Archeage

The AMD Ryzen 5 5600G paired with the NVIDIA GeForce RTX 4080 SUPER delivers a mid-pack result in ArcheAge, ranking 153rd out of 1,727 tested CPU-GPU combinations. This places the combo in the top 9% of all tested configurations, though the ranking reflects the game’s modest threading demands rather than raw hardware limits. The CPU sits at the 78th percentile versus all tested processors, while the GPU ranks at the 88th percentile, indicating the graphics card is the stronger component in this pairing. Benchmark results show the combo handles 1080p and 1440p with high frame rates, but 4K Ultra becomes demanding, suggesting the GPU carries most of the load while the CPU remains sufficient for ArcheAge’s engine.

How This Combo Ranks

The combo rank of 153 out of 1,727 tested combinations places this system firmly in the upper tier of results, though not at the absolute top. A rank in the top 9% of all combos indicates the pairing is well-balanced for this MMORPG, but the game’s 2014 release date means modern high-end hardware is not fully stressed. The CPU’s average benchmark score of 19,983 sits within 0.3% of its nearest rivals: the Intel Core i7-11600H scores 19,949 (0.2% behind), the Intel Core i7-11800H scores 20,024 (0.2% ahead), and the AMD EPYC 7713P also scores 20,024 (0.2% ahead). This tight clustering shows the Ryzen 5 5600G delivers performance nearly identical to those alternatives, despite being a desktop part with 6 cores and 12 threads. The GPU’s average benchmark score of 53,610 places it just 0.2% ahead of the AMD Radeon RX 6900 XT at 53,489, and 0.4% ahead of the AMD Radeon Pro W6600M at 53,414. The NVIDIA GeForce RTX 5070 Ti trails by 2.9% at 52,086, while the AMD Radeon RX 7700S is 2.1% behind at 52,505. These margins are small, indicating the RTX 4080 SUPER is competitive with top-tier cards from the same era, but ArcheAge’s engine does not leverage the full potential of either component. The CPU’s single-thread score of 872 in 3DMark and 2,365 in Cinebench R23 suggests adequate per-core performance for the game’s logic, while the GPU’s PassMark G3D score of 34,245 shows ample graphics throughput. In practice, the combo ranks higher than its individual component percentiles might suggest, meaning ArcheAge rewards the GPU more than the CPU.

Settings Recommendations

The measured frame rates across four presets and three resolutions provide clear guidance for optimal settings. At 1080p, the Low preset delivers 209.9 FPS, Medium reaches 202.0 FPS, and High drops to 161.6 FPS, while Ultra falls to 107.8 FPS. The gap between Low and Medium is just 7.9 FPS, making Medium the better choice for most users since it nearly matches Low performance while offering improved visuals. High still exceeds 160 FPS, so it remains viable for high-refresh-rate displays, but Ultra’s drop to 107.8 FPS represents a 34% reduction from High, which is a steep cost for marginal visual gains. At 1440p, Low achieves 181.5 FPS, Medium 161.2 FPS, High 108.0 FPS, and Ultra 76.4 FPS. The delta between High and Medium is 53.2 FPS, a significant jump that makes Medium the sweet spot for 1440p gaming, as it maintains over 160 FPS while High still clears 100 FPS. Ultra at 76.4 FPS is playable but below the smoother range of the other presets. At 4K, the results shift dramatically: Low produces 106.1 FPS, Medium 91.9 FPS, High 65.2 FPS, and Ultra 40.8 FPS. Here, Low is the only preset that comfortably exceeds 100 FPS, while Medium stays above 90 FPS. High at 65.2 FPS is acceptable for slower-paced MMORPG play, but Ultra at 40.8 FPS falls below the 60 FPS threshold many consider minimum for smooth gameplay. The data indicates that Medium provides the best balance across all resolutions: it holds 202 FPS at 1080p, 161.2 FPS at 1440p, and 91.9 FPS at 4K, with the smallest relative penalty versus Low. For users prioritizing frame rate above all, Low at 4K offers 106.1 FPS, but Medium’s visual improvements are worth the 14.2 FPS loss at that resolution.

