTX 4080 matter for ArcheAge?

A: The 16 GB of GDDR6X memory with 716.8 GB/s bandwidth is far more than ArcheAge likely requires, given the game's 2014 release date. The 4K Ultra result of 43 FPS suggests that VRAM is not the bottleneck — rather, the computational demands of Ultra settings at 4K are what limit performance.

Q: How does this combo compare to others in the database?

A: With a rank of 363 out of 3,708 combos, this pairing outperforms roughly 90% of tested systems in ArcheAge. The GPU's 86th percentile ranking is higher than the CPU's 74th percentile, confirming that the 5600G is the limiting factor in this pairing.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

At 1920x1080, the measured FPS values are as follows: Low settings average 211 FPS, Medium averages 203 FPS with a minimum of 173 and maximum of 234, High averages 163 FPS, and Ultra averages 111 FPS. The spread between Low and Ultra is exactly 100 FPS, with Ultra delivering 53% of the Low setting's frame rate. The Medium preset's 173 FPS minimum is notable — it suggests that even at 1080p, there are moments where the system dips below the 200 FPS mark, likely due to CPU limitations in complex scenes.

At 2560x1440, the pattern continues with lower absolute numbers. Low settings average 181 FPS, Medium averages 161 FPS (minimum 137, maximum 186), High averages 110 FPS, and Ultra averages 75 FPS. The drop from Low to Ultra is 106 FPS, with Ultra delivering 41% of Low's performance. The Medium preset's minimum of 137 FPS indicates that even mid-range settings can see significant dips in demanding situations, though the average remains above 60 FPS for all presets.

At 3840x2160, the 4K results show the most dramatic differences. Low settings average 104 FPS, Medium averages 92 FPS (minimum 79, maximum 106), High averages 63 FPS, and Ultra averages 43 FPS. The gap between Low and Ultra is 61 FPS, with Ultra delivering only 41% of Low's frame rate. The Medium preset's minimum of 79 FPS is still playable, but the Ultra preset's 43 FPS average falls below the 60 FPS threshold that many players consider acceptable. Notably, the 4K Medium minimum of 79 FPS is higher than the 4K High average of 63 FPS, indicating that the step from Medium to High is particularly punishing at this resolution.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 4080 brings substantial hardware to ArcheAge: 16 GB of GDDR6X memory on a 256-bit bus, providing 716.8 GB/s of bandwidth. The GPU operates at a base clock of 2205 MHz and boosts to 2505 MHz, with memory running at 1400 MHz (22.4 Gbps effective). These specifications translate to 48.74 TFLOPS of FP32 performance, 280.6 GPixel/s pixel rate, and 761.5 GTexel/s texture rate. For a game released in 2014, this hardware is dramatically over-provisioned, which explains why even 4K Medium settings achieve 92 FPS.

The GPU's 86th percentile ranking among all GPUs is reflected in the measured results. The RTX 4080's nearest rival, the RTX 4080 SUPER, scores only 0.1% higher on average, indicating that the non-SUPER variant is essentially at parity. The AMD Radeon Pro W5700X scores 1.1% higher, while the Radeon RX 6750 GRE 12 GB and Radeon 8060S score 2.6% and 2.7% higher, respectively. These small deltas suggest that the RTX 4080 is not just adequate but genuinely competitive with the next tier of GPUs.

In ArcheAge specifically, the GPU's role becomes dominant at 4K. The step from 1440p Ultra (75 FPS) to 4K Ultra (43 FPS) is a 43% reduction, which aligns with the 2.25x increase in pixel count (3,686,400 to 8,294,400 pixels). This near-linear scaling confirms that the GPU is fully utilized at 4K Ultra. However, at 1080p, the GPU is likely underutilized — the 111 FPS at Ultra suggests the CPU is preventing the GPU from reaching its full potential, since the RTX 4080 is theoretically capable of far higher frame rates in a 2014 MMORPG.

Settings Recommendations — which preset gives the best experience per the measured rows

Based on the measured FPS data, the Medium preset offers the best balance of visual quality and performance across all resolutions. At 1080p, Medium delivers 203 FPS average with a minimum of 173 FPS — both figures are far above the 60 FPS threshold, and the 173 FPS minimum ensures consistent smoothness even in demanding scenes. At 1440p, Medium produces 161 FPS average with a 137 FPS minimum, still maintaining excellent headroom above 60 FPS. Even at 4K, Medium achieves 92 FPS average with a 79 FPS minimum, which remains comfortably playable on high refresh rate displays.

The High preset is a reasonable alternative for those prioritizing visual fidelity, but the data shows a significant penalty. At 1440p, High drops to 110 FPS — a 32% reduction from Medium — and at 4K, High falls to 63 FPS, which is right at the edge of the 60 FPS playability threshold. The Ultra preset is not recommended at any resolution above 1080p: it delivers only 75 FPS at 1440p and 43 FPS at 4K, both of which are below optimal for smooth gameplay. At 1080p, Ultra's 111 FPS is playable, but the 92 FPS drop from Medium to Ultra (203 to 111) does not justify the visual gains for most players.

For players with 4K displays, the Medium preset at 92 FPS is the clear winner among the measured options. The Low preset at 4K offers 104 FPS, but the visual quality reduction is substantial for only 12 FPS more. The 1440p Medium preset's 161 FPS average is the best combination of high frame rate and acceptable visual quality, making it the recommended default for this combo.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 5600G is a 6-core, 12-thread processor based on the Zen 3 architecture (Cezanne codename) built on TSMC's 7 nm process. It operates at a base clock of 3.90 GHz and boosts to 4.40 GHz, with a 65W TDP. The CPU features 64 KB of L1 cache per core, 512 KB of L2 cache per core, and 16 MB of shared L3 cache. Its memory bandwidth is rated at 51.2 GB/s over dual-channel DDR4. These specifications place it in the 74th percentile among all CPUs, with an average benchmark score of 21,088.

The CPU's benchmark results provide context for its gaming performance. Its Cinebench R23 multicore score of 10,551 and single-core score of 1,409 are moderate for desktop processors. The 3DMark scores show scaling from 872 (single-thread) to 5,455 (max threads), indicating that the 6-core/12-thread design provides good multithreaded scaling. The PassMark multithread score of 19,717 and single-thread score of 3,177 further confirm its mid-range positioning. The CPU's nearest rivals — the Intel Core i3-1220P (0.1% higher) and Intel Core Ultra 7 256V (0.1% lower) — are all mobile processors, which highlights that the 5600G's desktop performance is competitive but not exceptional.

In ArcheAge, the CPU's role is most evident at 1080p, where the differences between Low (211 FPS), Medium (203 FPS), and High (163 FPS) are relatively small compared to the GPU-limited scenarios at 4K. This pattern suggests that at 1080p, the 5600G's 6 cores and 12 threads are sufficient to feed the RTX 4080 most of the time, but the CPU's single-thread performance — a 3DMark single-thread score of 872 — may create occasional bottlenecks in CPU-heavy MMO scenarios like large player gatherings. The 4.40 GHz boost clock helps mitigate this, but the CPU's 74th percentile ranking means it is not the ideal pairing for an 86th-percentile GPU. The data implies that for this combo to reach its full potential at 1080p, a stronger CPU with higher single-thread performance would be needed.