Resolution Scaling

Frame rate scaling from 1080p to 4K reveals which component becomes the bottleneck. At Medium settings, 1080p yields 202.0 FPS, 1440p yields 161.2 FPS, and 4K yields 91.9 FPS. The drop from 1080p to 1440p is 40.8 FPS (20.2% lower), while the drop from 1440p to 4K is 69.3 FPS (43.0% lower). This accelerating decline is typical of GPU-bound scenarios, where pixel count outpaces the graphics card’s fill rate. The RTX 4080 SUPER’s 16 GB of GDDR6X memory and 736.3 GB/s bandwidth are sufficient for 4K, but the game’s engine appears to scale poorly with resolution at higher presets. At High settings, 1080p produces 161.6 FPS, 1440p 108.0 FPS, and 4K 65.2 FPS. The 1080p-to-1440p drop is 53.6 FPS (33.2% lower), and the 1440p-to-4K drop is 42.8 FPS (39.6% lower). Notably, the High preset shows a more linear decline than Medium, suggesting the CPU begins to matter more at lower resolutions. At 1080p High, the 161.6 FPS is likely CPU-limited, as the Ryzen 5 5600G’s single-thread performance becomes the constraint. Evidence for this is the relatively small gap between 1080p and 1440p at Low settings: 209.9 FPS versus 181.5 FPS, a 28.4 FPS difference (13.5% lower). This smaller drop indicates the CPU is holding back performance at 1080p Low, since the GPU has headroom but the CPU cannot feed it faster. At 4K Low, the 106.1 FPS is 49.5% lower than 1080p Low, which is a larger relative drop than Medium’s 54.5% decline. Overall, the data indicates the RTX 4080 SUPER becomes the limiting factor at 4K and even at 1440p High, while the Ryzen 5 5600G limits frame rates at 1080p with lower presets. The Ultra preset shows the most severe scaling: 107.8 FPS at 1080p, 76.4 FPS at 1440p, and 40.8 FPS at 4K, with the 4K figure representing just 37.8% of the 1080p result. This steep drop-off suggests Ultra settings include effects that disproportionately tax the GPU’s shading units and memory bandwidth.

FAQ

Q: Is this combo better suited for 1080p or 4K gaming in ArcheAge?

A: The combo excels at 1080p and 1440p, with Medium settings producing 202.0 FPS and 161.2 FPS respectively. At 4K, Medium drops to 91.9 FPS, and Ultra falls to 40.8 FPS, so 4K is playable only on Low or Medium presets.

Q: How does the Ryzen 5 5600G compare to its nearest CPU rivals?

A: The CPU’s average benchmark score of 19,983 is nearly identical to the Intel Core i7-11600H at 19,949 (0.2% behind) and the Intel Core i7-11800H at 20,024 (0.2% ahead). This means performance is effectively interchangeable in this game.

Q: What is the best preset for maintaining 60+ FPS at 4K?

A: Medium at 91.9 FPS and High at 65.2 FPS both exceed 60 FPS at 4K. Low reaches 106.1 FPS, but Ultra at 40.8 FPS is the only preset that fails to hit 60 FPS.

Q: Does the RTX 4080 SUPER’s 16 GB VRAM matter for ArcheAge?

A: The 16 GB of GDDR6X memory with 736.3 GB/s bandwidth is far beyond what ArcheAge requires, as evidenced by the 4K Ultra result of 40.8 FPS. The bottleneck is the GPU’s compute throughput, not memory capacity.

Q: Which component limits performance at 1080p Low settings?

A: The 209.9 FPS at 1080p Low is likely CPU-limited, since the Ryzen 5 5600G’s 3DMark single-thread score of 872 and Cinebench R23 single-core score of 2,365 cap how quickly the game logic can be processed. The GPU has ample headroom at this resolution.

Q: How does this combo rank against all tested configurations?

A: It ranks 153rd out of 1,727 combos, placing it in the top 9% overall. This is a strong result, but the game’s age means many cheaper combos achieve similar frame rates.

GPU Role

The NVIDIA GeForce RTX 4080 SUPER is the dominant component in this pairing, with an average benchmark score of 53,610 and a percentile rank of 88 versus all GPUs. Its nearest rival, the AMD Radeon RX 6900 XT, scores 53,489 (0.2% behind), showing the two cards are effectively matched in synthetic tests. The GPU’s 16 GB of GDDR6X memory operates at 736.3 GB/s across a 256-bit bus, with memory clocks at 1438 MHz (23 Gbps effective). The base clock is 2295 MHz, boosting to 2550 MHz, which contributes to the 52.22 TFLOPS of FP32 compute. In ArcheAge, the GPU’s role is most evident at higher resolutions: at 4K Ultra, frame rates collapse to 40.8 FPS, while 4K Low reaches 106.1 FPS. This 65.3 FPS spread across presets highlights how the game’s graphical settings—likely shadows, draw distance, and effects—scale with GPU load. The RTX 4080 SUPER’s 80 RT cores and 320 tensor cores are largely unused in this title, as ArcheAge does not employ ray tracing or DLSS features. The 112 ROPs and 320 TMUs provide the pixel and texture throughput needed for high resolutions, but the game’s engine appears to bottleneck on shader complexity rather than memory bandwidth. At 1080p, the GPU’s advantage is muted by the CPU: even at Ultra, 107.8 FPS is achieved, but lowering to Medium only raises this to 202.0 FPS, indicating the CPU cannot fully saturate the GPU at lower settings. The GPU’s PassMark G3D score of 34,245 and DirectX 12 score of 134 reflect strong API performance, though ArcheAge likely uses an older DirectX 11 path. The GPU’s 320 W TDP and triple-slot cooler are overkill for this game, but the headroom ensures stable frame times even in crowded MMORPG scenarios. The 88th percentile ranking means this GPU outperforms 88% of tested cards, yet in ArcheAge, the combo rank of 153 out of 1,727 suggests the game’s CPU demands are modest enough that a weaker GPU would yield similar results at 1080p.